TURTLE BEACH STEALTH 500 HWBB0005 (01) PDF Document

Download the Swarm™ II mobile app for Android or iOS to update your TURTLE BEACH STEALTH 500 HWBB0005 headset to the latest firmware and customize settings.

Alternatively, you can use the Swarm™ II desktop software for Windows.

The package for the TURTLE BEACH STEALTH 500 HWBB0005 includes the following items:

• Stealth™ 500 Gaming Headset

• USB Wireless Transmitter

• Charging Cable (USB-A to USB-C)

Please follow these steps to set up your TURTLE BEACH STEALTH 500 HWBB0005 for an Xbox (Xbox version only):

1. Connect the wireless transmitter to the USB port on your Xbox.

2. Power on the headset.

3. Wait for the headset and wireless transmitter to pair.

Please follow these steps to set up your TURTLE BEACH STEALTH 500 HWBB0005 for a PlayStation, PC, or Nintendo Switch (PlayStation and PC versions only):

1. Connect the wireless transmitter to the USB port on your PlayStation, PC, or Nintendo Switch.

2. Power on the headset.

3. Wait for the headset and wireless transmitter to pair.

The controls for the TURTLE BEACH STEALTH 500 HWBB0005 are as follows:

• EQ Mode Button: Cycles through equalization presets.

• Power Button: Press and hold for 2 seconds to power on/off. A single press (1s) toggles Superhuman Hearing on/off.

• LED Status Indication: Displays the current status of the headset.

• USB Charge & Update Port: Used for charging the headset and for firmware updates.

• QuickSwitch Button: A single press (1s) switches between 2.4GHz Wireless and Bluetooth modes.

• Bluetooth Multi-Function Button (MFB): Used for Bluetooth pairing setup.

• Master Volume: Adjusts the main volume.

• Game / Chat Mix: Provides variable mic-monitoring on Xbox version only. On PlayStation and PC versions, this feature is also for variable mic-monitoring.

• Unmute: Flip the microphone down to unmute. Flip it up to mute.

Your TURTLE BEACH STEALTH 500 HWBB0005 will enter Bluetooth pairing mode when powered on. If no Bluetooth connection is made within two minutes, pairing mode will stop.

To enable Bluetooth pairing mode manually:

1. Press and hold the Bluetooth multi-function button (MFB) until the “Pairing Bluetooth” voice prompt plays.

2. After placing your headset in pairing mode, select the headset from within your device’s Bluetooth settings menu to connect.

3. The Bluetooth MFB is used to answer and end calls as well as control media playback when connected to a compatible mobile phone.

The QuickSwitch button on the TURTLE BEACH STEALTH 500 HWBB0005 allows you to quickly switch between low-latency 2.4GHz Wireless and Bluetooth modes based on your preference. Use Bluetooth mode to make calls, listen to music or connect to other compatible Bluetooth devices. It is recommended to use the 2.4GHz Wireless mode for best performance when gaming on consoles or PC.

Note: Select advanced audio features available in 2.4GHz Wireless mode may not be supported in Bluetooth mode.

When the TURTLE BEACH STEALTH 500 HWBB0005 headset is connected using the USB wireless transmitter in the default 2.4GHz Wireless mode, incoming calls can be answered by single pressing the Bluetooth MFB. The headset will automatically switch back to 2.4GHz Wireless mode when the call is ended by single pressing the Bluetooth MFB again.

Please observe the following battery cautions for your TURTLE BEACH STEALTH 500 HWBB0005:

• Do not disassemble, impact, squeeze or throw into fire;

• Do not continue to use if severe swelling;

• Do not place in a high temperature environment;

• Do not use after the battery is flooded;

• Do not use any charger other than that specifically provided for use with the equipment;

• Dispose of used batteries according to the instructions.