Free English SUPERMICRO SUPERSERVER SYS-322GA-NR (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD SUPERMICRO SUPERSERVER SYS-322GA-NR (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What are the top system features of the SUPERMICRO SUPERSERVER SYS-322GA-NR?
| Feature | Description |
|---|---|
| DIMM Slots | 24 DIMMs supporting up to 6 TB 6400 MT/s DDR5 RDIMM or 6 TB 8800 MT/s DDR5 MRDIMM |
| Drive Bays | 6/14 hot-swap E1.S NVMe drive bays or 2/4/6 hot-swap 2.5″ NVMe drive bays |
| Processor | Dual Intel Xeon 6900-series Processors with P-cores up to 500 W |
| PCIe Slots | Up to 10 PCIe 5.0 x16 FHFL or 20 PCIe 5.0 x8 FHFL slots |
| Power Supplies | 3x 3200 W or 2700 W Redundant (2+1) Titanium Level power supplies |
What are the front slot configurations on the SUPERMICRO SUPERSERVER SYS-322GA-NR?
| Section | Slot Description | Notes |
|---|---|---|
| 18, 19 | One PCIe GEN5 x16 (FHFL), or two PCIe x8 (FHFL), or two U.2 (2.5″) slots, or six E.1S (15mm) slots | Only one configuration per section |
| 20, 21 | One PCIe GEN5 x16 (FHFL), or two PCIe x8 (FHFL), or two U.2 (2.5″) slots, or six E.1S (15mm) slots | Only one configuration per section |
| 0, 1, 2, 3, 4, 5 | One PCIe GEN5 x16 (FHFL), or two PCIe x8 (FHFL) | Only one configuration per section |
How do I interpret the Information LED status on the SUPERMICRO SUPERSERVER SYS-322GA-NR?
| Color, Status | Description |
|---|---|
| Red, solid | An overheating condition has occurred |
| Red, blinking at 1 Hz | Fan failure, check for an inoperative fan |
| Red, blinking at 0.25 Hz | Power failure, check for a non-operational power supply |
| Red, blinking at 10 Hz | CPLD recovery mode error |
| Blue, solid | Unit ID has been activated by button |
| Blue, blinking at 1 Hz | Unit ID has been activated using the BMC |
| Blue, blinking at 2 Hz, and BMC Heartbeat LED on the motherboard is green | BMC is resetting |
| Blue, blinking at 4 Hz | BMC is setting factory defaults |
| Blue, blinking at 10 Hz | BIOS/BMC is recovering or updating |
What is the function of the UID Button/BMC Button on the SUPERMICRO SUPERSERVER SYS-322GA-NR?
The unit identification (UID) button turns on or off the blue light function of the Information LED. This button can also be used to reset the BMC.
Where can I find the default BMC password for the SUPERMICRO SUPERSERVER SYS-322GA-NR?
Each SUPERMICRO SUPERSERVER SYS-322GA-NR comes with a unique default password for the ADMIN user. This can be found on a sticker on the motherboard and another on the chassis service tag. If necessary, the password can be reset.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD SUPERMICRO SUPERSERVER SYS-322GA-NR (01) PDF DOCUMENT