SONY BRAVIA KDL-22BX321 (03) PDF Document

When cleaning the SONY BRAVIA KDL-22BX321, be sure to unplug the power cord to avoid any chance of electric shock. Wipe the LCD screen gently with a soft cloth. Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap and warm water. Never use strong solvents such as a thinner, alcohol, or benzine for cleaning.

When setting up the SONY BRAVIA KDL-22BX321, ensure you disconnect all cables when carrying it. Carry the TV with an adequate number of people, as larger sizes require two or more people. Ensure the TV has adequate ventilation. Do not expose the screen to direct illumination or sunlight for the best picture quality, and avoid installing the TV in a room with reflective wall and floor materials. Do not move the TV from a cold area to a warm area to prevent moisture condensation.

The Light sensor on the SONY BRAVIA KDL-22BX321 senses the room light level and adjusts the screen brightness accordingly. Do not put anything over the sensor, as doing so may affect its function.

The SONY BRAVIA KDL-22BX321 has several LED indicators: The Picture Off/Timer LED lights up in orange when the sleep timer or Picture Frame is set, and in green when Power Saving is set to Picture Off. The Standby LED lights up in red when the TV is in standby mode. The Power LED lights up in green when the TV is turned on.

To insert batteries into the remote control for the SONY BRAVIA KDL-22BX321, push to open the battery compartment and insert two size AA batteries, matching the plus and minus signs on the batteries to the diagram inside the compartment.

Point your remote control directly at the IR sensor located on your SONY BRAVIA KDL-22BX321. Ensure no objects are blocking the path between the remote control and the IR sensor. Fluorescent lamps can interfere with your remote control, so try turning them off. If problems persist, reinsert or replace your batteries to ensure they are correctly inserted.

The SCENE button on the SONY BRAVIA KDL-22BX321 optimizes picture and sound quality by selecting from preset modes. The modes include: Cinema (for theater-like sound and picture), Sports (for realistic pictures and sound in a stadium), Photo (for printed photo texture and color), Music (for dynamic and clear sound like a concert), Game (for broad game-playing experience), Graphics (for clearer detailed pictures), General (no optimized quality), and Auto (optimizes based on the input source).

To enter PIP (picture in picture) mode on the SONY BRAVIA KDL-22BX321, press OPTIONS while in PC mode and select PIP from the menu. The sub window will appear. You can move the location of the sub window using the arrow buttons. You can change the sub window channel by pressing CH +/- or using the 0-9 numeric buttons.

To swap audio between the main and sub windows in PIP mode on the SONY BRAVIA KDL-22BX321, press OPTIONS, highlight Audio Swap, press the center button, highlight the window you want to be audible, and press the center button again.

While tuned to the channel you want to add on your SONY BRAVIA KDL-22BX321, press HOME, select Favorites to display the list, highlight Add to Favorites, and press the center button.

You can change the Wide Mode on the SONY BRAVIA KDL-22BX321 by pressing the WIDE button on the remote control repeatedly to cycle through the available modes. Alternatively, you can enable Auto Wide by going to Settings, Screen settings, and setting Auto Wide to On.

To label an input on your SONY BRAVIA KDL-22BX321, press HOME, select Settings, select the Setup settings, and choose Label Video Inputs in AV Setup. Highlight the video input you want to label, press the center button, highlight the desired label, and press the center button to confirm.

If you have an unused input on your SONY BRAVIA KDL-22BX321, you can label it as Skip. When you assign Skip, the TV will bypass this input when you press the INPUT button, and the label will be grayed out in the input list.

Connect a supported USB device to the USB port of the SONY BRAVIA KDL-22BX321. Press HOME, select Photo, Music, or Video, and press the center button. Use the arrow buttons to select the file or folder you wish to play and press the center button to start playback.

The SONY BRAVIA KDL-22BX321 supports JPEG photo file formats with the extension .jpg and conforming to DCF 2.0 or Exif 2.21.

The SONY BRAVIA KDL-22BX321 supports MP3 music files with the extension .mp3 that have not been copyrighted.

The SONY BRAVIA KDL-22BX321 supports MPEG1 and MPEG2 video files with the extension .mpg.

To access the settings menu on the SONY BRAVIA KDL-22BX321, press the HOME button on the remote control, navigate using the arrow buttons, and press the center button to select or confirm your choices.

To reset your picture settings on the SONY BRAVIA KDL-22BX321, go to the Picture settings menu and select Reset. This will restore the current picture settings to their defaults, excluding the Picture Mode.

You can adjust the sound of your SONY BRAVIA KDL-22BX321 by going to the Sound Settings menu. Here, you can change the Sound Mode, adjust Treble, Bass, Equalizer, Balance, and configure Surround sound and Steady Sound features.

To use an external audio system with your SONY BRAVIA KDL-22BX321, go to the Sound Settings menu, select Speakers, and choose Audio System. This will disable the internal TV speakers.

To set the Signal Type on the SONY BRAVIA KDL-22BX321, go to the Channel Settings menu, select Signal Type, and choose either Cable (if using a cable TV provider) or Antenna.

In the Channel Settings menu of your SONY BRAVIA KDL-22BX321, select Show/Hide Channels. Scroll through the channel list using the arrow buttons, select the channel you want to change, and use the arrow buttons to toggle it between being shown or hidden.

To create a password for Parental Lock on your SONY BRAVIA KDL-22BX321, go to the Parental Lock settings and select Enter password. Use the 0-9 keys on the remote control to enter a four-digit password. The first time you create one, you will need to confirm it by entering it again.

In the Parental Lock settings of the SONY BRAVIA KDL-22BX321, select External Input Block. This allows you to block access to specific external inputs regardless of program ratings.

To view a blocked channel on the SONY BRAVIA KDL-22BX321, tune to the blocked channel, press the center button on the remote, and then enter your Parental Lock password.

If you lose your password for the SONY BRAVIA KDL-22BX321, the master password is 4357. This will clear the previous password and allow you to set a new one in the Parental Lock settings.

To configure closed captioning on your SONY BRAVIA KDL-22BX321, go to the Setup Settings and select Closed Captions (CC). You can toggle CC Display (On, Off, or On when Muting) and configure specific Analog CC or Digital CC options.

Go to the Setup Settings menu on your SONY BRAVIA KDL-22BX321 and select Sleep Timer. You can choose the desired time in minutes (Off, 15, 30, 45, 60, 90, or 120) for the TV to remain on before automatically shutting off.

To enable BRAVIA Sync on your SONY BRAVIA KDL-22BX321, press HOME, select Settings, then select Setup. Navigate to HDMI Settings, highlight Control for HDMI, and set it to On.

To reset the SONY BRAVIA KDL-22BX321 to factory default settings, first turn on the TV. Press and hold the up arrow button on the remote, then press the power button on the TV set. The TV will turn off and then back on. Release the up arrow button when the TV is on. Note that this will clear all customized settings, including Parental Lock.

The SONY BRAVIA KDL-22BX321 offers several Power Saving modes: Off, Low, High, and Picture Off. Selecting High will reduce power consumption more than the other settings.

The Idle TV Standby feature on the SONY BRAVIA KDL-22BX321 will automatically power off the TV after 1h, 2h, or 4h if no buttons are pressed on the remote or TV.

If your SONY BRAVIA KDL-22BX321 turns off automatically, check if the Sleep Timer is activated in the Setup Settings, or check the Idle TV Standby setting in the Eco settings.

If there is no picture on the SONY BRAVIA KDL-22BX321, check your Power Saving settings, ensure the power cord is connected securely, verify the TV is turned on, check your cable/antenna connections, and ensure the Signal Type is correctly set for your TV signal source.

If there is no sound on the SONY BRAVIA KDL-22BX321, check the volume control, ensure the Muting function is not active by pressing the MUTING or VOL + button, and make sure that Speakers is set to TV Speakers in the Sound settings.

Due to the thin profile of the SONY BRAVIA KDL-22BX321, the heat generated by the LCD panel backlight and supporting electronics will be more noticeable. This is normal operation and not a cause for concern.

If your SONY BRAVIA KDL-22BX321 shows double images or ghosts, check your cable/antenna connections and verify the antenna location and direction.

To improve noisy reception on the SONY BRAVIA KDL-22BX321, make sure you use a 75-ohm coaxial cable, keep the antenna cable away from other cords, and ensure your antenna cable is not damaged.

If a black box appears on the SONY BRAVIA KDL-22BX321 screen, you may have selected a text option when no text is available. Set the CC Display option to Off in the Setup Settings, or if you intended to use closed captioning, select CC1 instead of Text1-4.

To adjust the color temperature on the SONY BRAVIA KDL-22BX321, go to the Picture settings and select Color Temperature. You can choose from Cool (bluish tint), Neutral (neutral tint), or Warm 1/Warm 2 (reddish tint).

You can adjust the brightness of the SONY BRAVIA KDL-22BX321 by going to the Picture settings and selecting the Brightness option.

To optimize sound for spoken dialog on the SONY BRAVIA KDL-22BX321, go to the Sound settings and set the Sound Mode to Clear Voice.

To enable or disable the start-up sound on your SONY BRAVIA KDL-22BX321, go to the Setup settings and adjust the Start-up Sound option.

Yes, you can adjust the sharpness on the SONY BRAVIA KDL-22BX321 by accessing the Picture settings and using the Sharpness slider.

The Picture Frame feature on the SONY BRAVIA KDL-22BX321, accessible when playing back photos via USB, allows you to display a photograph for a selected period of time before the TV automatically switches into standby mode.

CineMotion on the SONY BRAVIA KDL-22BX321 provides improved picture movement and reduces picture blur and graininess for film-based content. It is recommended to set this to Auto.

In the Setup Settings menu of your SONY BRAVIA KDL-22BX321, you can select Picture Adjustments Lock and set it to Lock to prevent any adjustments from being made to the Picture settings.

The SONY BRAVIA KDL-22BX321 offers several Surround sound modes, including Cinema (for movie theater-like effects), Music (for concert hall-like effects), Sports (for live sports contest effects), and Game (to enhance game sound).

You can use the Volume Offset feature in the SONY BRAVIA KDL-22BX321 Sound settings to adjust the volume level of the current input relative to other inputs.

When you set Steady Sound to On in the SONY BRAVIA KDL-22BX321 Sound settings, it stabilizes the volume across all programs and commercials.

You can reset your current Eco settings on the SONY BRAVIA KDL-22BX321 to their factory defaults by navigating to the Eco settings and selecting Reset.

To label channels on your SONY BRAVIA KDL-22BX321, go to the Channel Settings, select Label Channels, scroll to the channel number you want to edit, and then use the arrow buttons to scroll through characters to create a label up to seven characters long.

If you feel an analog channel on your SONY BRAVIA KDL-22BX321 needs better tuning, go to the Channel Settings, select Analog Fine Tune, and choose Auto to let the TV adjust it for the best picture quality.

When set to Auto Wide mode, your SONY BRAVIA KDL-22BX321 will automatically adjust the screen display mode based on the resolution of the incoming signal to fill the screen properly.

Running Auto Program on the SONY BRAVIA KDL-22BX321 will automatically set up the channel list for all receivable channels, but it will also clear your current Favorites list.

The JUMP button on the remote for your SONY BRAVIA KDL-22BX321 allows you to jump back and forth between two channels or external inputs, alternating between the current and last selected channel or input.

In the Screen settings of your SONY BRAVIA KDL-22BX321, you can adjust the Display Area settings to change how the picture fits on the screen, with options such as Full Pixel, +1, Normal, and -1.

If you are in Wide Zoom or Zoom modes on your SONY BRAVIA KDL-22BX321, you can adjust the Horizontal Center setting to move the position of the picture left or right on the screen.

When a PC is connected, the SONY BRAVIA KDL-22BX321 provides PC settings where you can adjust the Wide Mode, perform Auto Adjustment, fine-tune Phase and Pitch, and adjust the Horizontal and Vertical Center positions.