MIDEA MHP171KMBPB (01) PDF Document

To operate the MIDEA MHP171KMBPB, follow these steps:

1. Power on the MIDEA MHP171KMBPB.

2. Adjust the knob to the proper gear.

3. Start cooking.

When using the MIDEA MHP171KMBPB, follow these safety precautions:

Read all instructions. Do not insert pins, wires, or other objects into the holes at the bottom of the product to avoid electric shock or injury. Do not use wet hands to plug or unplug the MIDEA MHP171KMBPB to avoid electric shock and injury. Do not use a damaged power cord or plug to avoid fire, electric shock, or short circuit. Close supervision is necessary when the appliance is used by or near children. After use, cut off the power and clean the internal and external dirt in a timely manner. Do not put the product into water or clean it with water to avoid damaging the insulation performance. During the work process, it is prohibited to move or shake the machine. Do not disassemble or repair the unit unless you are a maintenance technician. Do not forcefully bend the power cord, expose it to high temperatures, bundle it, or carry heavy objects on it. Do not place the product in an unstable, damp area, or near other sources of fire or heat. Do not immerse the cord, plugs, or the product in water or other liquid. Some surfaces may become hot during use, so do not touch them. Use handles or knobs. Do not use knives or metal utensils to cut food inside the baking tray. Do not use metal or rough objects to scrub and wipe the pot body, as this may damage the non-stick coating. Unplug from the outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts.

To clean and maintain the MIDEA MHP171KMBPB, follow these guidelines:

After each use, be sure to pull out the plug of the power cord, wait a few minutes after power off, and then wipe with a damp rag. If it is stored for a long time, it should be cleaned with detergent. Do not use abrasive cleaning products or solvents for cleaning. Do not wash the product base in water to avoid the risk of electric shock and functional failure. All parts should be dried before collection and then placed in a safe and dry place.

The MIDEA MHP171KMBPB has the following specifications:

Model: MHP171KMBPB

Rated Voltage: 120V~

Rated Frequency: 60Hz

Rated Power: 1600W

Capacity: 6.3Qt

If the work light of the MIDEA MHP171KMBPB does not work and the heat plate does not heat, check the following:

First, verify if the power is on. Check whether the switch, plug, socket, and power lead are in good condition, and that the plug and socket are inserted in place. If these are fine, the cause might be internal wires disconnected, a broken display light, a burnt-out electric heat pipe, or thermostat damage. In these cases, the MIDEA MHP171KMBPB should be sent to a designated service outlet for repair.

If the MIDEA MHP171KMBPB work lights are on but the heat plate does not heat, the reason may be that the electric heat pipe is damaged, the thermostat is damaged, or the internal cable is disconnected. The MIDEA MHP171KMBPB must be sent to a designated service outlet for repair.

If the MIDEA MHP171KMBPB cannot automatically limit temperature, it may be due to a damaged thermostat or a loose thermostat wire. The MIDEA MHP171KMBPB must be sent to a designated service outlet for repair.

For MIDEA MHP171KMBPB products with a reset hole on the back of the temperature control rod, if the product fails, press the button in the reset hole with an appropriate appliance. If the MIDEA MHP171KMBPB still does not work, please troubleshoot according to the self-test table provided in the manual.