LENOVO LEGION PRO 5 16ADR10 D1 (01) PDF DOCUMENT

The fn key can be used in combination with specific keys to adjust device settings or activate additional functions on your LENOVO LEGION PRO 5 16ADR10 D1.

Your LENOVO LEGION PRO 5 16ADR10 D1 includes a dedicated numeric keypad on the far right of the keyboard for entering numbers and operators quickly. Press the num lock key to enable or disable the numeric keypad.

The functions for three-finger touchpad gestures can be modified in Windows Settings.

Step 1. Select Settings → Bluetooth & devices → Touchpad.

Step 2. Under Three-finger gestures, use the drop-down lists to modify the functions for the swipe or tap gestures.

Connect your computer to the desired display with an appropriate cable.

Step 1. Connect one end of the display cable to the HDMI connector or a multi-purpose USB Type-C connector on your computer.

Step 2. Connect the other end of the cable to the display.

Ensure that:

• Both your computer and the display support Miracast® technology.

• The display is connected to the same Wi-Fi network as your computer and is discoverable.

Step 1. Press Windows key + K. The computer searches for wireless display devices and audio devices and lists the results.

Step 2. Select the display you want to connect to, and then follow the on-screen instructions.

Step 1. Right-click on a blank area on the desktop, and then select Display settings. Your computer shows the Display window.

Step 2. Select the display for which you want to change the settings.

Step 3. Change the display settings as necessary.

Step 1. Press the display icon hotkey or fn + the display icon hotkey. Your computer shows a list of display modes, with the current mode highlighted.

Step 2. Select a display mode from the list.

The camera switch on your LENOVO LEGION PRO 5 16ADR10 D1 is a mechanical button that prevents any attempt from capturing your image, thus protecting your privacy. To disable the camera, slide the camera switch to the direction with the crossed-out camera icon. When you want to use the camera again, slide the camera switch to the other direction.

If you slide the camera switch to the disabled position during a video call, people on the video call will not be able to see you. If you slide the camera switch back to the opposite position, they will be able to see you again.

The night light feature in Windows 11 enables users to switch to warmer color tones, reducing blue light emission to alleviate eye strain or fatigue.

Step 1. Open the quick settings menu by selecting the network, sound, or battery icons on the far right of the taskbar or by using the keyboard shortcut Windows logo key + A.

Step 2. Select the button for night light to turn it on or off.

If Windows 11 night light mode is turned on, you can adjust the color temperature of the screen.

Step 1. Select Start → Settings.

Step 2. Select System → Display → Night light settings.

Step 3. Move the slider to adjust the color temperature.

Smart Noise Cancelling on your LENOVO LEGION PRO 5 16ADR10 D1 is a noise reduction feature that enhances your audio experience by filtering out input and output noises.

The battery pack of your LENOVO LEGION PRO 5 16ADR10 D1 supports multiple charging modes that are suitable for different power usage habits. You can switch the battery’s active charging mode in Lenovo Vantage or Lenovo PC Manager.

Normal mode: This is the most basic charging mode. It typically takes 2 to 4 hours for the battery to charge from 0% to 100%.

Rapid charge mode: If you want the battery to be charged faster than in normal mode, switch the battery charging to rapid charge mode.

Conservation mode: If your computer is constantly plugged into an electrical outlet, consider this mode. The battery will not be fully charged; instead, its charge will be kept within 75%–80%, which is beneficial to the long-term health of the battery.

Overnight charge optimization: This mode adapts charging behavior based on your usage patterns. During the nighttime, the battery is charged to a particular range and kept there for an extended period, before being further charged to 100% just before you typically unplug it. This ensures safe charging and is beneficial to the long-term health of the battery.

If your computer is constantly plugged in and the battery rarely discharges, it may not charge to its full capacity even if the meter reports 100%. You can recover the battery’s full charging potential by discharging and re-charging it.

Step 1. Unplug the computer and use it until the battery charge drops below 20%.

Step 2. Plug in the computer and charge the battery to 100%.

Yes, the USB Type-C connector with a USB-PD icon on the left side of the LENOVO LEGION PRO 5 16ADR10 D1 conforms to the USB Power Delivery Specification. If you don’t have the included ac power adapter, you can use a qualified USB Type-C charger that is also Power Delivery compliant to charge the computer in a sleep or powered-off state. Lenovo branded USB Type-C chargers with the following ratings are tested to work:

• 20 V, 4.75 A

• 20 V, 5 A

• 20 V, 6.75 A

• 20 V, 7 A

However, this USB Type-C connector is not the primary power input. When the computer is operating, power from a USB Type-C charger may be insufficient, causing the computer to not operate at full capacity or the battery to stop charging or charge slowly. Use the included ac power adapter whenever possible.

CAUTION: When purchasing third-party USB Type-C chargers, choose a product that is safety approved or certified to avoid damage or electrical hazards.

By default, pressing the power button puts the computer to sleep mode. You can change this behavior in the Windows Control Panel.

Step 1. Type Control Panel in the Windows search box and then press Enter. Open the control panel and view by large or small icons.

Step 2. Select the power options and then click to choose what the power button does.

You can switch the operation mode in the pre-installed app Legion Space or Lenovo Legion Zone, or by using the key combination fn + Q.

The display of your LENOVO LEGION PRO 5 16ADR10 D1 may support dual refresh rates. You can manually switch its display to work at either the higher or lower refresh rate. For Windows, the manual settings are usually found in Settings → System → Display. As a shortcut, you can also use the key combination fn + R to switch the display refresh rate.

Step 1. Turn on or restart the computer.

Step 2. When the Lenovo logo appears on the screen, press F2 repeatedly. Or enter Novo Button menu.

Step 3. On the welcome screen, select More Settings.

When enabled, the Fn key and the Ctrl key can be used interchangeably for key combinations involving the Ctrl key. For example, you can press either ctrl + A or fn + A to select all text in a text editing application.

Step 1. Open the UEFI/BIOS setup utility.

Step 2. Select Configuration → General Settings.

Step 3. Change the Fool Proof Fn Ctrl setting to Enabled or Disabled.

Step 4. Select Exit → Exit Saving Changes.

You may need to start the computer with a program or boot manager loaded from another device or a network location. After the system firmware initializes all devices, you can press an interruption key to display the boot menu and select a desired boot device.

Step 1. Turn on or restart the computer.

Step 2. Press F12.

Step 3. From the boot device menu, select a boot device to start the computer.

You can also make a permanent change on boot devices in the UEFI/BIOS setup utility. Select the Boot menu; in the UEFI Boot Order section, select the desired boot device and move it to the top of the device list. Save changes and exit the setup utility for the change to take effect.

For computers with always-on connectors, the always-on function can be enabled or disabled in the UEFI/BIOS setup utility.

Step 1. Open the UEFI/BIOS setup utility.

Step 2. Select Configuration → Power Management → Always On USB and press Enter.

Step 3. Change the setting to Disabled or Enabled.

Step 4. Select Exit → Exit Saving Changes.

You set the administrator password to prevent unauthorized access to the UEFI/BIOS setup utility.

Step 1. Open the UEFI/BIOS setup utility.

Step 2. Select Security → Set Administrator Password and press Enter.

Step 3. Enter a password string that contains only letters and numbers and then press Enter.

Step 4. Enter the password again and press Enter.

Step 5. Select Exit → Exit Saving Changes.

Only the administrator can change or remove the administrator password.

Step 1. Open the UEFI/BIOS setup utility using the administrator password.

Step 2. Select Security → Set Administrator Password and press Enter.

Step 3. Enter the current password.

Step 4. In the Enter New Password text box, enter the new password.

Step 5. In the Confirm New Password text box, enter the new password again.

Note: If you want to remove the password, press Enter in both text boxes without entering any character.

Step 6. Select Exit → Exit Saving Changes.

If you remove the administrator password, the user password is also removed.

You must set the administrator password before you can set the user password.

Step 1. Open the UEFI/BIOS setup utility using the administrator password.

Step 2. Select Security → Set User Password and press Enter.

Step 3. Enter a password string that contains only letters and numbers and then press Enter. The user password must be different from the administrator password.

Step 4. Enter the password again and press Enter.

Step 5. Select Exit → Exit Saving Changes.

If the administrator password has been set, you can enable the power-on password to enforce greater security.

Step 1. Open the UEFI/BIOS setup utility.

Step 2. Select Security → Power on Password and press Enter. (Note: The administrator password must be set in advance.)

Step 3. Change the setting to Enabled.

Step 4. Select Exit → Exit Saving Changes.

You can set a hard disk password in the setup utility to prevent unauthorized access to your data.

Step 1. Open the UEFI/BIOS setup utility using the administrator password.

Step 2. Select Security → Set Hard Disk Password and press Enter.

Step 3. Follow on-screen instructions to set both master and user hard disk passwords. (Note: The master and user hard disk passwords must be set at the same time.)

Step 4. Select Exit → Exit Saving Changes.

Step 1. Open the UEFI/BIOS setup utility.

Step 2. Select Security.

Step 3. Change or remove the hard disk password.

To change or remove the master password, select Change Master Password and press Enter. Note: If you remove the master hard disk password, the user hard disk password is also removed.

To change the user hard disk password, select Change User Password and press Enter. Note: The user hard disk password cannot be removed separately.

Step 4. Select Exit → Exit Saving Changes.

Press and hold the power button until the computer turns off. Then restart the computer.

1. Carefully unplug the ac power adapter and turn off the computer immediately. The more quickly you stop the current from passing through the computer the more likely you will reduce damage from short circuits.

Attention: Although you might lose some data or work by turning off the computer immediately, leaving the computer on might make your computer unusable.

2. Wait until you are certain that all the liquid is dry before turning on your computer.

CAUTION: Do not try to drain out the liquid by turning over the computer. If your computer has keyboard drainage holes on the bottom, the liquid will be drained out through the holes.

Your LENOVO LEGION PRO 5 16ADR10 D1 may have Flip to Start enabled. Many Lenovo notebook computers include a sensor that can detect the angle at which the lid is opened. If Flip to Start is enabled, the computer will respond by starting up automatically.

If you don’t like this feature, you can disable it. Flip to Start can be enabled and disabled in:

• Lenovo Vantage or Lenovo PC Manager

• Firmware Setup Utility

Your Windows operating system version is not up to date and does not include the necessary software components. Update your Windows operating system to version 23H2 or later using Windows Update and then try again.

The table below lists the CRUs and CRU types that are defined for your product model.

Record product information and problem details before you contact Lenovo.

keyboard layout: The alphabetic keys are arranged in a QWERTY layout. The F and J keys have bumps that make them tactilely distinguishable, serving as an orientation aid for skilled typists. Some keyboards include a separate numeric keypad where the 5 key features a bump to make it tactilely distinguishable.

Standard modifier keys: The keyboard is equipped with standard modifier keys for PCs, including the alt key, the ctrl key, the shift key, and the Windows logo key.

The tab key: Located in the leftmost column of the keyboard, the tab key allows users to press tab and alt + tab (in reverse order) to cycle through interactive elements in accessible applications and documents.

Hotkeys: Many keyboards feature hotkeys in the top row, offering convenient access to frequently used settings.

The fn key and the fnlock: The fn key is a Lenovo-defined modifier key used with top-row dual-function keys and other keys to access specific settings. The fnlock (fn + esc) is a switch that allows users to access both hotkey and function key functionalities without needing to press two keys simultaneously.

Keyboard backlight: Many keyboards are equipped with backlights to help use the keyboard in dark lighting conditions, controlled by pressing fn + Space.

Windows 11 provides a centralized location within the Settings app for activating and configuring all accessibility features. You can access this section by selecting Start → Settings → Accessibility. Additionally, the keyboard shortcut Windows logo key + U provides quick access to this interface.

Start and stop Narrator: You can start and stop Narrator by selecting the toggle button for Narrator in the centralized Accessibility section of the Settings app. The keyboard shortcut Windows logo key + ctrl + enter also provides quick access to both the start and stop functions.

Customize Narrator: You can install additional text-to-speech voices and adjust the verbosity level. All Narrator settings are located in the centralized Accessibility section of the Settings app. The keyboard shortcut Windows logo key + ctrl + N offers quick access to these settings.

If you find the text on the screen is too small to read, you can scale up the size of text displayed by Windows and other applications.

Step 1. Select Start → Settings → Accessibility → Text size.

Step 2. Use the slider and the preview pane to select a size that fits your need and then select Apply.

For individuals with low vision, Windows 11 offers contrast themes that enhance text readability by using a background color that sharply contrasts with the text.

Step 1. Select Start → Settings → Accessibility → Contrast themes.

Step 2. In the dropdown list for Contrast themes, select one option and then select Apply.

To exit a contrast theme, select None from the dropdown list. The keyboard shortcut for turning on and off contrast theme is left alt + left shift + prt sc.

You can enable Windows 11 Magnifier to enlarge specific areas or the entire screen, making text and images easier to see.

Step 1. Select Start → Settings → Accessibility → Magnifier.

Step 2. Select the toggle to enable or disable Magnifier.

The keyboard shortcuts for enabling and disabling Magnifier are Windows logo key + Plus sign (+) and Windows logo key + esc, respectively. When Magnifier is enabled, you can use Windows logo key + plus sign (+) and minus sign (-) to zoom in and zoom out.

Sticky Keys is an accessibility feature in Windows that allows users to press keys in sequence to activate shortcut functions, rather than holding them down simultaneously.

To enable Sticky Keys, press the shift key five times in quick succession. When the confirmation dialog box appears, select Yes. To disable Sticky Keys, press the shift key five times again and choose No when prompted.

Perceivable content: Text content is presented using popular and easy-to-read fonts with high contrast. Non-text elements, such as graphics, are accompanied by alternative text descriptions for screen readers.

Understandable content: The documentation is presented visually in a well-structured and simple layout. It includes hidden tags or markup that can be used by assistive technologies to convey the structure to users.

Operable content: Documentation includes industry-standard tags for sectioning and interactive elements like titles, headings, links, and buttons. Screen reader users can use standard keyboard modifier keys to navigate and interact with the documentation.