SONOS ONE SL (01) PDF Document

You can control your SONOS ONE SL using the touch controls on the top of the speaker.

Volume control:

Touch for small adjustments or touch and hold to quickly change the volume.

• Volume up is on the right.

• Volume down is on the left.

Play/Pause:

• Press once to play or pause music.

• Press and hold to add the music that’s playing in another room.

Next/Previous:

• Swipe right across the touch controls to skip to the next song.

• Swipe left to go to the previous song.

Note: You can’t skip forward or go back when listening to a radio station.

The status light on your SONOS ONE SL indicates the speaker’s status. If the light is distracting, you can turn it off in your room’s settings.

Yes, if you don’t want anyone (like a child) to control playback or change the volume using the speaker touch controls, you can disable them in the room’s settings.

The connector panel on the back of your SONOS ONE SL has the following ports:

• Join button: Press to connect during setup.

• Ethernet port: Use an Ethernet cable if you want to connect to a router, computer, or network-attached storage (NAS) device (optional).

• AC power (mains) input: Use only the supplied power cord. Using a third-party power cord will void your warranty. Insert the power cord firmly until it is flush with the bottom of the speaker.

You can put your SONOS ONE SL speaker just about anywhere. Here are a few guidelines for placement:

• The SONOS ONE SL sounds great even when placed next to a wall or on a shelf. For best performance, leave at least 1″ (2.5 cm) space around the back of the speaker.

• It’s humidity-resistant so you can use it in the bathroom.

• It’s not water-resistant so don’t put it near water or leave it in the rain.

You can pair two SONOS ONE SL speakers in the same room for a wider, stereo experience. One speaker serves as the left channel and one serves as the right channel. Please note that the Sonos speakers in a stereo pair must be the same type.

The SONOS ONE SL is ideal for home theater surrounds. You can pair it with a Sonos One or another One SL for left-right stereo sound, or use a pair as rear surrounds for your home theater. It is easy to turn two Sonos speakers (same model) into separate right and left channels for your home theater.

The following are the specifications for the SONOS ONE SL. Note that specifications are subject to change without notice.

Please follow these important safety instructions for your SONOS ONE SL:

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry soft cloth. Household cleaners or solvents can damage the finish on your Sonos components.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.

9. Protect the power cable from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

10. Only use attachments/accessories specified by the manufacturer.

11. Unplug this apparatus during lightning storms or when unused for long periods of time.

12. Refer all servicing to Sonos qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cable or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

13. The Mains plug should be readily available to disconnect the equipment.

14. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

15. Do not expose apparatus to dripping or splashing and do not place objects filled with liquids, such as vases, on the apparatus.