Post questions, comments, reviews or errors in the comment box below.
Your File is Ready … Download PDF
PDF Content Summary: RLC-xxx Instruction Manual Overview The RLC-xxx are cover plate kits for two, three, six, seven and ten button wireless keypads. Combining the RLC-xxx with an appropriate keypad creates a hand-held control panel. RLC-070 - Seven button For use with: RCM070, RNC070, RCM071, RCM072, RCM-Audio RLC-100 - Ten button For use with: RCM-100, RNC100, RCM-101, RCM-102, RCM103 RLC-020 - Two button For use with: RCM020, RNC020 RLC-030 - Three buttons For use with: RCM030 RLC-060 - Six buttons For use with: RCM060 RLC-xxx Manual Version 1.1.3 Installation When delivered the RLC-xxx should have a small plastic pullout tab. This allows easy removal of the cover plate during the initial setup of the handheld remote. When inserting the keypad into the RLC-xxx it is important that it is oriented correctly. The diagonal arrow should always be pointed towards the top of the keypad. Small slots are provided in the webs around the inner perimeter of the case to locate the aerial. NB Care must be taken to keep the aerial in the grooves. If the aerial is not seated correctly or trapped under the RCM/RNC keypad the front plate will not be able to be secured correctly. Servicing the RLC If after using the pullout tab access to the RCM or RNC is required use the method below. The base of the RLC case has three small feet, one of which has a small hole in the centre. To remove the front plate push a small pin or straightened paper clip through the hole to break the grip of the retaining magnets. RLC-xxx Manual Version 1.1.3
FREE ENGLISH PDF
USER GUIDE - USER MANUAL
OWNER GUIDE - OWNER MANUAL
REFERENCE GUIDE - REFERENCE MANUAL
INSTRUCTION GUIDE - INSTRUCTION MANUAL