TP-LINK TAPO TC70 (01) PDF Document

The TP-LINK TAPO TC70 offers several smart functions to help you monitor your home:

Smooth Pan and Tilt: 360 degree horizontal range and 114 degree vertical range.

1080p High-Definition: Captures detail in crystal-clear Full HD definition.

Advanced Night View: Provides a visual distance of up to 30 feet even at night.

Live View: Allows you to stay connected from anywhere at any time.

Two-Way Audio: Communicate through the built-in microphone and speaker.

Sound and Light Alarm: Trigger effects to frighten away unwanted visitors.

Privacy Mode: Shut down surveillance to protect your privacy.

Sharing: Share memorable moments with family and friends.

Safe Storage: Store up to 128 GB on a microSD card, equal to 384 hours (16 days) of footage.

The system LED on the TP-LINK TAPO TC70 changes color based on its status:

To access these components on the TP-LINK TAPO TC70, tilt your camera lens upward. This will reveal the RESET button and the microSD card slot located underneath the lens area.

Tilt the lens of the TP-LINK TAPO TC70 up to find the RESET button. Press and hold the button for at least 5 seconds until the LED blinks red to reset your camera.

Tilt the lens up to find the slot. Holding the card in the correct orientation, carefully insert the SD card into the slot of the TP-LINK TAPO TC70. Push the card in until you hear a clicking sound. Do not insert at an angle or use excessive force. You must then initialize the card in the Tapo app for local recording.

Step 1 is to download the Tapo app from the App Store or Google Play, or by scanning the provided QR code in the documentation for the TP-LINK TAPO TC70.

Open the Tapo app and log in with your TP-Link ID. If you do not have an account, create one first. Then, tap the + button in the app and select the TP-LINK TAPO TC70 model from the list to begin the addition process.

Follow the instructions provided within the Tapo app to configure your TP-LINK TAPO TC70 and add it to your home network. Ensure your phone or tablet remains close to the camera throughout the setup process.

The TP-LINK TAPO TC70 can be placed on a flat surface or installed on a wall or ceiling using the provided mounting template and screws. You must affix the camera base using screws before securing the camera itself.

1. Mark Position: Place the mounting template where you want the TP-LINK TAPO TC70. For wall mounting, drill two holes through the two circles indicated on the template.

2. Mount Base: Affix the camera base using the screws. For wall mounting, insert two anchors into the holes first and then use the screws to affix the base over the anchors.

3. Secure Camera: Attach the TP-LINK TAPO TC70 to the base and rotate it to secure it in place.

The TP-LINK TAPO TC70 may use one of the following two types of screws (dimensions in mm):

Amazon Frustration-Free Setup (FFS) allows you to connect and set up the TP-LINK TAPO TC70 in fewer steps without needing to remember and re-enter your Wi-Fi password for each device.

To use this feature with the TP-LINK TAPO TC70, confirm the following:

The TP-LINK TAPO TC70 supports Amazon FFS.

You have an Amazon FFS enabled Alexa device or router.

You have saved your Wi-Fi information to Amazon using an Alexa echo.

The TP-LINK TAPO TC70 and router are on the same network as your Alexa echo.

During the Amazon FFS process, the TP-LINK TAPO TC70 LED will show these statuses:

If the LED does not turn solid green after a long time, try to add the TP-LINK TAPO TC70 manually. Press the Reset button on the camera once, open the Tapo app, tap the + button, select your model, and follow the app instructions.

1. Open the Amazon Alexa app, tap More, and select Skills and Games.

2. Enter Tapo in the search bar and choose Tapo.

3. Tap the ENABLE TO USE button.

4. Log in with the TP-Link ID bound to your TP-LINK TAPO TC70 and tap Authorize. A message will confirm the accounts are successfully linked.

5. Plug in the TP-LINK TAPO TC70; setup will complete automatically in two minutes.

On the Home Page of the Tapo app, you will see the TP-LINK TAPO TC70 listed. Tap on the camera or navigate to Camera Preview and then Manage to enter the Live View page.

The Live View page for the TP-LINK TAPO TC70 includes the following controls:

Talk or Voice Call: Communicate with others.

Pan and Tilt: Rotate the camera to monitor different angles.

Privacy Mode: Temporarily shut down surveillance.

Alarm: Turn on notifications for motion detection.

Playback and Memory: Check saved recordings and moments.

Multi-Screen: View live videos from multiple cameras simultaneously.

Camera Settings: Access detailed device settings.

Screenshot, Record, Volume, and Full Screen buttons.

On the Live View page, tap the gear icon to enter Camera Settings. From here, you can change the TP-LINK TAPO TC70 name, customize detection settings, set recording schedules, toggle notifications, and set activity zones.

In the Me tab of the Tapo app, you can manage your TP-LINK TAPO TC70 with these options:

Account Info: Change your avatar, edit your name, or modify your password.

Camera Memory: View photos and videos you have captured.

Camera Preferences: Choose to display Live or Speed tags on screen.

Voice Control: Set up third-party services like Alexa to control the camera.

Device Sharing: Share the TP-LINK TAPO TC70 with family members.

On the Live View page, tap the Pan and Tilt icon to enter the control page. Use the panel to move the TP-LINK TAPO TC70.

Pan and Tilt Settings: Tap the settings icon to adjust how many degrees the camera moves per tap.

Vertical Cruise: The camera moves up and down persistently.

Horizontal Cruise: The camera moves from left to right persistently.

Mark Position: Tap to mark your current view, allowing you to rotate the camera back to that spot with one tap later.

1. Go to the Camera Settings page for the TP-LINK TAPO TC70 and tap Detection and Alerts.

2. Enable the Motion Detection function. It is also recommended to enable Notifications to receive alerts on your mobile device.

In the Detection and Alerts menu, tap Camera Alarm. You can toggle the Alarm on or off, choose the Alarm Type (Sound or Light), select the Alarm Sound (Siren or Tone), and set an Alarm Schedule (All Day or Custom Schedule) for the TP-LINK TAPO TC70.

In Detection and Alerts, select Activity Zones. By default, the entire view is covered. You can customize zones so the TP-LINK TAPO TC70 only detects motion in those specific areas. Use the Add Zone, Clear All, or Landscape Mode options to refine the detection area.

In the Detection and Alerts settings for the TP-LINK TAPO TC70, you can adjust Motion Sensitivity to Low, Normal, or High. Increased sensitivity results in more recordings and notifications.

After editing detection settings, navigate to Recording Schedule in the TP-LINK TAPO TC70 settings. You can select specific times and days for motion detection recording. On the schedule grid, orange indicates Motion Detection recording.

On the Live View page, tap Playback and Memory. In the Playback section, motion detection recordings are displayed as orange sections on the timeline. A microSD card is required to use this feature on the TP-LINK TAPO TC70.

1. Ensure a microSD card is initialized in the TP-LINK TAPO TC70.

2. Enter Camera Settings from the Live View page.

3. Toggle on the microSD Recording function.

4. Tap Recording Schedule and set it for Continuous Recording. On the schedule grid, blue indicates Continuous Recording.

When viewing recordings for the TP-LINK TAPO TC70, blue sections on the playback timeline represent continuous 24-hour recording, while orange sections represent recordings triggered by motion detection.

On the Live View page, tap the Privacy Mode icon. When this mode is enabled on the TP-LINK TAPO TC70, streaming and recording functions are temporarily disabled to protect your privacy.

The TP-LINK TAPO TC70 operates in the frequency range of 2412MHz to 2472MHz with a maximum transmitted power of 20dBm.

The TP-LINK TAPO TC70 meets EU requirements on the limitation of exposure to electromagnetic fields. The device should be used at a minimum distance of 20 cm from your body.

Keep the TP-LINK TAPO TC70 away from water, fire, humidity, or hot environments.

Do not attempt to disassemble, repair, or modify the device.

Do not use a damaged charger or USB cable.

Only use power supplies provided by the manufacturer in the original packing.

Do not use the device where wireless devices are not allowed.

The adapter should be installed near the equipment and easily accessible.

Operating Temperature: 0 degrees Celsius to 40 degrees Celsius (32 degrees Fahrenheit to 104 degrees Fahrenheit).

Storage Temperature: -40 degrees Celsius to 70 degrees Celsius (-40 degrees Fahrenheit to 158 degrees Fahrenheit).

The TP-LINK TAPO TC70 label includes the following symbols:

DC voltage symbol.

Indoor use only symbol.

RECYCLING (WEEE) symbol: Indicates the product must be handled according to European directive 2012/19/EU for recycling or dismantling to minimize environmental impact.

Unplug the power cord before cleaning the TP-LINK TAPO TC70. Do not use liquid cleaners, spray cleaners, or wet cloths. Use a dry cloth for cleaning.

No, the TP-LINK TAPO TC70 is restricted to indoor use only, as indicated by its technical specifications and product labeling.

Ensure that the slots and openings on the TP-LINK TAPO TC70 are not blocked or covered, as they are provided for ventilation to ensure reliable operation and prevent overheating. Do not place the camera in a closed location unless proper ventilation is provided.

No, the microSD card is not included in the TP-LINK TAPO TC70 package and must be purchased separately.

Once you have used the Mark Position feature in the Pan and Tilt Control menu, you can quickly rotate the TP-LINK TAPO TC70 back to that specific direction by simply tapping the saved mark in the app.

The TP-LINK TAPO TC70 can provide clear visual distance of up to 30 feet in dark conditions.

The speaker on the TP-LINK TAPO TC70 is where the sound comes out of the camera, used for two-way audio communication and for the sound alarm features.

Connect the provided power cord to the DC Power Port located on the base of the TP-LINK TAPO TC70 and plug it into a standard power outlet.

The safety instructions state that you should not use a damaged charger or USB cable, and you should only use power supplies provided by the manufacturer in the original packaging for the TP-LINK TAPO TC70.

The Auto Reboot feature can be found in the Camera Settings of the TP-LINK TAPO TC70. It allows the camera to restart itself based on a schedule or manual trigger to maintain optimal performance.

The Privacy Mask feature allows you to block out certain areas of the camera’s view from being recorded or streamed by the TP-LINK TAPO TC70 to maintain privacy in specific zones.

The microphone is built-in to the TP-LINK TAPO TC70. Ensure you do not insert any objects into the microphone hole to avoid damage. It is activated when using the Talk or Voice Call functions in the app.

Based on the operating frequency of 2412MHz to 2472MHz mentioned in the documentation, the TP-LINK TAPO TC70 operates on 2.4GHz Wi-Fi bands.

Navigate to the Me tab in the Tapo app and select Device Sharing. From there, you can invite family members to manage and view the TP-LINK TAPO TC70 together.

In the Camera Preferences section under the Me tab, you can choose to display a Speed Tag on the screen for the TP-LINK TAPO TC70, which shows real-time network speeds during Live View.

Yes, in the Camera Settings menu for the TP-LINK TAPO TC70, there is a toggle switch for the LED that allows you to turn it on or off as needed.

Technical support and troubleshooting information for the TP-LINK TAPO TC70 can be found through the Help and Feedback section in the Me tab of the Tapo app.

The documentation for the TP-LINK TAPO TC70 notes that a setup video is available through the official TP-Link support website under the cloud cameras category.

Ignoring the type of note indicated with a bookmark icon in the guide might result in a malfunction or damage to the TP-LINK TAPO TC70 device.

Yes, the TP-LINK TAPO TC70 features a Sound and Light Alarm that can be triggered when motion is detected to frighten away unwanted visitors.

Yes, once the Tapo skill is enabled and linked in the Amazon Alexa app, you can use voice commands such as “Alexa, show my baby room camera” to access the TP-LINK TAPO TC70.