RAKO RLC-100 (01) PDF MANUAL

RAKO RLC-100 (01) PDF SUMMARY:

What should I do when I receive the RLC-xxx?

When delivered, the RLC-xxx should have a small plastic pullout tab. This allows easy removal of the cover plate during the initial setup of the handheld remote.

What is important when inserting the keypad into the RLC-xxx?

When inserting the keypad into the RLC-xxx it is important that it is oriented correctly. The diagonal arrow should always be pointed towards the top of the keypad.

What should I do with the aerial during keypad installation?

Small slots are provided in the webs around the inner perimeter of the case to locate the aerial. Care must be taken to keep the aerial in the grooves. If the aerial is not seated correctly or trapped under the RCM/RNC keypad, the front plate will not be able to be secured correctly.

How do I service the RLC if access to the RCM or RNC is required after using the pullout tab?

The base of the RLC case has three small feet, one of which has a small hole in the centre. To remove the front plate push a small pin or straightened paper clip through the hole to break the grip of the retaining magnets.