SONY BRAVIA KDL-32BX320 (04) PDF Document

When cleaning, be sure to unplug the power cord to avoid any chance of electric shock.

Step 1. Wipe the LCD screen gently with a soft cloth.

Step 2. Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap and warm water.

Step 3. If using a chemically pretreated cloth, follow the instructions provided on the package.

Step 4. Never use strong solvents such as a thinner, alcohol or benzine for cleaning.

When moving or setting up the SONY BRAVIA KDL-32BX320, consider the following:

Step 1. Disconnect all cables when carrying the TV.

Step 2. Carry the TV with the adequate number of people.

Step 3. Maintain correct hand placement while carrying the TV to avoid damage.

Sudden room temperature changes may cause moisture condensation, which may cause the TV to show poor picture or poor color. Should this occur, allow moisture to evaporate completely before powering on the SONY BRAVIA KDL-32BX320.

Insert two size AA batteries by matching the plus and minus symbols on the batteries to the diagram inside the battery compartment of the remote control.

Follow these guidelines to ensure proper operation:

Step 1. Point your remote control directly at the IR sensor located on the SONY BRAVIA KDL-32BX320.

Step 2. Make sure that no objects are blocking the path between the remote control and the IR sensor.

Step 3. Fluorescent lamps can interfere with the remote control. If you have trouble, try turning off the fluorescent lamps.

To reset the SONY BRAVIA KDL-32BX320 to factory default settings:

Step 1. Turn on the TV.

Step 2. Press and hold down the up arrow button on the remote, then press the power button on the TV set. The TV will turn itself off, then back on again.

Step 3. Release the up arrow button when the TV is on.

Note: This will clear all of your customized settings including the Parental Lock setting.

If you lose or cannot remember your password, enter the master password: 4357. This password clears your previous password and allows you to enter a new one.

The equipment control buttons are used to control compatible equipment connected to the SONY BRAVIA KDL-32BX320 via the Control for HDMI function. Use these buttons to play, pause, rewind, fast forward, stop, go to previous, or go to next on the connected equipment.

Press the SCENE button on your remote control to optimize picture and sound quality. Available options include Cinema, Sports, Photo, Music, Game, Graphics, General, and Auto.

Press the WIDE button on the remote control repeatedly to cycle through available settings. Alternatively, go to Settings, then Screen settings, and set Auto Wide to On to have the TV automatically adjust the screen.

Press the INPUT button on the remote control repeatedly to toggle through and select the desired external input or TV mode.

To enable BRAVIA Sync:

Step 1. Press HOME and select Settings.

Step 2. Select Setup settings.

Step 3. Select HDMI Settings.

Step 4. Highlight Control for HDMI and set it to On.

To use the Picture in Picture (PIP) feature:

Step 1. While in PC mode, press the OPTIONS button.

Step 2. Select PIP from the menu.

Step 3. The sub window will appear.

Note: You can swap audio between the main and sub windows by selecting Audio Swap in the OPTIONS menu.

While tuned to the channel or viewing the input you want to add, press HOME and select Favorites. Highlight Add to Favorites and press the center selection button.

Step 1. Connect a supported USB device to the SONY BRAVIA KDL-32BX320.

Step 2. Press HOME.

Step 3. Select Photo, Music, or Video.

Step 4. Use the arrow buttons to select the file or folder and press the center selection button to begin playback.

The SONY BRAVIA KDL-32BX320 supports the following formats:

Photo: JPEG files conforming to DCF 2.0 or Exif 2.21.

Music: MP3 files that have not been copyrighted.

Video: MPEG1 and MPEG2 files with the .mpg extension.

Step 1. Press the HOME button on the remote control to display the menu options.

Step 2. Use the arrow buttons to navigate through the menu or adjust settings.

Step 3. Press the center button to select or confirm.

Step 4. Press the HOME button again to exit.

You can adjust various settings including Picture Mode, Backlight, Picture, Brightness, Color, Hue, Color Temperature, Sharpness, Noise Reduction, MPEG Noise Reduction, and CineMotion. Advanced settings such as Adv. Contrast Enhancer, Black Corrector, Gamma, Clear White, Live Color, and White Balance are also available.

Go to the Sound settings menu to adjust Sound Mode, Treble, Bass, Equalizer, Balance, Surround, Volume Offset, Steady Sound, MTS Audio, Alternate Audio, and Speaker settings.

Step 1. Press HOME and select Settings.

Step 2. Select Channel settings.

Step 3. Select Auto Program.

Step 4. Select OK to start the scan.

Step 1. Press HOME and select Settings.

Step 2. Select Parental Lock settings.

Step 3. Enter your four-digit password. If you have not created one yet, set it up as prompted.

From this menu, you can configure Country, Rating levels, Downloadable U.S. Ratings, Unrated program blocking, Channel Block, and External Input Block.

Step 1. Press HOME and select Settings.

Step 2. Select Setup settings.

Step 3. Select Closed Captions (CC).

Here you can set CC Display, configure Analog CC, Digital CC, and customize Digital CC Options like character size, style, color, and opacity.

Step 1. Press HOME and select Settings.

Step 2. Select Setup settings.

Step 3. Select Sleep Timer.

Step 4. Choose the desired time in minutes (Off, 15, 30, 45, 60, 90, or 120).

Step 1. Press HOME and select Settings, then Setup settings.

Step 2. Select Label Video Inputs in the AV Setup menu.

Step 3. Select the input (HDMI, Video 1-2, Component, PC) you want to label.

Step 4. Choose from the list of labels or assign Skip if no equipment is connected.

Press HOME, select Settings, and then select Eco settings. From here, you can adjust Power Saving, set Idle TV Standby, enable Auto Shut Off, and control the Light Sensor.

The Power Saving setting allows you to select between Off, Low, High, or Picture Off to reduce power consumption. Selecting the High option reduces power consumption more than the other settings.

The Light Sensor on the SONY BRAVIA KDL-32BX320 senses ambient room light levels and automatically optimizes the picture settings accordingly.

Go to Settings, select Setup settings, then select Signal Diagnostics to display information for the current signal.

Press HOME, select Settings, select Setup settings, and then select Language. You can choose between English, Español, and Français.

Check the Power Saving settings, ensure the power cord is connected securely, ensure the TV is powered on, check antenna or cable connections, and verify that the Signal Type setting matches your source.

Check the volume control, ensure the Muting function is off, ensure Speakers is set to TV Speakers in the Sound settings, and check if you are using an external audio system.

Yes. Connect the PC to the TV using an HD15-HD15 cable (analog RGB) and an audio cable for sound, or use a DVI or HDMI connection. You may need to adjust the PC’s resolution and timing.

Go to Settings, select Channel settings, and then select Show/Hide Channels. Navigate to the channel you want to hide and use the selection button to change its status.

Go to Settings, select Screen settings, and configure the 4:3 Default setting to Wide Zoom, Normal, Full, Zoom, or Off.

Yes. Ensure you use the appropriate Sony Wall-Mount Bracket recommended for your specific model. Installation should be performed by a professional.

The wall-mount hole pattern for the SONY BRAVIA KDL-32BX320 is 200 x 200 mm.

Adjust the Picture Mode options in the Picture settings. Also, check if Power Saving mode is set to Low or High, as this can affect black levels.

Press the HOME button and select Favorites from the main menu.

Picture Frame allows you to display a photograph on the screen for a selected period of time, after which the SONY BRAVIA KDL-32BX320 will automatically switch to standby mode.

Go to Settings, select Channel settings, and then select Signal Type. Choose between Cable or Antenna depending on your setup.

Check the antenna or cable connections, and ensure the antenna location and direction are optimal.

Press the VOL +/- buttons on the remote control.

The SONY BRAVIA KDL-32BX320 includes inputs for Cable/Antenna, HDMI 1/2, PC IN, Component IN, and Video IN 1/2.

Yes. You can connect an external audio system to the Audio Out or Digital Audio Out (Optical) ports. Ensure you set the Speakers setting to Audio System in the Sound settings menu.

The Info Banner displays information related to the input signal, such as channel name and program title. You can set the size to Small or Large in the Setup settings.

Go to Settings, select Screen settings, and adjust the Vertical Center option.

Check if the Sleep Timer is active in the Setup settings, or if Idle TV Standby is enabled in the Eco settings.

Go to Settings, select Channel settings, and choose Label Channels. Select the channel number and use the on-screen character menu to assign a new label.

Depending on the file size, resolution, and the number of files in the folder, loading may take time. If it is the first time connecting via USB, it may take a couple of minutes.

Steady Sound, when enabled (On), helps stabilize the volume across all programs and commercials to prevent sudden changes in sound level.

Go to Settings, select Picture settings, and then select Color Temperature. You can choose from Cool, Neutral, Warm 1, or Warm 2.

Go to Settings, select Parental Lock settings, and configure the External Input Block option to prevent access to specific inputs.

Yes. You can enable or disable this in the Setup settings by selecting Start-up Sound and choosing On or Off.

The display resolution is 1,388 dots (horizontal) by 768 lines (vertical).