SONY BRAVIA KDL-32BX321 (03) PDF Document

To clean the screen of your SONY BRAVIA KDL-32BX321, be sure to unplug the power cord first to avoid electric shock. Wipe the LCD screen gently with a soft cloth. You may remove stubborn stains with a cloth slightly moistened with a solution of mild soap and warm water. Never use strong solvents such as a thinner, alcohol, or benzine.

Moving your SONY BRAVIA KDL-32BX321 from a cold area to a warm area can cause moisture condensation. This may lead to poor picture or poor color. Allow the moisture to evaporate completely before powering the SONY BRAVIA KDL-32BX321 on.

You can connect your cable or antenna system to the CABLE/ANTENNA input on the rear of your SONY BRAVIA KDL-32BX321 using a 75-ohm coaxial cable. It is strongly recommended to use this type of cable to receive optimum picture quality.

You can use an optional A-B RF switch to switch between cable and over-the-air antenna programming. After connecting, ensure you set the Signal Type setting to either Cable or Antenna under the Channel settings menu on your SONY BRAVIA KDL-32BX321.

To run the initial setup on your SONY BRAVIA KDL-32BX321, turn on the TV and the initial setup screen will appear. Use the remote control directional buttons to highlight options and the center button to select. Follow the on-screen instructions to set the language, viewing environment, and perform an Auto Program to scan for channels.

The SONY BRAVIA KDL-32BX321 supports JPEG photo files with the extension .jpg and conforming to DCF 2.0 or Exif 2.21.

The SONY BRAVIA KDL-32BX321 supports MP3 music files with the .mp3 extension that have not been copyrighted.

The SONY BRAVIA KDL-32BX321 supports MPEG1 and MPEG2 video files with the .mpg extension.

Connect your USB device to the SONY BRAVIA KDL-32BX321. Press the HOME button on your remote, then use the directional buttons to select Photo, Music, or Video. Press the center button to open the file or folder list.

While tuned to the channel or viewing the input, press the HOME button. Select Favorites, then highlight Add to Favorites and press the center button. Your SONY BRAVIA KDL-32BX321 will add this to the list.

You can change the Wide Mode on your SONY BRAVIA KDL-32BX321 by pressing the WIDE button on your remote repeatedly to cycle through the available settings.

Press the HOME button on your remote. Select Settings, then Screen settings. Select Auto Wide and set it to On for your SONY BRAVIA KDL-32BX321.

Press HOME, select Settings, then Setup settings. Select Label Video Inputs in AV Setup. Choose the input you want to label and select a name from the list to assign to that input on your SONY BRAVIA KDL-32BX321.

While in PC mode, press OPTIONS on the remote. Select PIP from the menu to show the sub window. To swap audio between windows, select Audio Swap from the OPTIONS menu on your SONY BRAVIA KDL-32BX321.

Turn on your SONY BRAVIA KDL-32BX321. While holding down the Up arrow button on your remote, press the Power button on the TV set. The TV will turn itself off and back on again. Release the Up button once the TV turns on. Note that this will clear all customized settings.

If you lose or forget your password for the Parental Lock on your SONY BRAVIA KDL-32BX321, you can use the master password 4357 to clear the previous password and enter a new one.

Press HOME, select Settings, then Setup. Select HDMI Settings and set Control for HDMI to On on your SONY BRAVIA KDL-32BX321.

Press the SYNC MENU button on the remote to display the menu and select your connected HDMI equipment from the list on your SONY BRAVIA KDL-32BX321.

Press HOME, select Settings, then Picture. Here you can adjust parameters like Backlight, Picture contrast, Brightness, Color, Hue, and Sharpness for your SONY BRAVIA KDL-32BX321.

In the Picture settings menu, you can adjust the Noise Reduction and MPEG Noise Reduction settings to High, Medium, Low, or Off to improve picture quality on your SONY BRAVIA KDL-32BX321.

In the Picture settings menu, select Color Temperature. You can choose from Cool, Neutral, or Warm 1/Warm 2 to adjust the white balance of your SONY BRAVIA KDL-32BX321.

Press HOME, select Settings, then Sound. You can adjust Treble, Bass, Equalizer, and Balance settings to suit your preferences on your SONY BRAVIA KDL-32BX321.

In the Sound settings menu, select Surround. You can set it to On, or choose specific profiles like Cinema, Music, Sports, or Game depending on what you are watching on your SONY BRAVIA KDL-32BX321.

In the Sound settings menu, set Steady Sound to On. This helps stabilize the volume across different programs and commercials on your SONY BRAVIA KDL-32BX321.

In the Sound settings menu, select Speakers and change it from TV Speakers to Audio System on your SONY BRAVIA KDL-32BX321.

Press HOME, select Settings, then Setup. Select Sleep Timer and choose the duration in minutes (15, 30, 45, 60, 90, or 120) that you want the SONY BRAVIA KDL-32BX321 to stay on before turning off.

Press HOME, select Settings, then Setup. Select Closed Captions (CC). You can set CC Display to On, Off, or On when Muting. You can also further customize Analog CC and Digital CC options on your SONY BRAVIA KDL-32BX321.

Press HOME, select Settings, then Setup. Select Language and choose your preferred language (English, Español, or Français) for the SONY BRAVIA KDL-32BX321.

Press HOME, select Settings, then Eco. You can adjust Power Saving, set Idle TV Standby, enable Auto Shut Off, and configure the Light Sensor on your SONY BRAVIA KDL-32BX321.

In the Eco settings menu, you can set Power Saving to Off, Low, High, or Picture Off on your SONY BRAVIA KDL-32BX321 to manage power consumption.

In the Eco settings menu, you can select Idle TV Standby to have the SONY BRAVIA KDL-32BX321 power off automatically after 1h, 2h, or 4h of inactivity.

Press HOME, select Settings, then Parental Lock. You must enter your password. You can then configure rating levels, block specific channels, or block external inputs on your SONY BRAVIA KDL-32BX321.

Press HOME, select Settings, then Channel. Select Show/Hide Channels. Use the directional buttons to find the channel you want to hide, then press the center button to select it and confirm that it will be hidden on your SONY BRAVIA KDL-32BX321.

Press HOME, select Settings, then Channel. Select Label Channels. Select the channel number, then use the directional buttons to choose characters for the label and press the center button to finish on your SONY BRAVIA KDL-32BX321.

Press HOME, select Settings, then Channel. Select Analog Fine Tune. You can manually adjust the tuning for the selected channel or select Auto to let the SONY BRAVIA KDL-32BX321 automatically adjust to the most appropriate setting.

Press HOME, select Settings, then Product Support. Select Signal Diagnostics to see information regarding the current signal on your SONY BRAVIA KDL-32BX321.

First, ensure the batteries are inserted correctly. If you still have trouble, check that no objects are blocking the IR sensor on the front of the SONY BRAVIA KDL-32BX321, and turn off nearby fluorescent lamps as they may interfere with the signal.

Press HOME, select Settings, then Picture. Select Picture Mode to choose between Vivid, Standard, Custom, Cinema, Photo, Sports, Game-Standard, Game-Original, or Graphics based on your content on your SONY BRAVIA KDL-32BX321.

Press HOME, select Settings, then Picture. Select Backlight and use the directional buttons to brighten or darken the backlight on your SONY BRAVIA KDL-32BX321.

Press HOME, select Settings, then Picture. Select Hue and use the directional buttons to increase or decrease the green tones on your SONY BRAVIA KDL-32BX321.

You should secure the SONY BRAVIA KDL-32BX321 to a wall or stand. You can use angle braces to secure the stand to the wall, and use screws or the optional Sony Support Belt Kit to secure the TV to the stand or wall, as described in the documentation.

When in PC mode, press HOME, select Settings, then Screen (or PC Settings). You can use the Auto Adjustment feature to automatically center the image, or manually adjust Horizontal Center and Vertical Center on your SONY BRAVIA KDL-32BX321.

The SONY BRAVIA KDL-32BX321 is Energy Star qualified when used in Home mode. Ensure you select Home during the initial setup to ensure compliance.

Press the INPUT button on your remote to display the list of external inputs and TV modes. Press repeatedly to toggle through the inputs until you select the one you want on your SONY BRAVIA KDL-32BX321.

The Standby LED on your SONY BRAVIA KDL-32BX321 lights up in red when the TV is in standby mode.

The Power LED on your SONY BRAVIA KDL-32BX321 lights up in green when the TV is turned on.

Press the SCENE button to optimize picture and sound quality for various content types, such as Cinema, Sports, Photo, Music, Game, or Graphics, or set it to Auto to have your SONY BRAVIA KDL-32BX321 choose automatically.

The model and serial numbers for your SONY BRAVIA KDL-32BX321 are located on the side and rear of the TV.

Press the MUTING button on your remote to mute the sound. Press it again or press the VOL + button to restore the sound on your SONY BRAVIA KDL-32BX321.

Press the JUMP button on the remote. The SONY BRAVIA KDL-32BX321 will alternate back and forth between the current channel/input and the last one you selected.

Press the DISPLAY button once on your remote to show the banner containing channel and program information on your SONY BRAVIA KDL-32BX321.

The 5 button, the Play button, and the CH + button on the SONY BRAVIA KDL-32BX321 remote control have tactile dots to act as a reference.

An HDMI or Component video connection is required to view 1080p video formats on the SONY BRAVIA KDL-32BX321.

Running the Auto Program on your SONY BRAVIA KDL-32BX321 will clear your Favorites list.

The 32 class SONY BRAVIA KDL-32BX321 has a 31.5 inch viewable image size, measured diagonally.

You can use the – or + buttons located on the side panel of the SONY BRAVIA KDL-32BX321 to adjust the volume.

Use the CH – or + buttons on the side panel of your SONY BRAVIA KDL-32BX321 to scan through channels.

Avoid operating the SONY BRAVIA KDL-32BX321 at temperatures below 41°F (5°C).

Yes, your PC must support one of the signal resolutions outlined in the PC Input Signal Reference Chart for the SONY BRAVIA KDL-32BX321 to display correctly.

In the Sound settings menu, you can select Speakers to TV Speakers for internal sound, or select Audio System if you have an external system connected to your SONY BRAVIA KDL-32BX321.

When carrying the SONY BRAVIA KDL-32BX321, ensure you disconnect all cables, use the adequate number of people, and use correct hand placement as shown in the product documentation.

Press HOME, select Settings, then Setup. Select Closed Captions (CC) and then Digital CC Options. You can set this to As Broadcast or Custom to configure font size, color, opacity, and background color on your SONY BRAVIA KDL-32BX321.

Press HOME, select Settings, then Channel. Select Auto Program and follow the prompts to scan for all receivable channels on your SONY BRAVIA KDL-32BX321.

You can adjust the Light Sensor in the Eco settings menu, which helps the SONY BRAVIA KDL-32BX321 optimize screen brightness based on ambient room light.

Use the Signal Diagnostics option found within the Product Support menu to view information about the signal currently received by your SONY BRAVIA KDL-32BX321.

The Start-up Sound setting in the Setup menu controls whether the SONY BRAVIA KDL-32BX321 plays a sound when turned on.

In the Screen settings menu, you can adjust the Display Area setting to Full Pixel, +1, Normal, or -1 depending on how the image is displayed on your SONY BRAVIA KDL-32BX321.

In the Parental Lock menu, if your country is set to U.S.A., you can set Unrated to Block to prevent programs without a rating from being shown on your SONY BRAVIA KDL-32BX321.