PROLUX MIRAGE (01) PDF MANUAL

PROLUX MIRAGE (01) PDF SUMMARY:

What are the specifications of the Prolux Mirage Cordless Dual-Pad Floor Buffer/Polisher?

• Cordless, Lithium Ion battery powered.
• Brushless motor technology – Powerful, efficient, and maintenance free.
• Washable cleaning pads.
• Lightweight – Only weighs 6 lbs.
• Powerful 14.4v 2200mAh Lithium Ion battery.
• Extra long run times –32 minutes run time on High Speed and 41 minutes run time on Low Speed.
• Quick charging – Fully charges in just under 2.5 hours.
• Dependable design & Brushless Motor – Allowing it to come with a 3-year limited motor warranty & 2-Year limited body warranty.
• 11.15 fl. oz. water/solution tank capacity.
• High-powered spray nozzle – 2ft-spraying radius.
• Powerful L.E.D. headlights (good for 50,000+ hours of use).
• Quick and easy to change Velcro backed cleaning pads.

---

What are the important safety instructions to consider when using the Prolux Mirage?

• Read all instructions in the operating manual before using the appliance.
• Keep the operating manual for reference and include it when passing the appliance to third parties. Violations of the operating instructions can lead to severe injuries and damages to the appliance.
• Do not leave the cleaner when plugged in or while the battery is installed. Unplug from the outlet or remove the battery when not in use, and before servicing.
• Use only as described in the manual. Use only the recommended attachments, battery, charger, and replacement parts.
• To reduce the risk of electric shock, do not use outdoors or on over-saturated surfaces.
• Do not use a damaged cord or plug. If the cleaner is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, take it to a service center before use.
• Do not pull or carry the cleaner by its power cord or charging cord, and avoid closing doors on or running the cleaner over the cord.
• Do not unplug the power cord/charging cord from your wall by pulling on the cord. Grasp the end of the plug, not the cord.
• Do not handle the power cord/plug, battery, or cleaner with wet hands.
• Do not put any object into the openings or moving parts of the cleaner. Keep openings and moving parts free of dust, lint, hair, and anything that may cause the unit to not work properly.
• Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts of the cleaner.
• Turn all controls off before unplugging the cleaner or working with the battery.
• Use extra care when cleaning on stairs.
• Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Do not allow the end of the plug to whip when winding up the power cord/charging cord.
• Unplug the cleaner or cleaner battery before connecting attachments.
• Do not clean over anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not use without pads.
• Do not use on an over-saturated floor surface.
• If the supply cord is damaged, it must be replaced by the manufacturer or an authorized service center.
• This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instructions concerning its use.
• Children should be supervised to ensure they do not play with the appliance.
• Never use the appliance near flammable or explosive materials, outdoors, or stick objects into its openings or moving parts.
• Never touch the plug with wet hands.
• Always pull directly with the plug to disconnect the appliance from the outlet.
• Take care that the power cord is not bent, pinched, rolled over, or in contact with heat sources.
• Use only extension cords suited to the power requirements of the appliance.
• Never immerse the appliance in water or other liquids.
• Only operate the appliance if your outlet voltage is the same as that indicated on the appliance’s nameplate.
• If the power cord of this appliance is damaged, it must be replaced by the manufacturers.
• Never use a defective appliance or operate an appliance with a defective power cord.
• Never leave the appliance unattended and use it with special precaution if children or persons who cannot judge dangers are nearby.
• People who are unable to safely operate the appliance should only use it under supervision or instruction of a responsible person.
• Packing-materials are not toys and should be kept out of reach of children.

---

What should you not clean with the Prolux Mirage?

• Hair and other parts of the body.
• Toner dust (from laser printers, copying-machines, etc.).
• Hot ash, burning cigarettes, or matches.
• Pointed objects such as glass shards, nails, etc.
• Plaster, cement, and fine drilling-dust, makeup, etc.

---

How do you assemble the Prolux Mirage cleaner?

Always remove the power plug from the wall outlet or remove the battery before assembling or removing accessories.

---

How do you charge the battery pack?

1. Turn off the power switch.
2. Plug the small round connector on the charger’s cord end into the charging port of the buffer, located on the back of the unit above the water tank.
3. Plug the charger’s wall outlet cord end into your 120V wall outlet.
4. Allow approximately 2.5 hours for the battery pack to fully charge.
   • Note: The battery pack in the unit may get warm while charging.
5. Once charging, the L.E.D. Power Indicator light on the front of the unit should be Red, indicating that the battery is low and is currently charging. Once the light turns Green, the unit is fully charged and ready to be used.

---

What are the battery and charging safety precautions?

• Do not expose the battery pack to temperatures above 122°F (50°C). Never leave battery packs in automobiles on hot days.
• Do not use or store the unit or batteries in wet or moist conditions, or with flammable or combustible materials.
• Do not charge batteries or store batteries for extended periods, 1 month or more, in temperatures above 90°F (32°C) or below 40°F (5°C).
• When charging, ensure the charger has at least 6 inches of clearance on all sides for adequate airflow.
• Do not use a damaged cord or plug for charging.
• Do not pull on the charger’s cord to unplug. Grasp and pull the plug, not the cord.
• Do not handle the charger’s cord plug with wet hands when inserting it into an electrical outlet.
• Keep sparks and flames away from batteries. Do not smoke near batteries or the charger.
• Do not charge the unit outdoors.
• Do not attempt to repair, service, or modify the battery system or charger. Contact customer service with any issues.
• Do not short-circuit the battery or charger terminals with conductive items such as paper clips.
• Do not crush, drop, incinerate, or damage the battery pack. Do not use a battery pack that has been damaged in any way. Do not incinerate the battery even if it is severely damaged or non-working.
• Charge in a well-ventilated area. Do not block charger vents.

---

How do you use the cleaning pads?

To remove the cleaning pads/cloths from the buffer unit, simply peel the pad away from the Velcro surface of the buffer. To attach the pads/cloths, take the pad and press the Velcro side of the pad onto the Velcro surface of the buffer and apply firm pressure to ensure the Velcro surfaces are completely meshed together.

---

How do you fill the water/solution tank?

1. Remove the water tank from the back of the unit by grabbing the sides of the tank with one hand and pressing the release button right above the tank with the other hand. Then pull the tank away from the unit while you are holding in the release button.

2. Unscrew the lid of the water/solution tank and fill it with water and/or floor cleaner of your choice.

3. Reinsert the water tank into the unit by placing the bottom of the tank into the unit first, then pressing the top of the tank into the unit until you hear an audible (CLICK) sound ensuring the tank has been locked into the main unit.

4. Any time you use anything other than water in the solution tank, you will want to properly rinse the system clean after use. To do this, fill the tank about ¼ of the way full with water only. Turn the unit on, and press the solution spray button until the tank is completely drained.

   • When flushing the system clean, you can hold the sprayer nozzle over your sink to allow the clean water to spray into your sink to avoid a messy cleanup.

---

How do you use the Prolux Mirage floor buffer?

1. Switch the cleaner to either the “Scrubbing” setting to deep clean your floors, or the “Mopping” setting for polishing and mopping your floors.
2. Press the Spray button to spray the water/solution mixture from the spray nozzle located on the base of the unit, to treat the desired areas of your floor.
3. Once the desired area is properly saturated with water/solution, you will then run the unit over that area in a smooth slow back and forth motion, until the area is clean.

---

How do you clean the scrubbing pads?

When the cleaning pads become dirty, you can simply take them off the buffer and wash them by hand in your sink with warm water and a mild detergent for lightly soiled pads, or in your washing machine on a light-duty cycle with mild detergent for heavily soiled pads, and allow them to air dry. Do not place them in the dryer.

---

How do you clean the housing?

Clean the outside of the housing using only a slightly damp washcloth. Do not use Alcohol, cleaning, or scouring agents to clean your machine, as these may damage the appliance.

---

What do you do if the unit will not turn on?

• The battery is not charged.

  • Make sure the battery is fully charged by plugging the battery charger into the charging port, then plug the charger into your wall outlet and keep the charger plugged into the unit until the charger light turns Green.

• The battery is not connected into the unit properly.

  • Make sure the battery is plugged into the cleaner, making sure the wire connection from the battery to the cleaner is properly seated.

• Switch is in the “off” position.

  • Turn the on/off switch to either the “Scrubbing” OR “Mopping” position.

---

What do you do if the brush speed is low?

• The battery is not fully charged.

  • Make sure the battery is fully charged by plugging the battery charger into the charging port, then plug the charger into your wall outlet and keep the charger plugged into the unit until the charger light turns Green.

• The spinning brushes are dirty or debris is trapped in or around the brushes.

  • Remove the debris that is causing the slow brush speed, and clean the buffing pads if necessary.

---

What do you do if the water/solution will not spray out of the sprayer nozzle?

• The sprayer nozzle is clogged or the tank is empty.

  • Use a paperclip or toothpick to remove the blockage from the sprayer tip. Make sure the water tank is filled to the appropriate level.

---

What is covered under the Prolux Limited Warranty?

Prolux warranties this product’s motor free from defects in material and workmanship for a period of three (3) years on the motor, and two (2) years on the body of the cleaner, free from manufacturer defects in material and workmanship from the original date of purchase, when utilized for normal household use. 90 days on battery & charger.

---

What is not covered by the Prolux Warranty – Warranty Exclusions?

• Normal wear and tear and/or replacement attachments or accessories, including, without limitation, extension cords, hoses, filters, switches, carbon motor brushes, and other attachments to the cleaner.
• Damage or burnout of the cleaner’s body or Canister motor resulting from failure to clear a blockage occurring during the normal course of use.
• Loss or damage to the cleaner body or Canister resulting from conditions beyond the control of Prolux including without limitation, misuse, accidents, abuse, neglect, negligence from the customer, overuse beyond the capacity of the cleaner, or unauthorized modification and/or alteration.
• Loss or damage to the cleaner body or Canister resulting from failure to follow the required maintenance schedule or failure to use the cleaner in accordance with written instructions from Prolux, guidelines, or the terms of its Owner’s Manual.
• Non-durable parts including, without limitation, filters, accessories, brushes, belts, and electrical parts, which normally require replacement, are specifically excluded from warranty.
• Damage caused by shipping damage, misuse, abuse, negligent handling, or damage due to faulty packaging or mishandling in transit.
• Leaving the cleaner in too cold or too hot of an area, charging your battery over 24 hours, dropping your battery or cleaner, getting the battery or charger wet.

---

How do you register your Prolux product?

Follow the link below to register your Prolux product: http://www.proluxcleaners.com/webforms/index/index/id/2/?___store=default

---

How can you find more information or contact Prolux Customer Service?

Follow the link below: http://www.proluxcleaners.com You can also reach Prolux by phone at: (801) 382-7655