LENOVO LEGION PRO 5 16IRX10 (01) PDF DOCUMENT

The front of the LENOVO LEGION PRO 5 16IRX10 includes the following components:

1. Microphones: These are the PC’s built-in sound input devices that capture your voice and ambient sound.

2. Camera: The built-in camera captures visible light for video recordings and video conferencing.

3. Camera light: This light indicates whether the camera is activated.

4. Screen: This is the built-in display where text, graphics, and videos are shown.

The camera light on your LENOVO LEGION PRO 5 16IRX10 indicates the activation status of the camera as described in the table below.

The base of the LENOVO LEGION PRO 5 16IRX10 includes the following components:

1. Power button: Press this button to turn on your PC. By default, pressing it when the PC is on will put it into sleep mode.

2. Power light: This light indicates the current power state and active operation mode of the PC.

3. Keyboard: The primary input device for typing characters, which also includes shortcut keys.

4. Touchpad: The built-in pointing device that provides the functionality of an external mouse.

5. Antennas: These transmit and receive radio waves for Wi-Fi and Bluetooth connections. The antennas are hidden inside the PC.

The power light on your LENOVO LEGION PRO 5 16IRX10 indicates the PC’s power state and active operation mode.

Power Light Status and Power State

Power Light Colors and Active Operation Modes

The left side of the LENOVO LEGION PRO 5 16IRX10 features the following:

1. Charging light: Indicates the battery charging status.

2. Power connector: Use this connector with the included ac power adapter to connect your PC to an electrical outlet.

3. HDMI™ connector: Used to connect an external display device.

4. Multi-purpose USB Type-C® connectors: Used for data transfer, connecting display devices, and for some models, connecting a USB Power Delivery-compliant charger or a Thunderbolt™-enabled device.

5. USB Standard-A connector (always-on connector): A USB connector that can supply power to a connected device even when the PC is off. This function can be managed in the firmware setup utility or Lenovo Vantage.

The charging light on your LENOVO LEGION PRO 5 16IRX10 indicates the battery charge level when the PC is plugged into an electrical outlet.

The right side of the LENOVO LEGION PRO 5 16IRX10 features the following:

1. Combo audio jack: Used to connect single-plug headsets, headphones, or external speakers.

2. USB Standard-A connectors: Used to connect storage or peripheral devices.

3. Camera switch: A toggle switch to enable or disable the built-in camera for privacy protection.

4. Ethernet connector: Connects a cable modem or router for wired Internet access.

Bottom View:

1. Air vents (intake): These vents allow air to be sucked into the PC to cool internal components.

2. Speakers: The PC’s built-in sound output devices.

Rear View:

1. Air vents (outlet): These vents allow hot air to be discharged out of the PC.

Important: When the PC is operating, do not place it on a bed, sofa, carpet, or other flexible surfaces. Otherwise, the air vents will be blocked and the PC may overheat, reducing performance or causing the PC to be unresponsive or even shut down.

The following are the specifications for the LENOVO LEGION PRO 5 16IRX10.

Dimensions

ac power adapter

Battery pack

Memory

Mass storage device

Screen

Connectors and slots

Security

Network

Depending on many factors such as the processing capability of the host and peripheral devices, file attributes, and other factors related to system configuration and operating environments, the actual transfer rate using the various USB connectors on this device will vary and will be slower than the data rate listed below for each corresponding device.

Maximum altitude (without pressurization)

3048 m (10 000 ft)

Temperature

At altitudes up to 2438 m (8000 ft):

Operating: 5°C to 35°C (41°F to 95°F)

Storage: 5°C to 43°C (41°F to 109°F)

At altitudes above 2438 m (8000 ft):

Maximum temperature when operating under the unpressurized condition: 31.3°C (88°F)

Note: When you charge the battery, its temperature must be no lower than 10°C (50°F).

Relative humidity

Operating: 8% to 95% at wet-bulb temperature 23°C (73°F)

Storage: 5% to 95% at wet-bulb temperature 27°C (81°F)

CAUTION: Avoid constant body contact with specific hot sections

When the computer is operating, it should be placed on a hard and flat surface with its bottom area not in contact with user’s bare skin. Under normal operating conditions, the temperature of the bottom surface will remain within an acceptable range as defined in IEC 62368-1, but such temperatures can still be high enough to cause discomfort or harm to the user if directly touched for over 10s at a time. As such, it is recommended that users avoid prolonged direct contact with the bottom of the computer.

When you turn on your LENOVO LEGION PRO 5 16IRX10 for the first time, the Windows operating system will guide you through the initial setup process. Most importantly, you will:

• Create a user account

• Connect to a wireless network that has Internet access

• Select language-related settings

Note: If you choose to set up Windows for personal use, you must either use an existing Microsoft account or create a new one. You can switch to a local account after the initial setup.

Windows provides several recovery options to help restore your system to normal functionality. The table below will help you choose the right option for different situations.

Resetting Windows allows you to reinstall the operating system while retaining your personal files. This gives the operating system a fresh start and, in some cases, restores the PC’s original performance.

Step 1. Select Settings → System → Recovery.

Step 2. Under recovery options, select Reset PC. When prompted, choose between Keep my files and Remove everything.

Step 3. Follow the on-screen instructions to complete the reset process.

Create a recovery drive

It is advisable to create a recovery drive after completing the initial setup of Windows. If you encounter a significant issue that prevents Windows from starting, you can use the recovery drive to restore the operating system on your PC.

Step 1. Prepare an empty USB drive with a storage capacity of 32 GB or more.

Step 2. In the search box on the taskbar, type Create a recovery drive and select the matched app.

Step 3. Make sure Back up system files to the recovery drive checkbox is selected and select Next.

Step 4. When prompted, connect the USB drive to your PC, select it, and then select Next.

Step 5. Select Create.

Restore Windows using a recovery drive

If the Windows operating system fails to start, you can use a previously created recovery drive to restore Windows onto your PC.

Step 1. Shut down your PC.

Step 2. Connect the recovery drive to your PC.

Step 3. Press the Novo button or the Lenovo Smart Key to open the Novo button menu.

Step 4. Select Boot Menu.

Step 5. Select the USB drive as the boot device. The PC will start to the Windows Recovery Environment.

Step 6. Follow the on-screen instructions to restore Windows onto your PC.

You can use the power management features in Windows to use your PC in an energy-efficient manner.

Shut down your PC

When you have finished using your PC and do not plan to resume shortly, shut it down.

Step 1. Select Start → Power.

Step 2. Select Shut down.

Put your PC into sleep mode

If you need to stop using your PC but plan to resume shortly, you can put it into sleep mode. Your PC will wake up more quickly from sleep mode.

Step 1. Select Start → Power.

Step 2. Select Sleep.

Note: To wake the PC from sleep mode, press the power button or any key on the keyboard.

Adjust timeout settings for saving power

Step 1. Select Start → Settings → System → Power & battery → Screen, sleep, & hibernation timeouts.

Step 2. Adjust the settings. For notebook PCs, you can set distinct timeouts for two usage scenarios: when the PC is plugged in and when it is running on battery power.

The default timeout settings are as follows:

Establish a wired connection

Step 1. Plug an Ethernet cable into the Ethernet connector on your computer.

Step 2. Plug the other end of the Ethernet cable into a network wall jack or a router.

Connect to a Wi-Fi network

Ensure that you have a secure Wi-Fi network account and the required credentials.

Step 1. Select the network icon on the bottom right of your display.

Step 2. Select an available network, and then select Connect. If you want to be automatically connected to this Wi-Fi network the next time you start your computer, select Connect automatically before selecting Connect.

Step 3. Input your credentials if necessary, and then follow the on-screen instructions to connect to the desired Wi-Fi network.

Lenovo Vantage

Lenovo Vantage is a one-stop solution to help you update your computer, configure hardware settings, and access personalized support. Type Vantage in the Windows search box to launch this app.

Smart Connect

Smart Connect is an app that can easily pair your PC with your Motorola smartphone and Lenovo tablet. With Smart Connect, you can:

• Access mobile apps on your PC

• Quickly share content between connected devices

• Mirror your phone display or create a virtual phone screen on your PC

• Copy and paste across connected devices

• Use your phone or tablet camera as the PC webcam

• Control your phone or tablet using your PC keyboard and mouse

• Extend or mirror your PC display on the tablet

Lenovo AI Now

Lenovo AI Now is your personal and private AI assistant. It enables you to boost your productivity by building your personal knowledge library, helps you with inspiration, writing and summarizing, and provides troubleshooting and quick settings for your PC. To open, type Lenovo AI Now in the Windows search box or press the hotkey marked with a star icon.

Legion Space

Legion Space is an app developed specifically to help you access game resources, adjust the performance, change light effects, and manage devices and peripherals. To access the app, type Legion Space in the Windows search box or find it on the taskbar.

The Novo Button menu can be displayed before the operating system starts. From the menu, you can choose to:

• Open the UEFI/BIOS setup utility

• Open the boot device selection menu

• Open the Windows startup options screen

Open the Novo Button menu

For Lenovo computers with a Novo button, you can press the button to open the Novo Button menu.

Step 1. Turn off the computer.

Step 2. Open the LCD screen and press the Novo button.

Note: Alternatively, turn on or restart the computer, press F9 repeatedly to open the Novo Button menu.

Hotkeys on your LENOVO LEGION PRO 5 16IRX10 provide quick access to frequently used settings and applications. The fn lock (fn + esc) is an electronic switch that affects how you use hotkey functions.

A Lenovo keyboard usually contains hotkeys in the top row. These hotkeys share keys with the function keys (F1-F12) and other keys. For these dual-function keys, the icons or characters denoting the primary functions are printed on top of the icons and characters denoting the secondary functions.

The fn lock (fn + esc) changes how these dual-function keys work.

The fn key can be used in combination with specific keys to adjust device settings or activate additional functions.

The Windows logo key can be used alone or in combination with specific keys to quickly change settings and access utilities.

The Windows operating system supports multi-finger gestures on the touchpad of your LENOVO LEGION PRO 5 16IRX10.

Modify the default functions for touchpad gestures

Step 1. Select Settings → Bluetooth & devices → Touchpad.

Step 2. Under Three-finger gestures, use the drop-down lists to modify the functions for the swipe or tap gestures.

Connect to a wired display

Step 1. Connect one end of the display cable to the HDMI connector or a multi-purpose USB Type-C connector on your computer.

Step 2. Connect the other end of the cable to the display.

Connect to a wireless display

Ensure that:

• Both your computer and the display support Miracast® technology.

• The display is connected to the same Wi-Fi network as your computer and is discoverable.

Step 1. Press Windows key + K. The computer searches for wireless display devices and audio devices and lists the results.

Step 2. Select the display you want to connect to, and then follow the on-screen instructions.

Change display settings

Step 1. Right-click on a blank area on the desktop, and then select Display settings. Your computer shows the Display window.

Step 2. Select the display for which you want to change the settings.

Step 3. Change the display settings as necessary.

Set the display mode

Step 1. Press the display key or fn + display key. Your computer shows a list of display modes, with the current mode highlighted.

Step 2. Select a display mode from the list.

The camera switch is a mechanical button that prevents any attempt from capturing your image, thus protecting your privacy. To disable the camera, slide the camera switch to the direction with the camera-off icon. When you want to use the camera again, slide the camera switch to the other direction.

If you slide the camera switch to the off position during a video call, people on the video call will not be able to see you. If you slide the camera switch back to the opposite position, they will be able to see you again.

Note: After you slide the camera switch, a camera-on or camera-off icon is displayed on the screen to indicate that the setting is successful.

Turn on night light

The night light feature in Windows 11 enables users to switch to warmer color tones, reducing blue light emission to alleviate eye strain or fatigue.

Step 1. Open the quick settings menu by selecting the network, sound, or battery icons on the far right of the taskbar or by using the keyboard shortcut Windows key + A.

Step 2. Select the button for night light to turn it on or off.

Adjust color temperature

If Windows 11 night light mode is turned on, you can adjust the color temperature of the screen.

Step 1. Select Start → Settings.

Step 2. Select System → Display → Night light settings.

Step 3. Move the slider to adjust the color temperature.

Note: Selected Lenovo PCs are low blue-light certified. These PCs undergo testing with the night light turned on and the color temperature value set at 48 or above.

Your LENOVO LEGION PRO 5 16IRX10 may come with the following intelligent features, which can be enabled or disabled in Lenovo Vantage or Lenovo PC Manager.

Eye Care Mode

Eye Care Mode intelligently adjusts the color temperature of the screen and can reduce the chances of developing eye fatigue or eye strain.

Super Resolution (for selected models)

By utilizing the capabilities and potentials of Intel processors, Super Resolution helps you play videos with a higher resolution than the original. It works especially well in cases where the source video has poor resolution.

Smart Noise Cancelling

This is a noise reduction feature that filters out input and output noises to enhance your audio experience.

You can switch the battery’s active charging mode in Lenovo Vantage or Lenovo PC Manager to suit your usage habits. The recommended temperature range for charging is between 10°C (50°F) and 35°C (95°F).

Normal mode

Normal mode is the most basic charging mode. In normal mode, it typically takes 2 to 4 hours for the battery to charge from 0% to 100%.

Rapid charge mode

If you want the battery to be charged faster than in normal mode, switch the battery charging to rapid charge mode. The table below lists the typical time needed for batteries in rapid charge mode.

Conservation mode

If your computer is constantly plugged into an electrical outlet, consider switching to conservation mode. In this mode, the battery will not be fully charged. Instead, the battery’s charge will be kept within 75%–80%. This is beneficial to the long-term health of the battery.

Overnight charge optimization

If you have a regular pattern of plugging in your computer at night and unplugging it in the morning, this mode can optimize charging. It adapts its charging behavior based on observation, keeping the battery within a specific range for an extended period during the night before fully charging to 100% by the time you usually unplug. This is beneficial to the long-term health of the battery.

If your computer is constantly plugged in to an electrical outlet and the battery rarely discharges, the battery may not be charged to its full capacity even if the battery meter reports 100% charge. You can recover the battery’s full charging potential simply by discharging and re-charging the battery.

Step 1. Unplug the computer and use it until the battery charge drops below 20%.

Step 2. Plug in the computer and charge the battery to 100%.

You can switch the operation mode in the pre-installed app Legion Space or Lenovo Legion Zone. As a shortcut, you can also use the key combination fn + Q. The following table lists the available operation modes and their recommended conditions.

Note: When the computer is operating on battery power or is plugged in using an under-rated power adapter, you may not be able to switch it to Performance mode. In Balance mode, the computer dynamically switches between Performance mode and Quiet mode based on the tasks that are running on the computer.

The display on your LENOVO LEGION PRO 5 16IRX10 may support dual refresh rates. A higher refresh rate provides a smoother viewing experience for videos and games. You can manually switch the refresh rate.

For Windows operation systems, the manual settings are usually found in Settings → System → Display. As a shortcut, you can also use the key combination fn + R to switch the display refresh rate.

Note: Not all displays support dual refresh rates. If you cannot find settings to change the display refresh rate, the refresh rate of the display might be fixed or cannot be manually changed.

UEFI/BIOS is the first program that runs when a computer starts. It initializes hardware components and loads the operating system. You can change certain UEFI/BIOS settings in its setup utility.

Step 1. Turn on or restart the computer.

Step 2. When the Lenovo logo appears on the screen, press F2 repeatedly. Or enter Novo Button menu.

Step 3. On the welcome screen, select More Settings.

Occasionally, you may need to start the computer with a program or boot manager loaded from another device or a network location.

Step 1. Turn on or restart the computer.

Step 2. Press F12.

Step 3. From the boot device menu, select a boot device to start the computer.

You can make a permanent change on boot devices in the UEFI/BIOS setup utility. Select the Boot menu; in the UEFI Boot Order section, select the desired boot device and move it to the top of the device list. Save changes and exit the setup utility for the change to take effect.

The always-on function for the designated USB connector can be enabled or disabled in the UEFI/BIOS setup utility.

Step 1. Open the UEFI/BIOS setup utility.

Step 2. Select Configuration → Power Management → Always On USB and press Enter.

Step 3. Change the setting to Disabled or Enabled.

Step 4. Select Exit → Exit Saving Changes.

You can set various types of passwords in the UEFI/BIOS setup utility.

Notes:

• All passwords set in the setup utility consist of alphanumeric characters only.

• If you start the setup utility using the user password, you can only change a few settings.

Set administrator password

You set the administrator password to prevent unauthorized access to the UEFI/BIOS setup utility.

Step 1. Open the UEFI/BIOS setup utility.

Step 2. Select Security → Set Administrator Password and press Enter.

Step 3. Enter a password string that contains only letters and numbers and then press Enter.

Step 4. Enter the password again and press Enter.

Step 5. Select Exit → Exit Saving Changes.

Change or remove administrator password

Only the administrator can change or remove the administrator password.

Step 1. Open the UEFI/BIOS setup utility using the administrator password.

Step 2. Select Security → Set Administrator Password and press Enter.

Step 3. Enter the current password.

Step 4. In the Enter New Password text box, enter the new password.

Step 5. In the Confirm New Password text box, enter the new password again. (Note: To remove the password, press Enter in both text boxes without entering any character.)

Step 6. Select Exit → Exit Saving Changes.

Set user password

You must set the administrator password before you can set the user password.

Step 1. Open the UEFI/BIOS setup utility using the administrator password.

Step 2. Select Security → Set User Password and press Enter.

Step 3. Enter a password string that contains only letters and numbers and then press Enter. The user password must be different from the administrator password.

Step 4. Enter the password again and press Enter.

Step 5. Select Exit → Exit Saving Changes.

Enable power-on password

If the administrator password has been set, you can enable the power-on password to enforce greater security.

Step 1. Open the UEFI/BIOS setup utility.

Step 2. Select Security → Power on Password and press Enter.

Step 3. Change the setting to Enabled.

Step 4. Select Exit → Exit Saving Changes.

Set hard disk password

Attention: Be extremely careful when setting a hard disk password. If you forget the hard disk password, data recovery is not possible.

Step 1. Open the UEFI/BIOS setup utility using the administrator password.

Step 2. Select Security → Set Hard Disk Password and press Enter.

Step 3. Follow on-screen instructions to set both master and user hard disk passwords. They must be set at the same time.

Step 4. Select Exit → Exit Saving Changes.

Change or remove hard disk password

Step 1. Open the UEFI/BIOS setup utility.

Step 2. Select Security.

Step 3. To change or remove the master password, select Change Master Password and press Enter. (Note: If you remove the master hard disk password, the user hard disk password is also removed.)

Step 4. To change the user hard disk password, select Change User Password and press Enter. (Note: The user hard disk password cannot be removed separately.)

Step 5. Select Exit → Exit Saving Changes.

Press and hold the power button until the computer turns off. Then restart the computer.

1. Carefully unplug the ac power adapter and turn off the computer immediately. The more quickly you stop the current from passing through the computer the more likely you will reduce damage from short circuits.

Attention: Although you might lose some data or work by turning off the computer immediately, leaving the computer on might make your computer unusable.

2. Wait until you are certain that all the liquid is dry before turning on your computer.

CAUTION: Do not try to drain out the liquid by turning over the computer. If your computer has keyboard drainage holes on the bottom, the liquid will be drained out through the holes.

Your computer may have Flip to Start enabled. Many Lenovo notebook computers include a sensor that can detect the angle at which the lid is opened. If Flip to Start is enabled, the computer will respond by starting up automatically.

If you don’t like this feature, you can disable it. Flip to Start can be enabled and disabled in:

• Lenovo Vantage or Lenovo PC Manager

• Firmware Setup Utility

Your Windows operating system version is not up to date and does not include the necessary software components. Update your Windows operating system to version 23H2 or later using Windows Update and then try again.

Note: The Version 23H2 update may not be immediately available for your PC. You may need to periodically open Windows Update and manually check for updates to install the 23H2 update when it becomes available for your PC.

Customer replaceable units (CRUs) are parts that can be replaced by the customer. A LENOVO LEGION PRO 5 16IRX10 may contain the following types of CRUs:

• Self-service CRU: Parts that can be replaced easily by customers themselves or by trained service technicians at an additional cost.

• Optional-service CRU: Parts that can be replaced by customers with a greater skill level. Trained service technicians can also provide service to replace the parts under the type of warranty designated for the customer’s machine.

The table below lists the CRUs and CRU types that are defined for your product model.

USB connectors for connecting assistive technology devices

Most Lenovo PCs are equipped with at least one USB connector (Standard-A, Type-C, or both) that can be used to connect various assistive technology devices, such as a refreshable braille display.

Keyboard accessibility

Lenovo keyboards are designed with accessibility in mind:

• keyboard layout: A standard QWERTY layout. The F and J keys have bumps for orientation. The 5 key on the numeric keypad also has a bump.

• Standard modifier keys: Includes alt, ctrl, shift, and Windows logo keys.

• The tab key: Allows users to cycle through interactive elements.

• Hotkeys: Offer convenient access to frequently used settings.

• The fn key and the fnlock: The fn key is used with dual-function keys. The fnlock (fn + esc) allows users to access both hotkey and function key functionalities without pressing two keys simultaneously.

• Keyboard backlight: Can be controlled by pressing fn + Space to help with use in dark lighting conditions.

Biometric devices

Some LENOVO LEGION PRO 5 16IRX10 models are equipped with an IR camera for facial recognition or a fingerprint reader. These can be used for authentication in Windows 11, which is beneficial for users who find it difficult to type passwords.

Narrator is Windows 11’s built-in screen-reading application. It can read screen content aloud to users and also accept input from the keyboard.

Start and stop Narrator

You can start and stop Narrator by selecting the toggle button for Narrator in Settings → Accessibility. Additionally, the keyboard shortcut Windows logo key + ctrl + enter provides quick access to both the start and stop functions.

Customize Narrator

Narrator offers a variety of controls that allow you to customize it. You can install additional text-to-speech voices, select your preferred voice, and adjust the verbosity level. All Narrator settings are located in the Accessibility section of the Settings app. The keyboard shortcut Windows logo key + ctrl + N offers quick access to these settings.

Windows offers options for adjusting text sizes, applying a high-contrast theme, and using Magnifier.

Adjust text sizes

Step 1. Select Start → Settings → Accessibility → Text size.

Step 2. Use the slider and the preview pane to select a size that fits your need and then select Apply.

Apply a high-contrast theme

Step 1. Select Start → Settings → Accessibility → Contrast themes.

Step 2. In the dropdown list for Contrast themes, select one option and then select Apply.

Enable Magnifier

You can enable Windows 11 Magnifier to enlarge specific areas or the entire screen.

Step 1. Select Start → Settings → Accessibility → Magnifier.

Step 2. Select the toggle to enable or disable Magnifier.

Sticky Keys is an accessibility feature in Windows that, when enabled, allows users to press keys in sequence to activate shortcut functions, instead of holding them down simultaneously.

To enable Sticky Keys, press the shift key five times in quick succession. When the confirmation dialog box appears, select Yes. To disable Sticky Keys, press the shift key five times again and choose No when prompted.