Free English SUPERMICRO SUPERSERVER SYS-512AR-N4T (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD SUPERMICRO SUPERSERVER SYS-512AR-N4T (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How can I find the default BMC password for my SUPERMICRO SUPERSERVER SYS-512AR-N4T?
Each SUPERMICRO SUPERSERVER SYS-512AR-N4T system comes with a unique default password for the ADMIN user. This password can be found on a sticker located on the motherboard and on another sticker on the chassis service tag. If necessary, the password can be reset.
What are the functions of the buttons and LEDs on the control panel of the SUPERMICRO SUPERSERVER SYS-512AR-N4T?
The control panel of the SUPERMICRO SUPERSERVER SYS-512AR-N4T features the following buttons and LEDs:
Power Button: Used to turn the system on and off.
Reset Button: Used to reboot the system.
Power LED: Indicates the system’s power status.
Drive Activity LED: Shows activity from the internal hard drives.
NIC (LAN1) LED: Indicates network activity on LAN port 1.
NIC (LAN2) LED: Indicates network activity on LAN port 2.
Information LED: Provides system status information through various colors and blinking patterns.
What do the different colors and statuses of the Information LED on the SUPERMICRO SUPERSERVER SYS-512AR-N4T indicate?
| Color, Status | Description |
|---|---|
| Red, solid | An overheating condition has occurred |
| Red, blinking at 1 Hz | Fan failure, check for an inoperative fan |
| Red, blinking at 0.25 Hz | Power failure, check for a non-operational power supply |
| Red, blinking at 10 Hz | CPLD recovery mode error |
| Blue, solid | Unit ID has been activated by button |
| Blue, blinking at 1 Hz | Unit ID has been activated using the BMC |
| Blue, blinking at 2 Hz, and BMC Heartbeat LED on the motherboard is green | BMC is resetting |
| Blue, blinking at 4 Hz | BMC is setting factory defaults |
| Blue, blinking at 10 Hz | BIOS/BMC is recovering or updating |
What I/O ports are available on the rear panel of the SUPERMICRO SUPERSERVER SYS-512AR-N4T?
The rear I/O panel of the SUPERMICRO SUPERSERVER SYS-512AR-N4T includes the following ports:
• IPMI LAN Port
• DisplayPorts
• HDMI Ports
• USB Ports
• RJ45 2.5 GBe Ports
• RJ45 10 GBe LAN Ports
What type of CPU and memory does the SUPERMICRO SUPERSERVER SYS-512AR-N4T support?
Based on the motherboard block diagram, the SUPERMICRO SUPERSERVER SYS-512AR-N4T supports:
CPU: An Intel CPU compatible with the LGA1851 socket.
Memory: DDR5 memory, supporting both ECC and Non-ECC modules, with speeds including 5600 MHz.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD SUPERMICRO SUPERSERVER SYS-512AR-N4T (01) PDF DOCUMENT