Free English LOGITECH S-150 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD LOGITECH S-150 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What safety and cleaning procedures should be followed for the LOGITECH S-150?
1) Unplug the speakers from the computer before cleaning them with a dry cloth.
2) For added protection during lightning storms, unplug the speakers from the USB port and turn off the computer.
3) Servicing is required when the apparatus has been damaged in any way, such as when the power cord or plug has been damaged, liquid has been spilled on the apparatus or objects have fallen into it, or if the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
How do I set up the LOGITECH S-150 Digital USB speakers?
Step 1. Connect the USB cable located on the right speaker to an available USB port on your computer.
Step 2. Adjust the volume on your speakers. The Volume Up, Volume Down, and Mute functions will work with any audio software application.
Step 3. Use the Mute button to silence the speakers. To release Mute, press the Mute button again.
What are the control functions and indicators on the LOGITECH S-150?
The LOGITECH S-150 features the following controls and indicators:
1. Volume up button
2. Mute button
3. Volume down button
4. LED indicator
What troubleshooting steps should I take if my LOGITECH S-150 speakers produce weak or no sound?
If you are experiencing audio issues, perform the following checks:
Check the Power Light: Ensure the speakers are plugged into your computer’s USB port and verify that the power light is on.
Check Computer Recognition: Verify that the computer has recognized your speakers by opening your computer’s sound mixer program. In Windows, you can find this by opening “Sounds and Audio Devices” in your Control Panel. Ensure that “USB Audio Device” is selected in the hardware settings.
Check Mute Status: Determine if the speakers are muted. To release Mute, press the Mute button again.
What are the technical specifications for the LOGITECH S-150?
| Specification | Details |
|---|---|
| Total RMS Power | 1 Watt (0.5W + 0.5W) into 4 ohms at 1 kHz at 10% THD (total harmonic distortion) |
| System THD | Better than 10% THD before clipping |
| Signal to Noise Ratio | Greater than 100dB |
| Frequency Response | 20Hz to 20kHz |
| Driver Size | 2 inch driver |
CLICK HERE TO DOWNLOAD LOGITECH S-150 (01) PDF DOCUMENT