MIO CYCLO 105 N411 (01) PDF Document

The buttons on your MIO CYCLO 105 N411 have the following functions:

1. POWER / LIGHT / BACK

• Press and hold for 2 seconds to turn your device on or off.

• When the device is on and in the DASHBOARD menu, press this button to switch the backlight on or off.

• While navigating through menus (except DASHBOARD), press to return to the previous screen.

2. MENU / ENTER

• In the DASHBOARD menu, press to switch between screens. Press and hold for 2 seconds to return to the Main menu.

• In a menu screen or option list, press to select the desired function or option.

3. UP / START / STOP

• Press to scroll up in a menu screen or option list.

• In the DASHBOARD menu, press to select CONTINUE, PAUSE, or STOP the timer during training.

4. DOWN / LAP

• Press to scroll down in a menu screen or option list.

• In the DASHBOARD menu, press to create a lap while the timer is counting for training.

Other connections include:

5. Bike mount socket: For the device mount.

6. Mini-USB connector: Connects to the charger or USB cable.

Your MIO CYCLO 105 N411 has an internal battery that should be charged for at least 3.5 hours before the first use. You can charge the battery in two ways:

Using a mains power socket:

Plug the home charger cable into the Mini-USB connector on the back of your device and plug the mains power charger into a power socket.

Via a computer:

Connect your device to a computer using the provided USB cable. For more details, see the section on connecting your device to a computer.

For optimal performance of the lithium battery in your MIO CYCLO 105 N411, follow these guidelines:

• Do not charge the battery in high temperatures, such as in direct sunlight. The battery stops charging if the ambient temperature is below -10°C (14°F) or above 60°C (140°F).

• Recharge the battery when it is nearly discharged and ensure it is fully charged. This can extend the battery life.

• If you do not plan to use the device for over a month, fully discharge the battery before recharging it. It is also recommended to fully discharge and recharge the battery once every 1 to 2 months.

• Failure to follow these instructions could cause damage to your device and battery and may void the warranty.

1. Mount the device and any accessories onto your bike.

2. Press and hold the POWER button for 2 seconds to turn on your device.

3. Follow the on-screen prompts to personalize your device. This includes:

• Selecting your preferred language.

• Choosing a coordinate format (degree or degree/minute/second).

• Selecting a units format (imperial or metric).

• Setting up the date, time, time zone, and daylight saving function.

• Setting up your user profile (gender, birthday, weight, height, workout level).

• Selecting your bike type (race, city, or mountain) and entering bike data (weight, wheel size – for selected models).

4. After turning on, the device will automatically search for satellite signals. When the GPS signal is fixed, the GPS icon will appear on the screen.

5. Depending on your model, you may need to scan and pair sensors like the heart rate monitor and cadence/speed sensor. Enable scanning from Main menu > SETTINGS > ACCESSORIES > SENSORS.

1. Turn on your computer.

2. Turn on your MIO CYCLO 105 N411.

3. Connect the mini-USB end of the USB cable to the back of your device and the other end to a USB port on your computer.

4. A “CONNECT TO PC?” message will appear on your device. Select your desired connection type:

• YES: Connects the device to the computer to transfer training data and upgrade the device (when available) via Mio Share.

• NO: Allows you to continue using your device while it charges via the computer.

1. The bike mount kit includes two types of rubber pads. Select the pad that best fits your bike’s handlebars.

2. Attach the selected rubber pad to the bike mount using the two plastic straps.

3. Align the latch on the back of the device with the slot on the bike mount.

4. Rotate the device clockwise to lock it securely onto the mount.

5. To remove the device, rotate it anticlockwise.

Follow these steps to install the cadence/speed sensor kit (for selected models):

1. Attach the main sensor unit to the chainstay of your bike using the provided ties.

2. Attach the spoke magnet to one of the spokes on your rear wheel. Ensure it aligns with the speed sensor arm (marked with an ‘S’). The gap should be 3-5mm.

3. Attach the crank magnet to the inside of your pedal crank. Ensure it aligns with the cadence sensor area on the main unit (marked with a ‘C’). The gap should be 3-5mm.

4. After installation, pair the sensor(s) with your device by navigating to Main menu > SETTINGS > ACCESSORIES > SENSORS. You can choose to pair SPEED, CADENCE, or both (SPEED/CADENCE).

The cadence sensor uses a replaceable CR2032 battery. To replace it:

1. Locate the battery cover on the back of the sensor.

2. Twist the cover anticlockwise (using a coin may help) to remove the cover and old battery.

3. Insert the new CR2032 battery into the battery chamber.

4. Replace the cover and twist it clockwise to close it securely.

To use the heart rate monitor (for selected models):

1. Before wearing, wet the contacts on the back of the chest strap with water. Using an electrolyte gel can also ensure good contact.

2. Adjust the elastic strap so it is snug but comfortable, allowing you to take a deep breath.

3. Wrap the strap around your lower chest, like a belt, and secure it on the other side with the buckle.

4. Once worn, pair the monitor with your MIO CYCLO 105 N411 by going to Main menu > SETTINGS > ACCESSORIES > SENSORS and selecting HEART RATE > SCAN.

The heart rate monitor uses a replaceable CR2032 battery. To replace it:

1. Locate the battery cover on the back of the monitor.

2. Twist the cover anticlockwise (using a coin may help) to remove it.

3. Insert the new CR2032 battery into the battery chamber.

4. Replace the cover and twist it clockwise to close it securely.

The Main menu on your MIO CYCLO 105 N411 provides quick access to the following functions:

• DASHBOARD: Displays various screens including date and time, compass (on selected models), and workout data.

• WORKOUT: Lets you set up and start workouts based on conditions like distance, time, or speed.

• HISTORY: Allows you to review past training data such as date/time, distance, speed, and altitude.

• SETTINGS: Provides options to customize system settings, user profiles, sensors, and more.

• TO PC: Allows you to transfer your training data from the device to a computer.

The DASHBOARD provides extended screens to assist you during your activities. The layout of these screens can be customized.

• To access the DASHBOARD screens, select Main menu > DASHBOARD.

• Press the ENTER button continuously to cycle through the different DASHBOARD screens.

• To return to the Main menu from the DASHBOARD, press and hold the ENTER button for 2 seconds.

You can customize which screens are displayed in the “PAGE SETTINGS” section of the SETTINGS menu.

To start a workout, select Main menu > WORKOUT. You can set workouts based on different conditions:

• DIST/TIME: Enter the DTG (distance to go) and TTG (time to go) settings, then select START.

• DIST/SPEED: Enter the DTG (distance to go) and SPEED settings, then select START.

• SPEED/TIME: Enter the TTG (time to go) and SPEED settings, then select START.

• MY RECORDS: Select a previous workout from the list and press ENTER to view its status. Select START to redo the workout and compete against your previous performance.

Once a workout starts, the device will analyze and report your status on the DASHBOARD screens.

1. Select Main menu > HISTORY.

2. Select LIST ALL to see all recorded trainings and workouts. The list will display the date, time, total distance, total calories, total time, and average/fastest records.

3. Select a specific workout from the list to view more options:

• TRACK: View the route of the training. Press ENTER again to see diagrams for speed, heart rate, or cadence.

• REPEAT: Track back to the start point (BACKWARD) or to the end point (FORWARD) of the route.

• LAPS: View the lap details on the map screen.

• DELETE: Delete the selected history data.

You can also select DELETE ALL from the main HISTORY screen to erase all saved data.

To access the customization options, select Main menu > SETTINGS. Use the UP/DOWN buttons to scroll through the menu items. Press ENTER to access a setting item and view its available options. Press BACK to return to the previous page.

You can customize system settings, sensor settings, user profiles, map settings, and more.

ACCESSORIES:

• SENSORS: Install your heart rate monitor or cadence/speed sensor kit, then select SCAN for the installed accessory to pair it with your device.

• CARDIO: Set up the heart rate alarm function. Select BY AGE or CUSTOM to define your heart rate zones based on HR MAX or Percentage.

ALERTS:

• TIME/DIST: Set an alarm to sound when a specific time or distance is reached. You can set it to sound ONCE or REPEAT.

• SPEED: Set an alarm to sound when your speed goes above or below a specified value.

• HEART RATE: Set an alarm to sound when your heart rate goes above or below your CUSTOM or HR ZONE setting.

• CADENCE: Set an alarm to sound when your cadence goes above or below a specified value.

• SETTINGS: Choose the alert method: MESSAGE/BEEPER or SYMBOL/BEEPER.

AUTO LAP:

Go to SETTINGS > AUTO LAP. In the TRIGGER field, select DISTANCE or BY TIME to have the device automatically record laps based on your selection. Otherwise, select OFF to disable this function.

AUTO PAUSE:

Go to SETTINGS > AUTO PAUSE. This function automatically pauses the timer when you stop moving. You can set it to activate WHEN STOPPED or when your speed falls below a CUSTOM SPEED value. This ensures more accurate average speed and calorie calculations.

COMPASS Calibration:

Go to SETTINGS > COMPASS.

• CALIBRATION: You must calibrate the electronic compass before use. Select CALIBRATION and follow the on-screen instruction to rotate the device 360 degrees. Keep the device away from magnetic fields during calibration.

• DECLINATION: To account for the difference between magnetic north and true north, you can manually input the declination value or set it to auto calibration (recommended).

• FOLLOW BEARING: This feature shows the angle between the top of the screen and a target point. It can be used without GPS to save power.

BAROMETER Calibration:

Go to SETTINGS > BAROMETER. To get an accurate altitude reading, calibrate the barometer before your training.

• AUTO (default): The system calibrates the sensor using the GPS signal when it is reliable.

• MANUAL: You can manually input the local Sea Level Pressure (S.L. PRESSURE) from an official weather source.

To restore your MIO CYCLO 105 N411 to its factory default status, go to SETTINGS > FACTORY RESET and confirm your choice. Warning: This action will erase all training data and your user profile.

GPS SETTING:

• WAAS/EGNOS: Enable or disable this function to improve GPS accuracy.

• GPS: Turn the GPS function on or off to save battery power.

• GPS INFO: Displays the positioning status, showing how many satellite signals are obtained and their strength.

MAP MODE:

• NORTH UP: Always displays North at the top of the Map screen.

• BIRD’S EYE VIEW: Displays an aerial image of the location from an angle of approximately 45 degrees.

MEMORY STATUS:

Displays how many data points are left and the remaining recording time available.

PAGE SETTINGS:

Customize the screens included in your DASHBOARD. You can turn ON or OFF up to 4 Custom pages, the Time screen, Map screen, Compass screen, and Lap screen. For Custom pages, you can also select the number of data fields displayed.

PROFILES:

• USER INFO: Input your personal data (NAME, GENDER, BIRTH DATE, WEIGHT, HEIGHT) for more accurate calculations. Select SAVE when done.

• BIKE INFO: Select your bike type (RACE, CITY, or MOUNTAIN) and set the bike weight and wheel size. These settings are used for cadence/speed sensors.

• WORKOUT: Select a training level based on your personal condition and exercise strength. You can also input extra weight you carry.

RECORDED DATA:

Set the time interval for recording data points.

• EVERY SECOND: Records one point every second for the most accurate record.

• CUSTOM TIME: Manually set the time interval. Recommended values are 1 second for walking/running and 2 seconds for cycling.

Navigate to SETTINGS > SYSTEM to configure the following:

• BEEPER: Enable the beeper for MESSAGE ONLY or for both KEY AND MESSAGE. Select OFF to disable it.

• TOD MODE: The device enters a time-of-day display mode after a period of standby. Set the standby time to 5 MINUTES, 10 MINUTES, or OFF.

• DISPLAY:

– BACKLIGHT: Set the backlight to turn off automatically after 15 SECONDS, 30 SECONDS, 1 MINUTE, 2 MINUTES, or set it to STAYS ON.

– Contrast: Adjust the screen contrast level.

– LANGUAGE: Select your preferred language.

– ORIENTATION: Set the screen orientation to PORTRAIT or LANDSCAPE.

– UNITS: Choose between IMPERIAL (FT, MPH) or METRIC (m, kph). You can also set the COORDINATE FORMAT to DEGREE or DEG MIN SEC.

• TIME:

– TIME FORMAT: Set the display to 12 HOUR or 24 HOUR.

– TIME ZONE: Select your local time zone.

– DAYLIGHT SAVING: Select the daylight saving option if necessary.

• ALARM: Set the alarm clock frequency (e.g., DAILY, WEEKDAY) and the alarm time.

• Keep the device away from excessive moisture and extreme temperatures.

• Avoid prolonged exposure to direct sunlight or strong UV light.

• Do not place anything on top of the device, drop it, or subject it to severe shock or sudden temperature changes.

• If moisture condensation occurs inside the unit, allow it to dry out completely before use.

• The screen can be scratched. Avoid touching it with sharp objects.

• When cleaning, use a soft, lint-free cloth to wipe the screen and exterior. Never clean it when it is turned on. Do not use paper towels.

• Do not attempt to disassemble, repair, or modify the device.

• Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as your device.

• Clean with a mild soap and water solution, then dry with a towel.

• Do not use alcohol or any abrasive materials for cleaning.

• Rinse the strap under running water.

• Do not expose accessories to extreme heat or direct sunlight for prolonged periods.

• Store the accessories in a cool and dry place.

• The estimated battery lifespan is 2 years. If an accessory stops working, replace the battery.

• Remove the battery from accessories before long-term storage.

About charging:

• Use only the charger supplied with your device. Using another type of charger may result in malfunction and/or danger.

• This product is intended to be supplied by a LISTED Power Unit marked with “LPS”, “Limited Power Source” and output rated +5 V dc / 1.0 A.

About the charger:

• Do not use the charger in a high moisture environment. Never touch it with wet hands or feet.

• Allow for adequate ventilation around the charger when in use. Do not cover it with paper or other objects, and do not use it inside a carrying case.

• Connect the charger to a proper power source.

• Do not use the charger if the cord becomes damaged.

About the battery:

• The unit contains a non-replaceable internal Lithium Ion battery. To reduce the risk of fire or burns, do not disassemble, crush, puncture, or dispose of it in fire or water.