Free English LENOVO LEGION 27Q-11 (02) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD LENOVO LEGION 27Q-11 (02) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What safety precautions must be followed to avoid electrical shock when using the LENOVO LEGION 27Q-11?
To avoid shock hazards, observe the following safety instructions:
Do not remove the covers of the monitor.
Do not operate this product unless the stand is attached.
Do not connect or disconnect this product during an electrical storm.
The power cord plug must be connected to a properly wired and grounded power outlet.
Any equipment to which the monitor will be attached must also be connected to properly wired and grounded power outlets.
To isolate the monitor from the electrical supply, you must remove the plug from the power outlet. The power outlet should be easily accessible.
How should the LENOVO LEGION 27Q-11 be handled and moved safely?
If the LENOVO LEGION 27Q-11 weighs more than 18 kg (39.68 lb), it is recommended that it be moved or lifted by two people. When positioning or moving the monitor, ensure the tilt angle does not exceed 5 degrees to prevent instability or damage.
What are the stand adjustment capabilities for the LENOVO LEGION 27Q-11?
The monitor stand provides multiple adjustment options for ergonomic viewing:
Height Adjustment: The monitor can be moved vertically within a range of 135mm.
Tilt: The screen can be tilted forward -5 degrees or backward 22 degrees.
Pivot: The monitor can be rotated 90 degrees clockwise or counter-clockwise to switch between landscape and portrait orientations.
Swivel: The screen can be swiveled 30 degrees to the left or 30 degrees to the right.
How do I connect external devices to the LENOVO LEGION 27Q-11?
The LENOVO LEGION 27Q-11 supports several connection types:
HDMI: Connect an HDMI cable to either the HDMI 1 or HDMI 2 ports on the rear of the monitor and the other end to your source device.
DisplayPort (DP): Connect a DP cable to the DisplayPort input on the monitor and the corresponding port on your computer.
Audio: Plug headphones or external speakers into the 3.5mm audio output jack located on the back of the monitor next to the video ports.
Kensington Lock: A security slot is provided on the back for physical theft prevention.
What recommendations are provided for vision health while using the LENOVO LEGION 27Q-11?
To protect your eyesight while using the monitor, follow these guidelines:
Rest for 10 minutes after every 30 minutes of continuous use.
Children under 2 years of age should not watch the screen.
For children 2 years of age and older, screen time should be limited to no more than 1 hour per day.
What hazardous substances are contained in the LENOVO LEGION 27Q-11 components?
The following table identifies the hazardous substances present in various components of the LENOVO LEGION 27Q-11. An “O” indicates the substance is below the limit requirement, while an “X” indicates it is above the limit requirement for that specific part due to functional needs.
| Component Name | Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent Chromium (Cr(VI)) | Polybrominated biphenyls (PBBs) | Polybrominated diphenyl ethers (PBDEs) | DEHP | BBP | DBP | DIBP |
|---|---|---|---|---|---|---|---|---|---|---|
| LCD Panel/OLED Panel/Lamp | X | O | O | O | O | O | O | O | O | O |
| Circuit Board Assembly | X | O | O | O | O | O | O | O | O | O |
| Metal Parts | X | O | O | O | O | O | O | O | O | O |
| Accessories | X | O | O | O | O | O | O | O | O | O |
| Power Cord/Connection Cable | X | O | O | O | O | O | O | O | O | O |
How do I assemble the LENOVO LEGION 27Q-11 monitor stand?
Follow these steps to assemble the stand:
Step 1: Open the box and remove the stand base, stand neck, and monitor.
Step 2: Attach the stand neck to the stand base by aligning the connectors and tightening the integrated thumb screws at the bottom of the base.
Step 3: Align the stand neck with the mounting slot on the back of the monitor and click it into place.
Step 4: Place the monitor upright on a flat surface. You can use the cable management clip on the stand neck to tidy your power and signal cables.
CLICK HERE TO DOWNLOAD LENOVO LEGION 27Q-11 (02) PDF DOCUMENT