SONOS ARC (01) PDF Document

With the SONOS ARC, you have several choices for how to control the sound:

• Use the touch controls: Touch or swipe across the controls on the soundbar itself.

• Voice control: Set it up and use your voice to turn the TV on or off, adjust the volume, or play music.

• Use the Sonos S2 app: Control all aspects of your system from your mobile device.

• Use your TV remote control: The SONOS ARC can be programmed to respond to your existing TV remote.

The touch controls on your SONOS ARC allow for quick adjustments:

• Volume control: Touch the right side for volume up and the left side for volume down for small adjustments. Touch and hold to quickly change the volume.

• Play/Pause: Touch the center button to play or pause sound.

• Next/Previous (Music only): Swipe right across the touch controls to skip to the next song. Swipe left to go to the previous song. Note: You cannot skip forward or go back when listening to a radio station.

You can manage the microphone on your SONOS ARC for voice control:

• Tap the microphone light to turn the microphone on or off.

• When the light is on, voice control is on and you can use voice commands.

• When the light is off, voice control is off.

Note: If the light is off, you can still press and hold the Microphone indicator to talk to Alexa. Release the button to turn voice control off again.

The connector panel on the back of your SONOS ARC includes the following ports:

• AC power (mains) input: Use only the supplied power cord. Insert the power cord firmly until it is flush with the speaker.

• Join button: Press to connect during setup.

• Ethernet port: Use an Ethernet cable if you want to connect to a router, computer, or network-attached storage (NAS) device (optional).

• HDMI port: Use to connect the SONOS ARC to your TV.

For optimal performance when placing your SONOS ARC on a credenza or TV stand, follow these guidelines:

• Place horizontally on a stable and level surface.

• Keep 4.0″ (102 mm) space (minimum) between the top of the SONOS ARC and the bottom of your TV (if placing Arc below the TV).

• Don’t place it vertically or on its side.

• Make sure the touch controls are facing up.

Before you begin, disconnect any existing home theater equipment and connect any external devices (like a cable box) directly to your TV. Then, turn your TV on.

Step 1. Connect the power cord

1. Insert the power cord firmly into the SONOS ARC’s power port until it’s fully connected.

2. Plug the other end into a power outlet.

Step 2. Connect the HDMI cable to your TV

1. Fully insert the HDMI cable into the SONOS ARC’s HDMI port.

2. Connect the other end of the HDMI cable to your TV:

• If your TV has an HDMI ARC or eARC port, plug the HDMI cable directly into the TV port labeled ARC, eARC, or ARC/eARC.

• If your TV does not have an HDMI ARC port, you will need to connect the included optical audio adapter to your TV’s Digital audio out port instead.

If your TV doesn’t have an HDMI ARC or eARC port, you’ll use the included optical audio adapter to connect to your TV’s digital audio out port.

1. Remove the protective cap from the adapter.

2. Attach the optical adapter to the HDMI cable that is connected to your SONOS ARC.

3. Connect the optical adapter to the TV’s optical digital OUT port.

Note: The optical adapter’s port is “D-shaped”—make sure the connector aligns correctly into the port. Inserting the adapter incorrectly may damage the cable.

To ensure the best performance and a secure installation when wall mounting your SONOS ARC, please follow these guidelines:

• Use the Sonos Arc wall mount kit. Follow the instructions in the kit.

• Keep 4.0″ (102 mm) space (minimum) between the SONOS ARC and your TV.

• Make sure the touch controls are facing up.

• For best sound quality, keep both ends of the SONOS ARC at least 1′ (30cm) from a wall or other obstruction.

• Don’t discard the positioning guide that comes with the kit; it may look like packing material.

Follow these steps to wall mount your SONOS ARC using the official kit:

1. If your TV is wall-mounted, place the positioning guide against the wall, aligning the top edge with the bottom of your TV. There should be 5.5″ (140 mm) between the top of the wall mount bracket and the TV.

2. Mark the screw locations and remove the guide.

3. If you’re using the included wall anchors, use a 5/16″ drill bit to drill the pilot holes and then insert the wall anchors. Don’t use the anchors if you’re drilling into wood or plastic.

4. Position the wall mount bracket over the marked screw locations, using a level to confirm accuracy. Use a Phillips-head screwdriver or a power drill to screw the bracket to the wall, making sure the arrows in the center are pointing up.

5. Screw the 2 knobs into the back of the soundbar until they are fully tightened.

6. Connect the power and HDMI cables to the back of the soundbar.

7. Slide the soundbar down so the knobs fit into the slots on the wall bracket. Make sure the touch controls are facing up, and the soundbar is fully seated.

Use the following table to determine the correct pre-drill bit size and hardware for your wall type:

You can use the Sonos app to adjust sound settings or change the way your SONOS ARC works with your TV.

• TV dialog settings: If the TV audio is out of sync with the video, you can adjust the audio delay (lip sync) in your room’s settings.

• Group audio delay: If you notice audio issues when playing to a group, you can adjust this setting.

• TV Autoplay: If music is playing when you turn on your TV, the audio automatically switches to TV audio (default). You can turn this off in your room’s settings.

• Ungroup on Autoplay: If your home theater speaker is grouped with other products when you turn on the TV, it automatically drops from the group (default). You can turn this off in your room’s settings.

• Speech Enhancement: Makes TV dialog easier to hear.

• Night Sound: Enhances quiet sounds and reduces the intensity of loud sounds. Turn on to reduce the volume while still experiencing proper balance and range.

• Remote control setup: During setup, you’ll program a remote control. You can program a different remote control any time.

When you add speakers as surrounds to your SONOS ARC, the surround sound is optimized for your room. You can adjust these settings in the Sonos app:

You can customize your SONOS ARC for your specific surroundings using Room Settings in the Sonos app:

• Trueplay: Trueplay analyzes the surroundings in a room and then adjusts each woofer and tweeter to provide you with the best sound for that room.

• EQ settings: You can change the sound settings (bass, treble, balance, or loudness) to suit your personal preferences.

• Room name: If you move your speaker to a new room, you can change its name in your room’s settings.

• Status light: If the status light is distracting, you can turn it off in your room’s settings.

• Speaker touch controls: You can disable the touch control buttons on your speaker to prevent accidental adjustments.

• Set max volume: You can set a maximum volume for each room.

How you update your network information depends on your Sonos setup type:

• If you have a wireless setup (no Sonos product connected to your router): After you install a new router or change your network password, update your Sonos system with the new network information. Just open the Sonos app and it will walk you through it.

• If you have a wired setup (a Sonos product is connected to your router): You don’t have to do anything when you install a new router (as long as you connect a Sonos product to it) or when you change your password. Your Sonos products will continue to work as before.

Please follow these safety instructions when using your SONOS ARC:

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry soft cloth. Household cleaners or solvents can damage the finish on your Sonos components.

7. Do not block any ventilation openings. Leave a recommended space of 4“ (10cm) around the unit. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.

9. Protect the power cable from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

10. Only use attachments/accessories specified by the manufacturer.

11. Unplug this apparatus during lightning storms or when unused for long periods of time.

12. Refer all servicing to Sonos qualified service personnel.

13. The Mains plug should be readily available to disconnect the equipment.

14. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

15. Do not expose apparatus to dripping or splashing and do not place objects filled with liquids, such as vases, on the apparatus.

If your product is wallmounted:

• Improper or inadequate wallmount installation could cause your device to fall, resulting in personal injury.

• Never hang from the Sonos product or the wall bracket.

• Once wall-mounted, periodically check to ensure screws remain securely tightened.