Free English LOGITECH G321 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD LOGITECH G321 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I connect my LOGITECH G321 using LIGHTSPEED Wireless Technology?
To connect your LOGITECH G321, first insert the receiver into the USB port of your PC, Mac, PlayStation 5, or 4. Next, slide the power button up to power on the headset. Once connected, the LED will turn white.
How do I pair a new device via Bluetooth with my LOGITECH G321?
Step 1. Slide the power button up to turn the LOGITECH G321 on.
Step 2. Press and hold the Bluetooth button for 3 seconds to enter pairing mode.
Step 3. The LED will turn white and blink quickly to indicate it is ready to pair.
Step 4. Connect to your preferred device through your device settings.
Step 5. The LED will turn solid white when the LOGITECH G321 is successfully paired.
Note: The LOGITECH G321 can connect to a single Bluetooth device at a time.
How do I switch between LIGHTSPEED and Bluetooth connections on my LOGITECH G321?
Perform a single quick press on the Bluetooth button on your LOGITECH G321 to switch between the two connection types. The LED will be solid white when connected and will slowly blink when the headset is searching for a previously connected device.
How do I power on, power off, or mute the microphone on my LOGITECH G321?
To power on the LOGITECH G321, slide the power button up. To power off, slide the power button down. The headset will auto-shutoff after 30 minutes of inactivity. To mute the microphone, flip the microphone boom up. To unmute, flip the microphone boom down.
How can I check the battery level of my LOGITECH G321 when it is powered off?
With the LOGITECH G321 off, slide the power button up to turn the headset on. The LED indicator will provide the following status for 2 seconds:
31% to 100% battery: The LED will be solid white.
16% to 30% battery: The LED will be solid red.
Less than 15% battery: The LED will slowly blink red.
How does the LOGITECH G321 notify me about low battery levels when the headset is on?
When the LOGITECH G321 is powered on, it provides the following notifications:
If the battery drops below 30%, a sound notification will play and the LED will be solid red for 5 seconds.
If the battery drops below 15%, a sound notification will play and the LED will slowly blink red until the battery reaches 0% or the headset is connected to a charging cable.
CLICK HERE TO DOWNLOAD LOGITECH G321 (01) PDF DOCUMENT