TP-LINK TAPO T110 (01) PDF DOCUMENT

The TP-LINK TAPO T110 Smart Contact Sensor allows you to know when doors or windows are opened or closed, making your home safer and smarter. Its features include:

Window/Door Safeguard: Monitors the opening & closing of windows, doors, cabinets, the fridge, or the mailbox in real time.

Instant App Notification: Find out immediately with instant notifications.

Smart Action Support: Connect the actions with other smart devices for a welcome return home.

Easy Installation: Mount to nearly any surface with included 3M adhesive.

Great Compatibility: Part of the integrated Tapo ecosystem.

Battery Powered: Battery-powered design with 1+ year battery life (based on the testing of 30 triggers a day).

Device Sharing: Easily share management permissions with each member of your family.

Easy Setup and Use: Set up quickly and easily through the free Tapo app.

The TP-LINK TAPO T110 consists of two main parts: the Sensor and the Magnet.

The Sensor part includes:

• Magnet Alignment Mark

• LED Light

• Reset Button (inside)

• Battery Compartment (inside)

You can create Smart Actions to automate your smart devices. Examples include:

Light the Way When Arriving Home: By pairing the TP-LINK TAPO T110 with Tapo Lighting, you can have the light turn on automatically when you open the door.

Build Smart Alarm / Secure Door/Window: By pairing the TP-LINK TAPO T110 with a Tapo Hub, you can trigger the hub alarm and send app notifications when someone opens a door or window. The Hub will ring if the door/window is opened.

Before you start, a Tapo Hub is required. Ensure your Tapo Hub is successfully added via the Tapo app.

1. Set Up Your Sensor

Tap the ‘+’ button in the Tapo app, tap Sensors, and select your model (Tapo T110). Follow the instructions in the Tapo app to complete the setup.

2. Check the LED & Set Up

Check if the LED blinks. If not, use a pin to press and hold the Reset button for 5 seconds. If you are setting up the device for the first time, remove the battery insulation tab first. Follow the app instructions to complete the setup.

3. Test Your Sensor

Open and close the sensor to test it in your preferred location. Check the Event Log on the Tapo app to confirm the open/closed status.

1. Stick the included adhesives on the sensor and magnet.

2. Choose where you’d like to install the sensor (but don’t attach it yet). Place the magnet near the edge of the door or window that moves.

3. Align the magnet and sensor with no more than 0.59 inches (15 mm) between them when the door or window is closed. Use the alignment lines on the sensor and magnet to help.

4. Peel the backing from the adhesive and press the sensor and magnet into place.

Notes:

• Leave at least 0.39 inches (10 mm) of space so you can open the battery compartment.

• Installation height should not be higher than 6.56 ft (2 m).

After successfully setting up your hub and sensor, you will see your devices listed on the home page. With the Tapo app, you can view and manage your devices and get instant notifications anytime, anywhere.

Home Page

This page lists all the devices you’ve added. You can view them directly and manage them easily. Tap the card for your TP-LINK TAPO T110 to enter its Status page.

Home Page Settings

Long press on a device card to reorder cards, remove a device, share your device, favorite/unfavorite it, or relocate it to another Home.

Status Page

On this page, you can check all events of your sensor. Slide the panel up to check more settings or tap the gear icon to enter the Settings page.

From the sensor’s Status page, tap the gear icon to enter the Device Settings page. Here you can:

• Check/edit the basic info (like Device Name and Location).

• Set Notifications settings.

• View User Manual and Placement Guide.

• Remove your device from your account.

Notifications Settings

Turn on Notifications if you want to receive app notifications when your sensor detects an event. You can set the time you want to be notified (Always, During the Day, During the Night, or a Custom Time).

The sensor can work with other Tapo devices to automate your home. You can customize smart actions based on templates. The available templates are:

1. On the Status page for your sensor, tap Explore Smart Actions.

2. Choose a template (e.g., “Build a smart alarm when you sleep”) and customize the smart action based on the template.

3. Select the devices you want to take action (e.g., your Tapo Hub) when the sensor detects an event.

4. Customize the settings as needed. The “When” trigger will be your Contact Sensor opening. You can add “Then” actions. Turn on Delay Action if you want the action to take place some time after the sensor detects an event.

5. Set the effective time for this smart action. You can choose Always, a custom time, or repeat on specific days.

Once done, you can go to Smart (Smart Actions) > Automation to check the item. You can toggle it on/off, tap to edit, or swipe right to delete.

If you haven’t installed it on a door or window:

Slide to remove the cover.

If you have installed it on a door or window:

Remove the cover of your sensor by pushing the cover up.

After removing the cover:

Remove the screw securing the battery and remove the old battery. Insert the new CR2032 battery into the battery compartment, making sure the battery is level and its positive side is facing up. Then replace the cover.

You can reset the sensor using one of two methods:

Option 1: Via Reset Button

Remove the cover, then use a pin to press and hold the Reset button for 5 seconds until the front LED starts blinking.

Option 2: Via the Tapo App

Long press the sensor’s card on the home page and tap the remove icon, OR go to the Device Settings page for the sensor and tap the REMOVE button to remove your sensor from your account.

General Safety:

• Keep the device away from water, fire, humidity or hot environments.

• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.

• Do not use the device where wireless devices are not allowed.

• Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Battery Safety and Warnings:

• CAUTION: Do not ingest battery. Chemical Burn Hazard. This product contains a coin / button cell battery. If swallowed, it can cause severe internal burns in just 2 hours and can lead to death.

• Keep new and used batteries away from children.

• If the battery compartment does not close securely, stop using the product and keep it away from children.

• If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

• Avoid replacement of a battery with an incorrect type that can defeat a safeguard.

• Avoid disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.

• Do not leave a battery in an extremely high temperature surrounding environment or subjected to extremely low air pressure that may result in an explosion or leakage.

• Do not let leaked electrolyte come into contact with eyes or skin. Immediately wash the area of contact with clean water and seek help from a doctor.

• Do not put the battery into a fire, submerge it in water, or get it wet.

• Do not connect the battery reversed in positive (+) and negative (-) terminals.

• Do not let battery terminals (+ and -) contact metal objects like a necklace or hairpin.

• Do not connect the battery directly to an electric outlet or cigarette lighter socket in a car.

• Do not throw, drop, drive a nail in, hit with a hammer, or stamp on the battery.

• Do not solder the battery directly or disassemble it.

• Do not put the battery in a microwave or pressure cooker.

• Do not use with other makers’ batteries, different types, or new and old batteries together.

Operating Conditions:

• Operating Temperature: 0°C – 40°C (32°F – 104°F)

• Operating Humidity: 10% – 90%RH, Non-condensing

Storage Conditions:

• When the battery is charged: 0°C ~ +45°C (Humidity < 80%)

• When stored 1 month: -20°C ~ +50°C (Humidity < 80%)

• When stored 3 months: -20°C ~ +45°C (Humidity < 80%)

• When stored 1 year: -20°C ~ +20°C (Humidity < 80%)