MASTERPRO BGMP-9000 (01) PDF DOCUMENT

Before using the MASTERPRO BGMP-9000, the following basic precautions should always be followed:

1. Read all instructions first.

2. Before use, check that the voltage of your wall outlet corresponds to the rated voltage manner.

3. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Return the appliance to the nearest authorized service facility for examination, repair or electrical or mechanical adjustment.

4. To protect against the risk of electrical shock do not put in water or other liquid.

5. Do not let the cord hang over the edge of a table or counter or touch a hot surface.

6. To reduce the risk of electric shock, never operate this product with wet hands, spill liquid in the product or submerge it in water or any other liquid.

7. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.

8. Children should be supervised to ensure that they do not play with or touch the appliance.

9. Pay more attention to the running appliance; never leave the appliance unattended.

10. Do not place an appliance on or near a hot gas or on a heated oven.

11. Do not use outdoors, household use only.

12. Never operate the product when the cup is empty and do not remove the cup lid before the blades come to a complete stop.

13. Unplug from the outlet when not in use, before putting on or taking off parts, and before cleaning.

14. Avoid contacting moving parts.

15. Warning: misuse may cause serious injury.

16. Care is needed when handling cutting blades, especially when removing the blade from the bottle, emptying the bottle and during cleaning.

17. Keep hands and utensils out of the container while blending to reduce the risk of severe injury to persons or damage to the blender.

18. Blades are sharp. Handle carefully.

19. To reduce the risk of injury, never place cutter-assembly blades on the base without the jar properly attached.

20. Always operate the blender with the cover in place.

21. Always operate the appliance on a flat surface.

22. Never use any attachments which are not listed on the instruction book. The use of attachments, including canning jars, etc, not recommended by the manufacturer may cause a risk of injury to persons.

23. Do not blend hot liquids.

WARNING: The power plug can be inserted into a mains outlet socket Only after the Sport Bottle is securely installed on the Blender Base as per the below procedure; and before removing the Sport Bottle from the Blender Base, unplug the unit from the mains outlet socket.

1. Place the sport bottle on a flat surface and open the bottle.

2. Fill the bottle with your favorite ingredients. All ingredients must be filled below the bottle’s max level mark.

3. Fasten the blade base on the open end of the bottle.

4. Turn the bottle upside down, put the bottle and blade base together on the blender base, and ensure the three micro switch blocks are in the right position.

5. Press the pulse button to start the machine. During operation, your finger needs to press the button.

6. Do not operate the blender without loading.

7. If you want to stop the machine, please leave your finger from the pulse button.

8. After blending, turn the bottle over and place it on a flat surface, take out the blade base, and put the drinking lid on.

1. The MASTERPRO BGMP-9000 is only permitted to be used for 30 seconds continuously maximum. Before it’s used again, it must cool down enough.

2. The bottle and cap are dishwasher safe.

3. Use only for liquid like water, milk and soft fruits like Apple, banana, carrot, etc. Cut fruit first in pieces.

4. If making a cool drink, please ensure the ice cube is not larger than 2*2cm, and please put some liquid together with the ice. The ice weight is recommended to be no more than 90g at one time.

5. When overloaded, the motor will automatically stop. Please unplug, empty the cup, wait for 15 minutes for the motor to cool down, after which it can be used again.

1. Unplug the appliance from the wall outlet before cleaning.

2. After use, clean the main body with a wet towel and dry it with a dry towel. Absolutely keep it away from water or high humidity.

3. Wash the cup and blade part in running water.

4. Keep children away from the combined cup and blade.

5. Don’t clean it with “thinner” or “benzene” etc.

6. Keep it away from direct sunlight and damp places.

7. Never immerse the Base (Motor unit) or power cord into water for cleaning.

The symbol on the MASTERPRO BGMP-9000 or its packaging indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources.