Free English NUX NOD-3 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD NUX NOD-3 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What are the features of the NUX NOD-3 Morning Star Overdrive pedal?
The NUX NOD-3 features include:
• Warm overdrive circuit with switchable “Shine” circuit (Hold the foot-switch for 1.5 seconds to activate)
• True Bypass / Buffer Bypass (Optional)
• Drive, Level and Tone controls
• USB input for firmware updates
What are the power requirements for the NUX NOD-3?
The NUX NOD-3 Morning Star requires a 9V DC power supply with a centre negative plug and a current draw of 90mA. It is recommended to use a power supply with identical specifications.
How do I use the controls on the NUX NOD-3?
DRIVE knob: Controls the amount of overdrive you get.
LEVEL knob: Controls the volume of the signal.
TONE knob: Boosts highs and cuts lows when you turn it clockwise.
ON/OFF switch: Used to turn the pedal on or off, and to activate the shine mode.
How do I connect the NUX NOD-3 to my guitar and amplifier?
INPUT: Connect your input signal (from your guitar or another pedal) to the input jack.
OUTPUT: Use the output jack to connect into other pedals or the amplifier.
What do the LEDs on the NUX NOD-3 indicate?
BYPASS LED: This LED lights up while the pedal is engaged.
SHINE LED: This LED lights up while the SHINE MODE is engaged.
What is the “Shine” circuit on the NUX NOD-3 and how do I activate it?
The “Shine” circuit is an additional circuit that increases your high frequency level to get a new horizon of tone brightness. To activate it, hold the foot-switch for 1.5 seconds.
What bypass options does the NUX NOD-3 offer?
The NUX NOD-3 offers two bypass options: True Bypass or Buffer Bypass for your signal chain needs.
Can you provide some classic settings for the NUX NOD-3?
The following are some dynamic parameter settings for the NUX NOD-3. Note that your guitar is the main signal source, so parameters can sound different on different guitars and pick-up arrangements.
| Setting Name | Description | Drive | Level | Tone | Shine |
|---|---|---|---|---|---|
| A Mellow Country | Soft dirty-clean sound good for rhythm playing | 4 | 4~9 | 5 | OFF |
| Born to be Wild | Natural bright warm overdrive | 8 | 8 | 6 | OFF |
| Banjo Rollin’ over Guitar | Low-drive sound as bright as Venus | 3 | 6 | 6 | ON |
| Hit-the-Road Hack | Shiny and rich harmonics | 8 | 7 | 3 | ON |
| Shocking Blue Venus | A modern rock with vintage touch | 7 | 6 | 5 | ON |
What are the technical specifications for the NUX NOD-3 Morning Star?
• Input impedance: 1MΩ
• Output impedance: 1KΩ
• Power Supply: 9V center negative DC supply, 90mA current draw
• Dimensions: 94mm(L) x 51mm(W) x 53mm(H) / 3.7(L) x 2.0(W) x 2.08(H)inches
• Weight: 174 g / 6 oz
What accessories are included with the NUX NOD-3?
The NUX NOD-3 comes with an Owner’s manual and a Warranty card.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD NUX NOD-3 (01) PDF DOCUMENT