FREE ENGLISH SHURE WA504 (01) PDF DOCUMENT.
FREE ENGLISH SHURE WA504 (01) PDF USER GUIDE.
FREE ENGLISH SHURE WA504 (01) PDF USER MANUAL.
FREE ENGLISH SHURE WA504 (01) PDF OWNER GUIDE.
FREE ENGLISH SHURE WA504 (01) PDF OWNER MANUAL.
FREE ENGLISH SHURE WA504 (01) PDF REFERENCE GUIDE.
FREE ENGLISH SHURE WA504 (01) PDF INSTRUCTION GUIDE.
FREE ENGLISH SHURE WA504 (01) PDF REFERENCE MANUAL.
FREE ENGLISH SHURE WA504 (01) PDF INSTRUCTION MANUAL.
FREE ENGLISH SHURE WA504 (01) PDF OPERATING INSTRUCTIONS.
CLICK HERE TO DOWNLOAD SHURE WA504 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What is the WA504 Universal Mounting Bracket?
The WA504 is a universal mounting bracket used to connect two Shure products with different chassis configurations. It is a C-channel bracket with flanges that accomodates a variety of Shure mixers, transmitters and receivers.
How do I connect two Shure devices using the WA504 bracket?
To connect two Shure devices using the WA504, proceed as follows:
1. Position the bracket so it is flush to the side of the device with the side-mount chassis and install the supplied mounting screws.
2. Connect the device with the top mount chassis to the bracket flanges using the supplied mounting screws, being sure both devices are facing the same direction.
CLICK HERE TO DOWNLOAD SHURE WA504 (01) PDF DOCUMENT