LASER PB-20K24 (01) PDF Document

The following items are included in the box:

• Powerbank

• 3-in-1 charging cable

• User manual

The LASER PB-20K24 has the following ports:

Micro USB port (input): This port only charges the powerbank; it cannot charge other devices.

USB-A ports (output): These ports are for charging your other devices.

USB-C port (input & output): This port can be used for charging the powerbank and for charging your other devices.

The power button on the LASER PB-20K24 has two functions:

• Press once to check the battery capacity.

• Double-press to turn off charging for other devices.

The green indicator on the LASER PB-20K24 is the fast charging indicator. It will light up when the powerbank is in fast-charging mode.

To charge your devices with the LASER PB-20K24, follow these steps:

• Use the USB-C or one of the two USB-A ports to charge your devices.

• Your device will start charging automatically upon connection.

• When in fast-charging mode, the green indicator will light up.

• Unplug the cable when your device is fully charged.

To charge the LASER PB-20K24 powerbank itself, follow these instructions:

• Use the USB-C or Micro USB port to charge the powerbank.

• Once plugged in, the powerbank will start charging automatically.

• When the powerbank is fully charged, disconnect the cables.

Capacity: 20,000mAh

Power – input:

• Micro USB: 5V/2A, 9V/2A, 12V/1.5A

• USB-C: 5V/2.4A, 9V/2A, 12V/1.5A

Power – output:

• USB-C: 5V/3A, 9V/2.22A, 12V/1.67A

• USB-A: 5V/3A, 9V/2A, 12V/1.5A, 5V/4.5A, 4.5V/5A

Dimensions (L×W×D): 68×147×30mm

Weight: 414g

• Avoid charging the powerbank and other devices simultaneously.

• Only use the powerbank for charging electronic devices.

• Disconnect when not in use.

• Avoid exposure to extreme temperatures, direct sunlight and water.

• Do not disassemble or modify the powerbank.

• Follow local laws for proper disposal and battery recycling; avoid putting it in kerbside bins.