FREE ENGLISH PYLE PRO PPHP893 (01) PDF DOCUMENT.
FREE ENGLISH PYLE PRO PPHP893 (01) PDF USER GUIDE.
FREE ENGLISH PYLE PRO PPHP893 (01) PDF USER MANUAL.
FREE ENGLISH PYLE PRO PPHP893 (01) PDF OWNER GUIDE.
FREE ENGLISH PYLE PRO PPHP893 (01) PDF OWNER MANUAL.
FREE ENGLISH PYLE PRO PPHP893 (01) PDF REFERENCE GUIDE.
FREE ENGLISH PYLE PRO PPHP893 (01) PDF INSTRUCTION GUIDE.
FREE ENGLISH PYLE PRO PPHP893 (01) PDF REFERENCE MANUAL.
FREE ENGLISH PYLE PRO PPHP893 (01) PDF INSTRUCTION MANUAL.
FREE ENGLISH PYLE PRO PPHP893 (01) PDF OPERATING INSTRUCTIONS.
CLICK HERE TO DOWNLOAD PYLE PRO PPHP893 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the main features of the PYLE PRO PPHP893 speaker cabinet?
The PYLE PRO PPHP893 is an 8″ 400Watts 2-way Plastic Molded Speaker Cabinet with the following features:
• 8″ woofer
• 1″ Titanium Compression Driver
• Dual 1/4″ and Speakon Jacks input
• 2-Way Ported Enclosure for Extra Bass Response
• PTC Driver Protect
• Power Max: 400Watts
• Power RMS: 200Watts
• Impedance: 8ohm +/- 20%
• Sensitivity: 95 +/- 3Db
• Frequency Response: 45Hz-20Khz
• Metal Grill To Protect The woofer / Plastic Cabinet
• Crossover Frequency: 3.0Khz
• 35mm Speaker Stand Mount
• Dimensions: 13.8inch X 11.8inch X 19.3inch
What are the detailed specifications for the PYLE PRO PPHP893?
The following are the specifications for the PYLE PRO PPHP893:
| WOOFER | |
|---|---|
| Impedance | 8 OHM |
| Sensitivity | 95 DB |
| Frequency | 45-20k Hz |
| Diameter | 8 INCH |
| Coil Diameter | 1.5 INCH |
| Magnet | 30 OZ |
| TWEETER | |
| Impedance | 8 OHM |
| Sensitivity | 101 DB |
| Frequency | 800Hz-20kHz |
| Coil Diameter | 1 INCH |
| Diaphragm | Titanium |
| Magnet | NEODYMIUM |
| GENERAL | |
| Built-in Amp | NO |
| Power (MAX) | 400W |
| Dimension | 13.8inch X 11.8inch X 19.3inch |
What are the Speakon and 1/4″ jacks used for on the PYLE PRO PPHP893?
Both the Speakon jack and the 1/4″ jack are used for Line level inputs. They can also offer signal to another passive speaker.
Can I mount the PYLE PRO PPHP893 speaker on a stand?
Yes, on the bottom of the PYLE PRO PPHP893 speaker, there is a hole to place a stand.
What caution should be taken when using a microphone with the PYLE PRO PPHP893?
Do not place the microphone against the speaker. This can cause feedback echo and it will damage the system.
CLICK HERE TO DOWNLOAD PYLE PRO PPHP893 (01) PDF DOCUMENT