TURTLE BEACH STEALTH 500 HWAA0005 (01) PDF Document

Step 1. Connect the wireless transmitter to the USB port on your Xbox.

Step 2. Power on the headset.

Step 3. Wait for the headset and USB wireless transmitter to pair.

Step 1. Connect the wireless transmitter to the USB port on your PlayStation, PC, or Nintendo Switch.

Step 2. Power on the headset.

Step 3. Wait for the headset and USB wireless transmitter to pair.

Please make sure your headset is updated with the latest firmware. Download the Swarm™ II mobile app for Android or iOS to update your headset to the latest firmware and customize settings. Alternatively, you can use the Swarm™ II desktop software for Windows.

EQ Mode Button: Press to change the equalizer mode.

Power Button, Superhuman Hearing: Press for 2 seconds to power the headset on or off. Press for 1 second to toggle Superhuman Hearing on or off.

LED Status Indication: Indicates the status of the headset.

USB Charge & Update Port: Port for charging and firmware updates.

QuickSwitch Button: Press for 1 second to switch between 2.4GHz Wireless and Bluetooth modes.

Bluetooth Multi-Function Button (MFB): See Bluetooth Pairing setup.

Master Volume: Controls the main volume of the headset.

Game/Chat Mix, Variable Mic-Monitoring: This controls the Game/Chat Mix on the Xbox version only. On PlayStation and PC versions, it controls Variable Mic-Monitoring.

Unmute/Mute Mic: Flip the microphone down to unmute (activation) and flip it up to mute (deactivation).

The TURTLE BEACH STEALTH 500 HWAA0005 will automatically enter Bluetooth pairing mode when powered on. If no Bluetooth connection is made within two minutes, pairing mode will stop.

To manually enable Bluetooth pairing mode:

Step 1. Press and hold the Bluetooth multi-function button (MFB) until the “Pairing Bluetooth” voice prompt plays.

Step 2. After placing your headset in pairing mode, select the headset from within your device’s Bluetooth settings menu to connect.

The Bluetooth MFB is used to answer and end calls, as well as control media playback when connected to a compatible mobile phone.

When the headset is connected using the USB wireless transmitter in the default 2.4GHz Wireless mode, incoming calls can be answered by a single press of the Bluetooth MFB. The headset will automatically switch back to 2.4GHz Wireless mode when the call is ended by a single press of the Bluetooth MFB again.

The QuickSwitch button allows you to quickly switch between low-latency 2.4GHz Wireless and Bluetooth modes based on your preference. Use Bluetooth mode to make calls, listen to music, or connect to other compatible Bluetooth devices. We recommend using the 2.4GHz Wireless mode for the best performance when gaming on consoles or PC.

Note: Select advanced audio features available in 2.4GHz Wireless mode may not be supported in Bluetooth mode.

• Do not disassemble, impact, squeeze or throw into fire;

• Do not continue to use if severe swelling;

• Do not place in a high temperature environment;

• Do not use after the battery is flooded;

• Do not use any charger other than that specifically provided for use with the equipment;

• Dispose of used batteries according to the instructions.

If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Warning: To prevent possible hearing damage, do not listen at high volume levels for long periods.