Free English FIELDMANN FZF 70605-0 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD FIELDMANN FZF 70605-0 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What is the FIELDMANN FZF 70605-0 intended for?
The FIELDMANN FZF 70605-0 is suited solely for the blowing of light and dry materials such as leaves, garden waste, grass, small branches, and small pieces of paper. It is intended for use on private properties only and is not intended for commercial use.
What are the technical specifications for the FIELDMANN FZF 70605-0?
The technical data for the FIELDMANN FZF 70605-0 is as follows:
Rated voltage: 20 V
RPM: 0-17000 min-1
Air speed max.: 38 m/s
Suction power (max. air flow): 350 CFM
Max. operating duration with a full battery: 15 min (2 Ah), 30 min (4 Ah)
Weight (without battery): 1.9 kg
How do I charge the battery for the FIELDMANN FZF 70605-0?
To charge the battery pack, press in the locking button and remove the battery from the FIELDMANN FZF 70605-0. Insert the battery pack into the charger and plug the charger into the power supply. The charging status is displayed by the control lights on the charger. The battery pack must be charged prior to the first start-up, with a charging time of around 60 minutes.
How do I check the remaining battery capacity on the FIELDMANN FZF 70605-0?
To check the capacity, press the battery capacity indicator switch button on the battery pack. The remaining capacity is displayed by the 4 LED control lights:
All 4 LEDs are lit: The battery is fully charged.
3 or 2 LEDs are lit: The battery has an adequate remaining charge.
1 LED blinks: The battery is empty, recharge the battery.
All LEDs blink: The battery pack is too hot or too cold. Ensure the battery temperature is between 40°F (4°C) and 104°F (40°C).
How do I connect the blow tube to the FIELDMANN FZF 70605-0?
Line up the slot on the inside of the blower tube with the tap of the housing opening and push the tube onto the unit. Ensure the installation is firm and clicks into place.
How do I switch the FIELDMANN FZF 70605-0 on and off?
To switch the FIELDMANN FZF 70605-0 on, turn the variable speed dial to settings 1, 2, 3, 4, or MAX to turn on the unit and increase air speed. To switch the machine off, turn the variable speed dial to 0.
How do I clean and maintain the FIELDMANN FZF 70605-0?
Before any maintenance or cleaning work, remove the battery and let the device cool down. You can dismantle the blower tube by pressing the release button. Remove any coarse dirt from the machine and wipe the appliance with a slightly damp cloth.
What should I do if my FIELDMANN FZF 70605-0 does not work?
Please check the following if the device does not work:
If the battery is not slotted in correctly, slot the battery into place.
If the battery pack is discharged, charge the battery pack.
If the battery pack or the device is defective, contact your nearest service point.
What are the safety guidelines for operating the FIELDMANN FZF 70605-0?
When working with the FIELDMANN FZF 70605-0, always maintain a safe distance and a natural body position. Ensure no other persons or animals are present within 5 meters of the working area. Never operate the blower in the rain. Do not blow heavy materials such as metal, stones, branches, or broken glass. Always wear required personal protective equipment, including eye and ear protection.
CLICK HERE TO DOWNLOAD FIELDMANN FZF 70605-0 (01) PDF DOCUMENT