FREE ENGLISH LINEA DOMO DO436BL (01) PDF USER GUIDE
FREE ENGLISH LINEA DOMO DO436BL (01) PDF USER MANUAL
FREE ENGLISH LINEA DOMO DO436BL (01) PDF OWNER GUIDE
FREE ENGLISH LINEA DOMO DO436BL (01) PDF OWNER MANUAL
FREE ENGLISH LINEA DOMO DO436BL (01) PDF REFERENCE GUIDE
FREE ENGLISH LINEA DOMO DO436BL (01) PDF INSTRUCTION GUIDE
FREE ENGLISH LINEA DOMO DO436BL (01) PDF REFERENCE MANUAL
FREE ENGLISH LINEA DOMO DO436BL (01) PDF INSTRUCTION MANUAL
FREE ENGLISH LINEA DOMO DO436BL (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD LINEA DOMO DO436BL (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
LINEA DOMO DO436BL (01) PDF SUMMARY:
What is this appliance suitable for?
This appliance is suitable to be used in a household environment and in similar surroundings such as:
- Kitchen for personnel of shops, offices or other similar professional surroundings
- Farms
- Hotel or motel rooms and other surroundings with a residential character
- Guest rooms or similar
What should I read before using the appliance?
Read the instruction manual carefully before using the appliance and follow the different steps that are described in it. Also take the following safety measures into account.
What should I do before using the appliance?
- Read the instructions before using the appliance and save the instruction manual.
- Connect the appliance to an earthed socket. The voltage stated on the label on the bottom of the appliance has to correspond with the voltage of the power grid.
To reduce the risk of electric shock, what should I never do?
Never immerse the cord, the plug, or the base with the engine in water or other liquids.
What should I not allow the cord to do?
Do not let the cord hang over the corner of a table or the counter top or do not let it touch hot surfaces.
When should I provide close supervision?
If the blender is used near or by children, close supervision is necessary.
What should I be careful of?
The blades are sharp, be careful with them.
When should I not place the blade assembly in the base?
Never place the blade assembly in the base if the blending bottle is not properly attached to it.
What should I not attempt to do?
Do not attempt to bypass the interlock system that powers the unit.
When should I not use the blender?
Do not use the blender when the cord or the plug is damaged or after the appliance has malfunctioned, has been dropped, or has been damaged in any way. In that case, return the appliance to a service center for examination, repair, or electrical mechanical adjustment.
Where should I always use the blender?
Always use the blender on a flat surface.
Where should I not use the blender?
Do not use the blender outdoors or for commercial purposes. This appliance is intended for household use only.
When should I pull the plug out of the socket?
Always pull the plug out of the socket when you are not using the blender, when you take off or put on parts, and before you clean the appliance.
What can the blender be used for?
For blending fruit, vegetables, ice etc. into beverages.
What are the features of the bottle?
BPA free drinking bottle of 600 ml and a smaller one of 300 ml in Tritan: reusable, dishwasher safe, durable and tasteless. The bottle does not absorb any tastes nor smells.
What are other features of the blender?
- Easy to carry and adjusted to cup holders in cars
- Spill-proof, reclosable drinking lid
- Just one button to blend
- Antiskid feet
- Safety system at start-up
- Overheat protection
What should I do before using the blender?
- Cut all solid vegetables and fruit into pieces no larger than 2,5cm.
- Do not use the blender for making dough, puree, for grinding meat, etc.
- Do not use the blender to blend warm fluids or other warm ingredients. The blender is only suited for blending cold ingredients. Also, do not put the blender or the blender bottle into the microwave oven. Do not use them to heat up something.
- The blender can also crush ice. However, always add enough liquid when crushing ice.
- The blender has a built-in safety at the start-up. The blending bottle has to be placed correctly into the base before you can start the blender.
- Do not overload the blending bottle. If the engine sputters, switch off the blender immediately, pull the plug from the socket and let the appliance cool down for at least 10 minutes.
- Clean the blender according to the instructions in the ‘Cleaning and maintenance’ section.
What is step 1 for using the blender?
Fill the bottle with your favorite ingredients. Make sure that the ingredients do not exceed the 600 ml indication on the bottle, or the 300 ml indication in case of the smaller bottle.
What is step 2 for using the blender?
Carefully grab the blade assembly by the bottom of the piece, the blades turned away from you, and secure it on the opening of the blending bottle by screwing it on.
What is step 3 for using the blender?
Place the blender base on a flat surface and plug it in.
What is step 4 for using the blender?
Turn the bottle, with the blade assembly attached to it, upside down, line up the arrow ▲ on the bottle with the arrow ▲ on the base and push the bottle into the base. Turn the bottle clockwise to lock it into the base.
What is step 5 for using the blender?
Push the button to start blending. The indication light will light up. Release the button to stop blending.
What is step 6 for using the blender?
Stop the blender when everything is mixed properly. Turn the bottle counterclockwise and take the bottle from the base.
What is step 7 for using the blender?
Turn the bottle upside down, remove the blade assembly from the bottle and screw the drinking lid on to the bottle. This way you can take the bottle with you as a drinking bottle.
What should I pay attention to when cleaning and maintaining the blender?
The edges of the blades are very sharp. Cleaning the blender has to be done carefully.
What is step 1 for cleaning and maintaining the blender?
Pull the plug from the socket and disassemble the accessories before cleaning the appliance.
What is step 2 for cleaning and maintaining the blender?
Use a damp cloth to clean the outside of the blender base. Never immerse the blender base in water or other liquids.
What is step 3 for cleaning and maintaining the blender?
Except for the base, you can clean all parts in water: the drinking lid, the blending bottle and the blade assembly.
What is step 4 for cleaning and maintaining the blender?
When not using the blender for a longer period of time, save it in a well ventilated, dry place to prevent the engine of the appliance from being affected by humidity.
CLICK HERE TO DOWNLOAD LINEA DOMO DO436BL (01) PDF MANUAL