Free English LINX EMBER (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.


CLICK HERE TO DOWNLOAD LINX EMBER (01) PDF DOCUMENT

If this is not the document you want for this product, click here to see if we have any other documents for this product.

How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.

What is included in the LINX EMBER kit?

The kit includes:

1 Ember Battery

1 Ember Refillable Atomizer

1 Mouthpiece (with Filter Section included)

1 USB Charger


What material is the LINX EMBER intended to be used with?

This vaporizer is intended to be used with concentrate.


How do I charge the LINX EMBER?

1. Screw the battery into the USB charger and connect the charger to a viable USB power outlet.

2. The USB charging indicator turns red when charging and green when fully charged. It usually takes 2 to 2.5 hours to reach full charge.


How do I lock and unlock the LINX EMBER?

Press the power button five (5) times quickly to turn the device on and off.


How do I load concentrate into the LINX EMBER?

1. Screw off the mouthpiece from the refillable atomizer.

2. Fill the atomizer with your preferred concentrate. For best results, make sure to use no more than the size of a grain of rice.

3. Re-attach the mouthpiece to the atomizer.


How do I change the temperature settings on the LINX EMBER?

Press the power button three (3) times quickly to toggle between:

Blue: Low

Green: Medium

Red: High


How do I vape using the LINX EMBER?

Inhale while holding the power button.


How do I activate Sesh Mode on the LINX EMBER?

Press the power button two (2) times quickly for 10 seconds of continuous heating.


How do I know when the LINX EMBER battery is low?

When the LED light around the power button blinks, it is indicating that it is time to recharge the device. Fully charge the battery before next use.


Does the LINX EMBER have overheat protection?

Yes. If the power button is held down for fifteen (15) seconds, the battery will enter standby mode. This is signified by the button blinking white ten (10) times.

To exit standby mode, press the button five (5) times.

NO IMAGE CONTENT AT THIS TIME. PLEASE CHECK BACK LATER

CLICK HERE TO DOWNLOAD LINX EMBER (01) PDF DOCUMENT


Leave comments, questions, reviews, tips, tricks, hacks or page errors below. Account not required.