SMARTAB ST1020 (01) PDF MANUAL

The box contains:

• 10.1″ tablet
• Keyboard
• Micro USB cable
• Charger
• User guide

Connect the tablet to a wall outlet using the included power adaptor (charger and Micro USB cable). Plug the charger into the wall outlet and the Micro USB cable into the DC charger port on the tablet. When charging, the lightning indicator will appear in the battery icon.

During charging, keep your device and charger near room temperature for efficient battery charging. Note that new batteries or batteries stored for a long time may take more time to charge.

• Turn off Wi-Fi when it’s not in use.
• Lock the tablet (turning the display off) to shorten charging time.
• To optimize battery time and performance, adjust the “Brightness” and “Screen timeout” options in the Settings panel.
• It is recommended to keep the brightness level at 50% or under if the tablet is in use while charging.

Press and hold the Power button until the startup screen (Packard Bell logo) appears.

Press and hold the Power button until the “Power off” option appears on the screen, then select it.

• Lock (standby): Briefly press the Power button to turn off the display and conserve battery.
• Unlock: Briefly press the Power button to turn the screen on, then slide the “Lock icon” up.

If the tablet malfunctions or freezes, you can reset it. Take a metal pin (such as the end of a paper clip) and gently push the recessed Reset button located on the side of the tablet. Press the button to restart the device.

1. Press and hold the Power button to get started.
2. Follow the initial setup wizard prompts that appear on the screen.
3. To use the Google Play store, sign into your existing Google account or create a new Google account when prompted. If you use Gmail, you already have a Google account.

The tablet supports Micro SD cards up to 64GB (card not included).

• Insert: Carefully insert the Micro SD card into the Micro SD card slot on the side of the tablet until it clicks and locks into place. Ensure the orientation is correct as shown in the diagram.
• Remove: Gently press the Micro SD card inward; it will then eject.

Google Play is a digital content experience from Google where you can find and enjoy music, movies, TV shows, books, Android™ apps, and games. You can access it from the web or your Android device, and content is instantly available across your devices.

Before cleaning, unplug all cables and turn off the tablet. Use a soft, lint-free cloth to clean the tablet and display. Avoid getting moisture in open ports. Do not use household cleaners, solvents, alcohol, or abrasives.

Do not use the tablet in rain or other wet locations. Avoid spilling any liquid on the tablet. If the tablet gets wet, unplug all cables, turn it off, and do not attempt to dry it with an external heat source.

If for any reason the screen (display) is fractured or cracked, immediately remove this product from use and contact Customer Support.

It is rare but possible for seizures to be triggered by light flashes or patterns. To reduce exposure to this potential hazard, play/watch in a well-lit room, sit an appropriate distance from the screen, and take 10-to 15-minute breaks every hour.

Long-term exposure to loud sounds at high volume may result in permanent hearing loss. When using headphones or earbuds, listen at lower volumes for shorter periods. Set the volume while in a quiet environment and turn it down if you cannot hear people speaking near you. Limit listening time (e.g., 90 minutes followed by a quiet period). If you experience ringing in your ears or hear muffled speech, stop listening and have your hearing checked.

The components are identified as follows:

Number	Component	Number	Component
1	Power button	8	DC charger port
2	Volume buttons	9	Micro SD card slot
3	Front camera	10	Reset button
4	Rear camera	11	Speaker
5	Microphone	12	Pogo pins
6	Headphone jack	13	Touchpad
7	Micro USB port

*(Note: Component locations are shown in the diagrams in the PDF.)*

Use the navigation bar at the bottom of the screen:

• Previous: Tap the triangle icon to go back to the previous screen.
• Home: Tap the circle icon to return to the main Home Screen.
• Multitasking: Tap the square icon to view recently used apps.

Swipe up from the bottom of the Home Screen to access the Apps Screen, which displays all installed applications.

Press and hold anywhere on an empty space on the Home Screen. Select the “Widgets” option from the menu that appears. Then, press and hold the desired widget and drag it to the preferred location on the Home Screen.

Swipe down once from the top edge of the screen. This panel allows you to browse and reply to emails, check software updates, reminders, manage USB connection options, and more.

Swipe down twice from the top edge of the screen. This expands the Quick Settings panel, where you can easily enable or disable Wi-Fi, Bluetooth, Airplane mode, Auto-rotate, Battery Saver, Do not disturb, and other settings by tapping their icons.

Access the Quick Settings panel by swiping down twice from the top of the screen. Tap the Wi-Fi icon or the Bluetooth icon to toggle them on or off.

From the Quick Settings panel (swipe down twice from the top), tap the Settings icon (shaped like a gear) to access the full settings menu.

To show your tablet’s screen on devices with Miracast Wireless display capabilities: 1. Turn on the Miracast feature on your Miracast-supported TV or Miracast dongle (not included). 2. Connect your tablet to the same Wi-Fi network as your Miracast-enabled device. 3. Go to Settings > Connected devices > Connection preferences > Cast. 4. Tap on the three dots menu icon (“!”) and select “Enable wireless display”. 5. Select the available Miracast display that appears in the list to start casting. *(Note: Optimal video performance is achieved with videos that are 720p or under.)*

• Dock: Align the tablet’s bottom edge (with the Pogo pins) to the keyboard dock connector, then slide the tablet into the dock until it sits securely. The tablet should automatically recognize the keyboard.
• Undock: Firmly hold the keyboard down, then gently pull the tablet upwards and away from the dock.

The touchpad does not have a mechanical click. To select an item or simulate a click, tap the surface of the touchpad. Do not push down hard on the touchpad.

This device contains a Lithium-ion battery. The battery must be recycled or disposed of properly. Contact your local waste management office for information on battery recycling or disposal. You can also call the recycling hotline at 1-800-822-8837.

To obtain warranty service for your product (within the 1-year parts and labor warranty period for the US/Canada): 1. Call Customer Support at 1-877-768-8481 (Toll Free, Monday – Friday: 8AM – 10PM EST) or go to http://www.southerntelecom.com and click on “Product Support” to receive an SRO number. 2. Provide proof of the date of purchase (dated bill of sale) within the package. 3. Prepay all shipping costs to the authorized service center and insure your return. 4. Include a return shipping address (no P.O. Boxes), a telephone contact number, and the defective unit within the package. 5. Describe the defect or reason for returning the product. The authorized service center address is: Customer Service Dept. 36 c/o Southern Telecom 400 Kennedy Drive Sayreville, NJ 08872 Your product will be repaired or replaced at the service center’s option. Damage resulting from shipping will require you to file a claim with the carrier. Warranty service does not cover damage from accident, misuse, abuse, improper installation, lack of reasonable care, or unauthorized modifications.