Free English MIDEA MSHC30TW6BB (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD MIDEA MSHC30TW6BB (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the technical specifications for the MIDEA MSHC30TW6BB?
| Product Model | MIDEA MSHC30TW6BB |
| Voltage | 120V~ |
| Frequency | 60Hz |
| Rated Power | 1500W |
The rated power settings for this unit are as follows:
| Setting | Power Output |
| LOW | 600W |
| MEDIUM | 900W |
| HIGH | 1500W |
| LOW W/OSC | 600W |
| MEDIUM W/OSC | 900W |
| HIGH W/OSC | 1500W |
What should be checked before operating the MIDEA MSHC30TW6BB?
Check for any damage to the power cord.
Before connecting the heater to the power source, ensure the heater is positioned on a stable, flat, and even surface, clear of any obstacles.
The product uses a 120V AC power supply. Before use, please confirm if the rated current of the receptacle meets local requirements as a safe device; otherwise, please replace it with a qualified receptacle.
How do I use the control panel and display functions on the MIDEA MSHC30TW6BB?
| Button | Function Description |
| ON/OFF | Plug the unit into a 120V~ outlet and press this button to power the unit on. The heater will default to H3. |
| Mode | Repeatedly press to cycle through functions: C1 (Fan Only), ECO (ECO Mode), H3 (High Heat w/Fan), H2 (Medium Heat w/Fan), and H1 (Low Heat w/Fan). Press and hold for 3 seconds to mute or unmute. |
| Oscillation | Press to turn the oscillation function on or off. |
| Timer | Press to set a shutdown time (0 to 24 hours). Press again to extend the shutdown time. Press and hold to speed up the adjustment. |
| Temperature Adjustment | In ECO mode, press to set a temperature range from 41 to 83 degrees Fahrenheit. The default is 78 degrees Fahrenheit. Press and hold to speed up the adjustment. |
| Wireless Network Mode | When powered on, short press to turn on/off the WiFi function. Hold for 3 seconds to start wireless network connection settings. |
What do the display indicators signify on the MIDEA MSHC30TW6BB?
| Indicator | Function | Light Status |
| Numerical Display | Temperature/Timer/Mode Display | Solid White |
| ECO | Eco Mode Enabled | Solid White |
| WiFi Icon | WiFi Status | Flashing White (Connecting); Solid White (Connected); Flashing Amber (Enabled); Solid Amber (Standby) |
| Clock Icon | Timer Enabled | Solid White |
| Power Plug Icon | Power Status ON | Solid Red |
What are the additional safety and operational functions of the MIDEA MSHC30TW6BB?
Forced shutdown function: If the machine keeps running for 24 hours without any operation, it will automatically shut down.
Temperature sensor protection: The heater will display E1 or E2 error codes if the temperature sensor detects a short circuit or open circuit.
Safety protection: If the room temperature exceeds 122 degrees Fahrenheit, the heater will shut down all outputs and display an FF error code, flashing once per second for 75 times. You must unplug the unit and plug it back in to reset.
Tip-over switch: The heater will display a P4 error code if it is knocked over. Place the heater upright and power it back on to resume operation.
ECO energy saving function: In ECO mode, the heater adjusts its heating power by comparing the room temperature and the set temperature. The heater turns off automatically when the room temperature is 4 degrees Fahrenheit above the set temperature.
Child lock function: Press and hold the Mode and Timer buttons simultaneously for 3 seconds. The display will lock and show a bracket icon. Long press again to unlock. This function is only available via the control panel.
How do I operate the remote control for the MIDEA MSHC30TW6BB?
The remote control can be used in front of the product within a range of 15 feet.
Button 1: ON/OFF
Button 2: Mode selection
Button 3: Temperature Increase or Timer Setting Increase (+)
Button 4: Timer activation
Button 5: Oscillation control
Button 6: Temperature Decrease or Timer Setting Decrease (-)
Button 7: Enter ECO mode directly (…)
Battery Installation: Use two AAA 1.5V batteries. Do not mix old and new batteries or different battery types such as alkaline, standard, or rechargeable batteries.
How do I connect the MIDEA MSHC30TW6BB to the SmartHome application?
Step 1. Ensure your mobile phone is connected to a wireless network and that Bluetooth is enabled.
Step 2. Power on the heater.
Step 3. Open the SmartHome app on your phone and log in to your account.
Step 4. If a message regarding discovered devices appears, click to add. If no message appears, select the plus (+) icon and choose your device from the list of available nearby devices. If not listed, add the device manually by category and model.
Step 5. Connect the device to the wireless network according to the in-app instructions. Note that the heater only supports 2.4GHz WiFi networks.
Step 6. If there is no operation after connecting to the app for 24 hours, the WiFi will disconnect. Press the WiFi button on the heater to reconnect if it enters WiFi Standby mode.
What are the cleaning and maintenance guidelines for the MIDEA MSHC30TW6BB?
It is recommended that the heater be cleaned at least one time during the operating season.
Always turn the power switch off and unplug the heater before cleaning.
Turn the heater OFF, unplug it, and wait for the unit to cool down.
Use a dry cloth to clean only the external surfaces of the heater.
Do not use any cleaning agents or detergents.
Never immerse the heater in water.
Pack the heater in its original carton and store it in a cool, dry place for off-season storage.
How can I troubleshoot common issues with the MIDEA MSHC30TW6BB?
| Problem | Possible Cause | Solution |
| The machine does not work after the power is engaged. | The plug may not be properly inserted into the receptacle. | Check whether the plug is properly inserted into the receptacle. |
| The machine suddenly stops during heating. | The temperature exceeds the threshold of the thermal cut-off. | Make sure the appliance is powered off and unplugged. After the product has cooled, reinsert the plug into the receptacle and power on. |
CLICK HERE TO DOWNLOAD MIDEA MSHC30TW6BB (01) PDF DOCUMENT