SONOS MOVE (02) PDF Document

The SONOS MOVE is a durable, battery-powered smart speaker designed for both indoor and outdoor listening. Its key features include:

• A rechargeable battery that lasts up to 10 hours. It can be easily recharged by setting the speaker on its charging base or by using a compatible USB-C charger for power on the go.

• A weatherproof design (IP56 rating) ideal for outdoor events like barbecues and pool parties.

• Dual streaming modes: stream over WiFi at home and switch to Bluetooth anywhere else.

• Built-in voice control with Amazon Alexa and the Google Assistant.

• Compatibility with other Sonos speakers for multi-room listening.

• Works with either the Sonos S2 or Sonos S1 app.

You can control your SONOS MOVE using the touch controls on top of the speaker. Note that if you do not want anyone to control playback or volume using these controls, you can disable them in the room’s settings.

• Volume control: Touch and hold the dotted icons to quickly change the volume. The right side is Volume Up, and the left side is Volume Down.

• Play/Pause: Press the Play/Pause icon once to play or pause music. Press and hold it to add the music that’s playing in another room.

• Next/Previous Track: Swipe right across the touch controls to skip to the next song. Swipe left to go to the previous song. Please note, you cannot skip forward or back when listening to a radio station.

• Microphone: Tap the microphone light to turn the microphone on or off.

The SONOS MOVE has several indicator lights to show its status:

• Status Light: This light indicates the speaker’s general status. If the light is distracting, you can turn it off in your room’s settings.

• Microphone Indicator: This light indicates the microphone’s status. When the light is on, auto Trueplay tuning is enabled, and if you have a voice service set up, voice control is also on. When the light is off, voice control and auto Trueplay are off.

• Battery Light: This light indicates the battery status. The remaining battery life is always visible in the Sonos app.

The back panel of the SONOS MOVE features several buttons for core functions:

• Join button: Press this button to connect your SONOS MOVE to your Sonos system during setup.

• Power button: Press to power on. Press and hold to power off. When the SONOS MOVE is off its charging base, it goes to sleep to save battery when not in use; press the power button to wake it up.

• Bluetooth/WiFi toggle button: This button toggles the speaker between Bluetooth and WiFi modes. Use WiFi for setup and listening at home, and switch to Bluetooth when WiFi is not available.

There are two ways to charge your SONOS MOVE:

1. Using the Charging Base: Simply set the SONOS MOVE on the included charging base for easy recharging without extra wires. Ensure the speaker is seated properly so the charging contacts are touching. The charging base is for indoor use only and should be kept dry.

2. Using the USB-C Port: For charging on the go, use a compatible USB-C charger. The port may also be used for diagnostic purposes. Note that a USB-C cable is not included.

The remaining battery life of your SONOS MOVE is always visible in the Sonos app.

To get the best sound from your SONOS MOVE, follow these placement guidelines:

• The speaker is designed to provide powerful sound anywhere. Its auto Trueplay tuning feature periodically balances the sound for its location. For this to work, the microphone must be on. If you usually keep it off, turn it on for a few minutes whenever you move the speaker to a new location.

• SONOS MOVE sounds great even when placed next to a wall or on a shelf. For best performance, leave at least 1 inch (2.5 cm) of space around the back of the speaker.

• Do not use or store your SONOS MOVE upside down.

The SONOS MOVE is designed to be ultra durable. It features a tough outer shell and an IP56 rating, which means it is built to withstand falls, bumps, moisture, dust, UV rays, and extreme temperatures. While it can handle moisture, it should not be left out in a soaking rain storm. The included charging base is for indoor use only.

Automatic Trueplay tuning is a feature that optimizes the sound of your SONOS MOVE for wherever you are and whatever you’re listening to. The speaker’s microphone is used to detect the environment, allowing auto Trueplay to make periodic tuning adjustments to deliver the best sound. If you don’t want the microphone on all the time, be sure to turn it on whenever you move the speaker. Your SONOS MOVE starts retuning when you pick it up and continues to adjust the sound for a few minutes after you place it in a new location. Note that auto Trueplay is disabled while you’re using Bluetooth if Google Assistant is set up as your voice assistant.

The microphone on the SONOS MOVE is used for voice control and for auto Trueplay tuning. Touch the microphone icon on the speaker to turn it on or off.

When the microphone light is on:

• If you have a voice assistant, voice control is on and your voice assistant is ready to respond.

• Auto Trueplay tuning is enabled so the SONOS MOVE can automatically adjust its sound for your surroundings.

When the microphone light is off:

• If you have a voice assistant, voice control is off.

• Auto Trueplay tuning is disabled.

First, set up your SONOS MOVE on your WiFi network. Then, use the mode switch on the back of the speaker to switch between Bluetooth and WiFi. To pair with a device for the first time:

1. Turn Bluetooth on in your mobile device settings.

2. Press the mode button on the back of your SONOS MOVE to switch it to Bluetooth.

3. Choose “Move” from the list of available devices on your mobile device. If it’s not there, press and hold the mode button and then choose “Move” from the list when it appears.

Once paired, your mobile device will automatically connect to the SONOS MOVE the next time you switch to Bluetooth mode.

* Specifications subject to change without notice.