TOTALLY WICKED ARC 4 (01) PDF Document

The TOTALLY WICKED ARC 4 uses a 5-click on/off function. To switch the device on, quickly press the power button 5 times. The screen will illuminate, indicating that the device is powered on. Once the TOTALLY WICKED ARC 4 is powered on, press the button 5 times to switch the device off.

To fill the tank, follow these steps:

1. Remove the CS Air 2 Tank from the TOTALLY WICKED ARC 4 battery by unscrewing at the atomizer base.

2. Invert the tank, unscrew and remove the atomizer base.

3. Refill the tank through one of the apertures either side of the central air tube. Do not place liquid in the central tube.

4. Refit the atomizer base and screw the assembled tank back onto the arc battery.

Note: The maximum refill nozzle diameter is 2.8mm.

To vape, simply press the power button as you inhale.

Use the up or down adjustment buttons to increase or decrease the level of wattage respectively. The available wattage range is 1W – 40W.

Using a suitable screwdriver, airflow can be decreased or increased by turning the screw clockwise or anticlockwise respectively.

Charge the TOTALLY WICKED ARC 4 via the USB cable when connected to a powered USB port or suitable wall adapter. The indicator on the display will indicate the battery status.

To replace the atomizer head:

1. Remove the CS Air 2 Tank from the arc battery by unscrewing at the atomizer base.

2. Invert the tank and unscrew the atomizer base from the tank tube.

3. Unscrew the CS atomizer head from the atomizer base and replace.

4. Reassemble the tank and screw the assembled tank back onto the arc battery.

To display the puff counter, quickly press the power button 4 times. The puff counter is displayed on the first row, and the puff duration counter is displayed on the second row.

To reset the number of puffs recorded to zero, hold the power button and up adjustment button whilst the puff counter display is active.

To reset the puff duration to zero, hold the power button and down adjustment button whilst the puff duration counter display is active.

Quickly press the button 4 times to return to the wattage display.

When powered on, simultaneously hold the power button and the down adjustment button to activate stealth mode. Repeat the process to deactivate stealth mode.

When powered on, simultaneously hold the two adjustment buttons for 3 seconds to activate key lock mode. Repeat the process to deactivate key lock mode.

When powered off, hold both adjustment buttons to turn the display orientation upside down.

If a short circuit occurs, ‘Atomizer Short’ will be displayed on the screen and the device will not fire.

If no atomizer is detected, ‘No Atomizer’ will be displayed on the screen.

Replace the atomizer head to continue.

If the power button is pressed for longer than 10 seconds, the output will automatically cease and the message ‘Over 10s’ will be displayed.

When the battery voltage is below 3.3V, ‘Lock’ will be displayed on the screen. Recharge the battery to unlock the device and begin vaping again.

When the battery reaches lower than 10% capacity, the power symbol on the screen will flash continuously.

If the temperature of the device exceeds the maximum safe operating temperature, ‘Device Too Hot’ will be displayed on the screen and the output will shut off automatically. Allow to cool before use.

1 x arc 4 Body

1 x CS Air 2 Tank

1 x CS atomizer head (1.5ohm fitted)

1 x USB cable

1 x User manual

Store the arc 4 e-cigarette and its accessories away from children whilst not in use.

Please only use the charging cable provided.

Please dispose of dead batteries in accordance with your country’s appropriate legislation.

Do not charge the battery in a damp environment, or in temperatures under 0°C or above 45°C.

Do not use the device in temperatures under -10°C or above 60°C.

Do not carry batteries in a pocket or bag with other metallic objects.

Do not attempt to repair a faulty arc 4 battery as these are sealed units with no serviceable parts. Attempted repairs will void the warranty.