SENCOR SDC 7200 (01) PDF Document

[SNOOZE] key: When the alarm is sounding, press to stop the current alarm and enter snooze mode.

[✓] key (Down Arrow): In setting mode, press to decrease setting values. Press and hold to quick adjust values.

[Clock Icon] key: In normal time mode, press and hold for 2 seconds to enter time setting mode. In time setting mode, press to enter the next setting mode.

[Alarm Icon] key: In normal time mode, press to enter the alarm time mode. Press and hold for 2 seconds to enter alarm setting mode. In alarm setting mode, press to enter the next setting. When the alarm is sounding, press to stop the current alarm and enter snooze.

[^] key (Up Arrow): In setting mode, press to increase setting values. Press and hold to quick adjust values.

[HI / LO / AUTO] slide switch: This switch controls the backlight brightness.

– AUTO: Brightness automatically adjusts based on ambient room lighting (dims in low light).

– LO: Sets the dimmer backlight.

– HI: Sets the brighter backlight.

[°C/°F] key: Press to switch the temperature display between Celsius (°C) and Fahrenheit (°F).

[LOOP] key: Press to turn the backlight color auto-looping mode on or off.

[RAINBOW] key: When the backlight is on, press to change the backlight color in a fixed sequence.

[TUNE] key: Press to fine-tune the LCD backlight with 256 available colors.

[RESET] key: Press to reset all values to their default settings. This is also used in case of a malfunction.

To set up your SENCOR SDC 7200 alarm clock, follow these steps:

1. Plug the adapter into the power jack on the back of the clock.

2. Press the [RESET] key to reset the clock to its default settings.

1. In normal time mode, press and hold the [Clock Icon] key for 2 seconds to enter the year setting.

2. Press the [^] or [✓] key to set your desired value. Press and hold the keys to quickly adjust the values.

3. Press the [Clock Icon] key to confirm and move to the next setting item. The sequence is: Year → Month → Date → 12/24 hour format → Hour → Minute → Second → Language.

4. There are 5 selectable languages: GB (English) → FR (French) → DE (German) → ES (Spanish) → IT (Italian).

5. After setting the language, press the [Clock Icon] key to save and exit the setting mode. The clock will also automatically exit the setting mode if no button is pressed for 30 seconds.

1. In normal time mode, press and hold the [Alarm Icon] key for 2 seconds until the alarm’s Hour digit flashes.

2. Press the [^] or [✓] key to change the hour. Press and hold the key to quickly adjust the value.

3. Press the [Alarm Icon] key to move to the Minute setting.

4. Press the [^] or [✓] key to change the minute.

5. Press the [Alarm Icon] key to save and exit the setting. The clock will automatically exit the setting mode after 30 seconds without any button press.

Note: When you set the alarm time, the alarm will automatically be turned on and the alarm icon will be displayed.

1. In normal time mode, press the [Alarm Icon] key to turn on the alarm function. The alarm icon will appear and the alarm time will be shown on the date section.

2. Press the [Alarm Icon] key again to turn on the snooze function. The snooze icon will appear.

3. Press the [Alarm Icon] key a third time to turn off both the alarm and snooze functions. The icons will be hidden from the screen.

When the alarm on your SENCOR SDC 7200 is sounding:

– If no key is pressed, the alarm will stop automatically after 1 minute and will sound again at the set alarm time on the next day.

– If the snooze function is activated, the alarm will sound 4 times at 5-minute intervals. The sound duration for each alarm is 1 minute.

– To stop the alarm and activate the snooze period, press the [SNOOZE] key or the [Alarm Icon] key.

You can change the backlight color of your SENCOR SDC 7200 in three ways. Note that these functions are only available when using the power adapter.

Auto Color Looping: Press the [LOOP] key to enter the auto color looping mode. The LCD backlight color will change automatically. Press the key again to stop the looping.

Manual Color Selection: Press the [RAINBOW] key to change the backlight color in the following sequence: white → red → orange → yellow → green → cyan → blue → purple.

Fine Tune Color: Press the [TUNE] key to fine-tune the LCD backlight with 256 available colors.

To adjust the backlight brightness of your SENCOR SDC 7200, use the [HI / LO / AUTO] slide switch on the back of the unit. This function is only available when using the power adapter.

– Slide to the [AUTO] position: The backlight brightness will automatically adjust based on the ambient room lighting (it dims in low light).

– Slide to the [LO] position: This sets the dimmer backlight.

– Slide to the [HI] position: This sets the brighter backlight.

You can press the [°C/°F] key to select the temperature unit between Celsius (°C) and Fahrenheit (°F). The temperature will display “Hi” or “Lo” under the following conditions:

Note: The temperature display range is not the same as the product’s operating temperature range.

The USB charging ports on the SENCOR SDC 7200 are available only when the clock is powered by the AC adapter.

1. When two low voltage devices are plugged into the clock’s USB ports at the same time, the total current output is 2.1A for both ports combined.

2. If only one low voltage device is plugged into the clock’s USB port, the maximum current output can reach 2.1A.

The SENCOR SDC 7200 uses a CR2032 lithium battery for backup purposes. This battery saves the time and alarm settings in case of a power outage. It is recommended to replace the battery after a long period of backup use.

To reset your SENCOR SDC 7200, press the [RESET] key located on the back of the unit. This will reset all values to their default settings. This can also be used in case of a malfunction.

– This main unit is intended to be used only indoors.

– Do not subject the unit to excessive force or shock.

– Do not expose the unit to extreme temperatures, direct sunlight, dust or a moist environment.

– Do not immerse in water.

– Avoid contact with any corrosive materials.

– Do not dispose of this unit in a fire as it may explode.

– The socket outlet shall be installed near the equipment and shall be easily accessible.

– Do not open the inner back case or tamper with any components of this unit.

– Please dispose of the used unit or batteries in an ecologically safe manner.