SONOS ARC SL (01) PDF Document

The SONOS ARC SL is a premium smart soundbar for TV, movies, and music with the following features:

• 3D sound with Dolby Atmos.

• Eleven high-performance drivers, including custom elliptical woofers and angled side tweeters for rich bass and clear dialogue.

• Advanced processing that creates five phased-array channels to deliver sound from all directions.

• Quick and easy setup with only one cable to connect to your TV.

• An elegant design that can be discreetly mounted to the wall or placed on a credenza.

• Expandable system: Add a Sub and a pair of Sonos speakers for 5.1 surround sound.

• Compatible with Sonos S2 only.

You have several choices for how to control the sound on your SONOS ARC SL:

• Use the touch controls: Touch or swipe across the controls on the soundbar itself.

• Use the Sonos S2 app: Control all aspects of your soundbar from your mobile device.

• Use your TV remote control: Program your existing TV remote to control the SONOS ARC SL.

The touch controls on your SONOS ARC SL allow for quick adjustments:

• Volume control: Touch for small adjustments or touch and hold to quickly change the volume. Touch the right side for Volume up and the left side for Volume down.

• Play/Pause: Touch the center button to play or pause sound.

• Next/Previous (Music only): Swipe right across the touch controls to skip to the next song. Swipe left to go to the previous song. Note: You can’t skip forward or back when listening to a radio station.

• Status light: Indicates the status of the soundbar.

The connector panel on the back of your SONOS ARC SL includes the following ports:

• AC power (mains) input: Use only the supplied power cord. Insert the cord firmly until it is flush with the speaker.

• Join button: Press this button to connect your soundbar during setup.

• Ethernet port: Use an Ethernet cable if you want to connect to a router, computer, or network-attached storage (NAS) device (optional).

• HDMI port: Use this port to connect the SONOS ARC SL to your TV.

To ensure the best performance when placing your SONOS ARC SL on a credenza, follow these guidelines:

• Place horizontally on a stable and level surface.

• Keep 4.0″ (102 mm) of space (minimum) between the top of the SONOS ARC SL and the bottom of your TV (if placing it below the TV).

• Do not place the soundbar vertically or on its side.

• Make sure the touch controls are facing up.

Before you begin, disconnect any existing home theater equipment and connect any external devices (like a cable box) directly to your TV. Then, turn your TV on.

Step 1: Connect Power

Insert the power cord firmly into the SONOS ARC SL’s power port until it’s fully connected, then plug the other end into a power outlet.

Step 2: Connect HDMI Cable

Use the included HDMI cable to connect the soundbar to your TV.

1. Fully insert the HDMI cable into the SONOS ARC SL’s HDMI port.

2. Connect the other end of the HDMI cable to your TV:

• If your TV has an HDMI ARC or eARC port, plug the HDMI cable directly into the TV port labeled ARC, eARC, or ARC/eARC.

• If your TV does not have an HDMI ARC port, you will need to connect the included optical audio adapter to your TV’s Digital audio out port instead. The app will guide you through this during setup.

Note: HDMI ARC is a special port that looks like a standard HDMI port. If you connect the SONOS ARC SL to a standard HDMI port, you won’t hear any sound.

If your TV doesn’t have an HDMI ARC or eARC port, you’ll use the included optical audio adapter to connect to your TV’s digital audio out port.

1. Remove the protective cap from the adapter.

2. Attach the optical adapter to the HDMI cable.

3. Connect the optical adapter to the TV’s optical digital OUT port.

Note: The optical adapter’s port is “D-shaped”—make sure the connector aligns correctly into the port. Inserting the adapter incorrectly may damage the cable.

Follow these guidelines for the best sound quality and a secure installation of your SONOS ARC SL:

• Use the Sonos Arc SL wall mount kit. Follow the instructions included in the kit.

• Keep 4.0″ (102 mm) of space (minimum) between the SONOS ARC SL and your TV.

• Make sure the touch controls are facing up after mounting.

• For best sound quality, keep both ends of the Arc SL at least 1′ (30cm) from a wall or other obstruction.

Follow these steps to mount your SONOS ARC SL to the wall:

1. If your TV is wall-mounted, place the positioning guide against the wall, aligning its top edge with the bottom of your TV. There should be 5.5″ (140 mm) between the top of the wall mount bracket and the TV.

2. Mark the screw locations and remove the guide.

3. If you’re using the included wall anchors, use a 5/16″ drill bit to drill the pilot holes and then insert the wall anchors. Do not use anchors if drilling into wood or plastic.

4. Position the wall mount bracket over the marked screw locations, using a level to confirm accuracy. Use a Phillips-head screwdriver or a power drill to screw the bracket to the wall, making sure the arrows in the center are pointing up.

5. Screw the 2 knobs into the back of the soundbar until they are fully tightened.

6. Connect the power and HDMI cables to the back of the soundbar.

7. Slide the soundbar down so the knobs fit into the slots on the wall bracket. Make sure the touch controls are facing up and the soundbar is fully seated.

Audio

• Amplifier: Eleven Class-D digital amplifiers.

• Elliptical Woofer: Eight full-range woofers ensure you’ll hear the faithful playback of mid-range vocal frequencies plus deep, rich bass.

• Tweeter: Three silk dome tweeters create a crisp and clear high-frequency response.

General

• System Requirements: TV with HDMI Arc SL or optical digital audio output, broadband internet, and the Sonos S2 app.

• Ethernet Port: One 10/100 Mbps Ethernet port.

• Power Supply: Auto-switching 100-240 V, 50-60 Hz 3.5 A AC universal input.

• Dimensions (H x W x D): 3.4 x 45 x 4.5 in. (87 x 1141.7 x 115.7 mm).

• Weight: 13.78 lb (6.25 kg).

• Operating Temperature: 32° F to 104° F (0° C to 40° C).

• Storage Temperature: -4° F to 122° F (-20° C to 50° C).

• Supported Devices: Connects to TV with HDMI cable (with or without an attached optical adapter). Plays sources connected to the TV, including cable boxes and game consoles.

• Package Contents: Sonos Arc SL, AC power cord, HDMI cable, optical audio adapter, Quickstart Guide.

Please follow these safety instructions for your SONOS ARC SL:

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions. If your product is wallmounted, be aware that improper installation could cause injury. Never hang from the product or bracket and periodically check that screws remain tight.

5. Do not use this apparatus near water.

6. Clean only with dry soft cloth. Household cleaners or solvents can damage the finish.

7. Do not block any ventilation openings. Leave a recommended space of 4“ (10cm) around the unit.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.

9. Protect the power cable from being walked on or pinched.

10. Only use attachments/accessories specified by the manufacturer.

11. Unplug this apparatus during lightning storms or when unused for long periods of time.

12. Refer all servicing to qualified service personnel.

13. The Mains plug should be readily available to disconnect the equipment.

14. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

15. Do not expose apparatus to dripping or splashing and do not place objects filled with liquids, such as vases, on the apparatus.