Free English LOGITECH ZONE WIRED 2 (02) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD LOGITECH ZONE WIRED 2 (02) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I connect my LOGITECH ZONE WIRED 2 to a computer?
Plug the USB-C connector into the computer USB-C port. Or use the provided USB-A adapter to plug the LOGITECH ZONE WIRED 2 into the computer USB-A port. Note that you should only use the USB-A adapter with the provided headset.
How do I adjust the fit of my LOGITECH ZONE WIRED 2?
You can adjust the LOGITECH ZONE WIRED 2 by sliding the earcups up and down the headband. You can also swivel the earcups to fit on your ear. It may be easier to adjust the headset while it is on your head by moving the earcups up and down until they sit comfortably on your ears.
How should the microphone boom be positioned on the LOGITECH ZONE WIRED 2?
The microphone boom on the LOGITECH ZONE WIRED 2 rotates 270 degrees and can be worn on either the left or right side. It should be placed close or next to your mouth, aligned with the corner of the mouth.
What are the call control functions for the LOGITECH ZONE WIRED 2?
For call controls on the LOGITECH ZONE WIRED 2, a short press answers or ends a call, and a 2 seconds press rejects a call.
What are the media control functions for the LOGITECH ZONE WIRED 2?
When enabled with the software, the media controls on the LOGITECH ZONE WIRED 2 are as follows: a short press plays or pauses audio, a double press goes to the next track, and a triple press goes to the previous track.
How do I control volume on the LOGITECH ZONE WIRED 2?
To increase the volume on the LOGITECH ZONE WIRED 2, use a short press on the “+” button. To decrease the volume, use a short press on the “-” button.
How do I use the ANC controls on the LOGITECH ZONE WIRED 2?
You can toggle between ANC and Transparency mode on the LOGITECH ZONE WIRED 2 with a short press of the ANC button. A 2 seconds press will turn ANC off.
How do I mute and unmute the microphone on the LOGITECH ZONE WIRED 2?
To mute the microphone on the LOGITECH ZONE WIRED 2, flip the mic boom up. To unmute, flip the mic boom down.
What do the connector light indicator statuses mean for the LOGITECH ZONE WIRED 2?
The connector light indicator on the LOGITECH ZONE WIRED 2 uses the following patterns:
A solid white light indicates an ongoing call.
A flashing white light indicates an incoming call.
A solid red light indicates the microphone is muted.
A blinking purple and white light indicates the headset firmware is updating.
How do I adjust sidetone on the LOGITECH ZONE WIRED 2?
Sidetone on the LOGITECH ZONE WIRED 2 allows you to hear your own voice while speaking. Using the software, you can select the sidetone feature and adjust the setting while speaking. A higher number increases external sound heard, while a lower number decreases it.
What is the Power Saving Mode on the LOGITECH ZONE WIRED 2?
Power Saving Mode on the LOGITECH ZONE WIRED 2 lowers power usage from the connected device. When enabled, the headset will automatically turn off Active Noise Cancellation and the light indicator after 30 minutes of inactivity. To wake the headset, start using it by joining a call, listening to music, or pressing any button.
CLICK HERE TO DOWNLOAD LOGITECH ZONE WIRED 2 (02) PDF DOCUMENT