Free English PHILIPS DYNALITE DTK622-232 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD PHILIPS DYNALITE DTK622-232 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
Who must install the PHILIPS DYNALITE DTK622-232 Network Gateway?
The PHILIPS DYNALITE DTK622-232 Network Gateway devices must be installed by a qualified electrician in accordance with all national and local electrical and construction codes and regulations.
What are the electrical specifications for the power input of the PHILIPS DYNALITE DTK622-232?
The power input for the PHILIPS DYNALITE DTK622-232 is 12 V— and 20 mA.
What type of socket is used for the RS-232 connection on the PHILIPS DYNALITE DTK622-232?
The RS-232 connection on the PHILIPS DYNALITE DTK622-232 uses a DB9 Female socket.
What are the pin assignments for the RS-485 DyNet connection on the PHILIPS DYNALITE DTK622-232?
The pin assignments for the RS-485 DyNet (2 x RJ12) connection on the PHILIPS DYNALITE DTK622-232 are as follows:
1 – LOOP
2 – RX
3 – TX
4 – DTR
5 – GND
6 – LOOP
7 – NC
8 – NC
9 – LOOP
What is the operational temperature range for the PHILIPS DYNALITE DTK622-232?
The operational temperature range for the PHILIPS DYNALITE DTK622-232 is 0° C (32° F) to 40° C (104° F).
What is the required humidity range for the PHILIPS DYNALITE DTK622-232?
The required humidity range for the PHILIPS DYNALITE DTK622-232 is $\le$95%.
What is the IEC Overvoltage Category for the PHILIPS DYNALITE DTK622-232?
The IEC Overvoltage Category for the PHILIPS DYNALITE DTK622-232 is Category III.
What is the function of Pin 4 DTR on the DyNet/Auto switch for the PHILIPS DYNALITE DTK622-232 interface?
When set to DyNet, Pin 4 DTR (Data Terminal Ready) controls data flow between RS-232 and RS-485 ports for the PHILIPS DYNALITE DTK622-232.
What does the Auto setting on the DyNet/Auto switch do for the PHILIPS DYNALITE DTK622-232 interface?
When set to Auto on the DyNet/Auto switch for the PHILIPS DYNALITE DTK622-232, it emulates the DTR signal to control data flow when the RS-232 interface implementation does not use the DTR signal.
What is the required installation environment for the PHILIPS DYNALITE DTK622-232 regarding pollution degree?
The PHILIPS DYNALITE DTK622-232 requires installation in an environment meeting IEC Pollution Degree II requirements.
What is a potential consequence if the PHILIPS DYNALITE DTK622-232 is used in a domestic environment?
The PHILIPS DYNALITE DTK622-232 is a class A product. In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures.