FREE ENGLISH PHILIPS MMS3160B (01) PDF USER GUIDE
FREE ENGLISH PHILIPS MMS3160B (01) PDF USER MANUAL
FREE ENGLISH PHILIPS MMS3160B (01) PDF OWNER GUIDE
FREE ENGLISH PHILIPS MMS3160B (01) PDF OWNER MANUAL
FREE ENGLISH PHILIPS MMS3160B (01) PDF REFERENCE GUIDE
FREE ENGLISH PHILIPS MMS3160B (01) PDF INSTRUCTION GUIDE
FREE ENGLISH PHILIPS MMS3160B (01) PDF REFERENCE MANUAL
FREE ENGLISH PHILIPS MMS3160B (01) PDF INSTRUCTION MANUAL
FREE ENGLISH PHILIPS MMS3160B (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD PHILIPS MMS3160B (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
PHILIPS MMS3160B (01) PDF SUMMARY:
What should I do to avoid damaging the loudspeaker cones?
Avoid sustained periods on high-volume use, and do not turn the volume to maximum level while using a high output signal, such as a Mobile Phone or DVD, etc., as this will cause distortion and may damage the loudspeaker cones.
What should I do when the speaker is not in use?
Switch off the system from the wall socket when not in use.
What should I avoid doing to prevent electrical shock or other accidents?
Do not open the cover or back panel because there are no user-serviceable parts inside.
Is the speaker system for indoor or outdoor use?
The speaker system is only for indoor use.
What should I do when plugging the system to the AC outlet?
Plug the system to the AC outlet with the right voltage marked on the back panel of the Subwoofer.
What is the MAINS plug used for?
The MAINS plug is used as the disconnect device, and it shall remain readily operable.
What should I avoid to keep the system in good condition?
Avoid high temperatures, moisture, water, and dust. The apparatus should not be exposed to dripping or splashing of liquid.
What should I not place on the Subwoofer?
Do not place any source of danger on the Subwoofer, such as liquid-filled objects or lighted candles.
Where should I not install the system?
Do not install near heat sources.
What should I make sure to not block?
Do not block any ventilation opening.
Where should I place the apparatus?
Place the apparatus in a location with adequate ventilation to prevent internal heat build-up. Allow at least 10cm (4 inches) of free space all around the apparatus for adequate ventilation.
What should I not touch when the system is at high volume?
At high volume, the back cover of the Subwoofer becomes hot, so do not touch it.
How should I clean the cabinet?
Use a soft cloth slightly moistened to clean the cabinet. Do not use a solution containing alcohol, spirits, ammonia, or abrasives.
What items should be included in the package?
The package should include a remote control, a user manual, an FM Antenna cable, and a 2RCA to 3.5mm stereo cable.
What should I pay attention to regarding battery disposal?
Attention should be drawn to the environmental aspects of battery disposal. Batteries should not be exposed to excessive heat, such as sunshine or fire.
How do I turn on the speaker?
Press the power button to turn on the speaker.
How do I put the speaker into stand-by mode?
Long press the power button to put the speaker into stand-by mode.
How do I use the play/pause function in USB/SD/BT mode?
Short press the power button for play/pause function in USB/SD/BT mode.
How do I change the input mode?
Press the SOURCE button to change the input mode. The options are: AU for Audio-in mode, Cd for CD mode, Ud for USB mode, Sd for SD mode, 88.3 for FM mode, and bt for Bluetooth mode.
How do I select the previous station?
Short press the TUNE- button to select the previous station which had been stored.
How do I search for radio stations?
Long press the TUNE- or TUNE+ buttons to semi-automatically search for radio stations.
How do I play the previous song in USB/SD/BT mode?
In USB/SD/BT mode, press the TUNE- button to play the previous song.
How do I select the next station?
Short press the TUNE+ button to select the next station which had been stored.
How do I play the next song in USB/SD/BT mode?
In USB/SD/BT mode, press the TUNE+ button to play the next song.
How do I adjust the volume?
Use the VOLUME+/- buttons to increase or decrease the volume.
How do I activate or deactivate mute using the remote control?
Press the “MUTE” button to activate or deactivate mute.
How do I select a song or track in USB using the remote control?
Use the numeric keys (0-9) to select a song or track in USB mode.
How do I key in a frequency in FM mode using the remote control?
Use the numeric keys to key in a frequency. For example, enter 927 for 92.7.
How do I select an input/source using the remote control?
Use the SOURCE button to select the input/source. The options are: AU for Audio-in, Cd for CD, Ud for USB, Sd for SD, 88.3 for FM, and bt for Bluetooth.
How do I adjust the bass using the remote control?
Use the BASS-/+ buttons to decrease or increase the bass.
How do I select an EQ mode using the remote control?
Use the EQ button to select a mode: Normal, Classic, Country, Pop, Jazz, or Rock. This only works in USB/SD/BT mode.
How do I increase the volume using the remote control?
Use the VOL+ button to increase the volume.
How do I play or pause songs using the remote control?
Short press the play/pause button to play or pause songs.
How do I automatically search and save channels in FM mode using the remote control?
Long press the play/pause button in FM mode to automatically search and save channels.
How do I manually store a station using the remote control?
Enter the frequency, then press the play/pause button. The station number will flash. Press the TUNE- or TUNE+ buttons to choose the serial, then press the play/pause button again to store the station.
How do I play the previous song using the remote control?
Press the previous song button in USB/BT mode.
How do I choose the previous channel using the remote control?
Press the previous channel button in FM mode.
How do I play the next song using the remote control?
Press the next song button in USB/BT mode.
How do I choose the next channel using the remote control?
Press the next channel button in FM mode.
How do I decrease the volume using the remote control?
Use the VOL- button to decrease the volume.
How do I search for a channel step-by-step using the remote control?
Each press of the TUNE- button will search the channel step-by-step (each step – 0.1 MHz). Press and hold TUNE- to search the previous channel, and it will stop and play once the previous channel has been found.
How do I search for the next channel step-by-step using the remote control?
Each press of the TUNE+ button will search the channel step-by-step (each step + 0.1 MHz). Press and hold TUNE+ to search the next channel.
Where is the best place to put the subwoofer?
The subwoofer is recommended to be put on the floor to get a better acoustic effect.
How do I position the speakers for best surround sound?
For the best possible surround sound, all the speakers (except the subwoofer) should be placed at the same distance from the listening position.
How should I position the front left and right speakers?
Place the front left and right speakers at equal distances from the TV and at an angle of approximately 45 degrees (horizontal) from the listening position.
Where should I place the center speaker?
Place the center speaker above the TV so that the center channel’s sound is localized.
Where should I place the surround speakers?
Place the surround speakers at normal listening ear level facing each other or mounted on the wall.
How do I avoid magnetic interference with the TV?
To avoid magnetic interference, do not position the speakers too close to the TV.
How do I get to Bluetooth mode?
Press the SOURCE key from the front panel or remote to go to Bluetooth.
What will happen when Bluetooth mode is selected?
When selected the Bluetooth mode, “bt” will start blinking on the display, and you will hear an audio tone, which indicates Bluetooth pairing mode.
How do I pair with a mobile phone or other Bluetooth device?
Search for the device named “Philips MMS3160B” and pair it. Once paired, “bt” stops blinking, and an audio tone will sound.
How do I disconnect the Bluetooth connection?
Press and hold the play/pause button for 3 seconds from the remote to force disconnect Bluetooth.
What happens if an external call comes in while using Bluetooth?
If an external call comes in while using Bluetooth, the speaker system goes into mute mode to protect the privacy of the mobile phone user. The operation resumes once the call is disconnected.
What should I do if there is no power?
Check if the AC power cord is properly inserted into the AC mains socket.
What should I do if there is no sound or distorted sound?
Adjust the volume or select the correct source to choose the equipment you want to hear through the system.
What should I do if the remote control does not function properly?
Reduce the distance between the remote control and the system, replace the batteries with new ones, point the remote control directly toward the IR sensor on the front panel of the subwoofer, or check that the batteries are inserted correctly.
What should I do if there is a low hum or buzz sound?
Place the product as far away as possible from electrical devices that may be causing interference, check the power supply voltage, or consult an electrician.
What should I do if the USB or SD drive cannot be read?
Take out the USB or SD drive and insert it again properly.
What should I do if the USB or SD operation is slow?
A large memory size USB or SD drive will take longer to read and play.
What should I do if the FM is not properly tuned?
Match with the local frequency.
What should I do if Bluetooth is not working?
Reduce the distance or ensure the device is paired.
What should I not do when attempting to repair the system?
Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty.
What is the warranty period for this system?
This Philips 3.1 multimedia speakers system is warranted against any defect due to defective materials or workmanship for 12 months from the date of purchase.
What does the warranty cover?
Gibson Innovations India Private Limited will repair the apparatus free of charge through the dealer from whom it has been purchased or at any of the Philips Authorized Service Centers.
When is the warranty not valid?
The warranty is not valid in the following cases: Proof of purchase is not accompanied with the warranty card, the warranty card is not completed immediately after purchase, the apparatus is not used according to this manual, defects are caused by improper or reckless use, any repairs are done by persons other than Philips Authorized service center, the serial number is tampered with, or defects due to causes beyond control like lightning, abnormal voltage, acts of God, or while in transit to the purchaser’s residence.
What is not covered under the warranty?
All consumables and parts susceptible to normal wear and tear are not covered under warranty.
CLICK HERE TO DOWNLOAD PHILIPS MMS3160B (01) PDF MANUAL
I can’t use my speaker. It has this bothering sound like the sound from a radio. The speaker was bought in Israel and shipped here in the Philippines. How can I fix the bothering sound?
You can try buying ferrite rings.