KOGAN KAQL100XQ98GSVA (01) PDF MANUAL

The power button switches the TV between on and standby mode.

The indicator light on the remote control is a visual indicator.

To mute or restore your TV sound, press the mute button (4*).

To access Live TV, press the TV button.

To display the present channel information such as the current time and channel name, press the INFO button.

To open the main menu and list the sources, press the source button.

To control your TV using your voice, press the Google Assistant button to talk to Google.

To switch to Kids mode, press the Kids mode button.

In the HOME page, this button is the “Dashboard” function. On Live TV, this button is the “Menu” function.

To navigate menus, use the Cursor UP/LEFT/RIGHT/DOWN buttons.

To move back through menus, press the back button.

To open the Live TV EPG, press the EPG button.

To display the home screen, press the home button.

To connect to YouTube, press the YouTube button.

To connect to NETFLIX for viewing Online TV shows and films, press the NETFLIX button.

To connect to Prime video, press the Prime Video button.

To connect to Disney+, press the Disney+ button.

To open the KARAOKE menu, press the KARAOKE button.

To access SUB.T, press the SUB.T button.

1. Attach stands to the base of the TV.

2. Insert two 20mm screws for each stand, and use a Phillips head screwdriver (not supplied) to tighten.

1. Open the battery compartment cover on the back side.

2. Insert two 1.5V AAA size batteries, making sure to match the polarity markings (+ / -) of the batteries with the diagram inside the compartment.

3. Replace the battery compartment cover.

1. Connect an antenna cable (not supplied) via the ‘ANT’ input port at the back of the TV.

2. Ensure the antenna cable is also connected to a working antenna, either via an antenna wall socket in your home, or directly.

Plug the power cord into a suitable power outlet, then press the POWER (U) button on the remote control, making sure to aim it at the sensor at the front of the TV. Alternatively, you can press the power button on the lower side of the back panel on the TV.

Press the POWER (C) button on the remote control to enter standby mode.

To power down the TV completely, unplug the power cord from the power outlet.

If you will not use the TV for a long time, it is recommended to unplug the set from both the power outlet and aerial.

1. Press “BACK” and Home simultaneously on the remote control for 3 seconds to enter the Bluetooth pairing mode. The indicator light on the remote control will flash when entering pairing mode.

2. Select the “Skip” icon to skip pairing mode.

Use the UP/DOWN buttons to select system languages, then press 【OK】 to confirm.

Use the UP/DOWN buttons to select your TV setup, then press【OK】 to confirm.

1. Use your Android™ Smart phone to download and open the Google Home App on your phone.

2. Use the Google Home app to scan the QR code on the TV.

3. Follow the instructions in the Google Home app.

Press “BACK” to cancel if you just want to use your TV normally, select “Set up basic TV”.

Press “OK” to enter the next page to select your wifi network.

Press the UP/DOWN buttons to select the Wi-Fi network you wish to connect to, enter the password, and then confirm to connect. If you select “Skip”, it could be performed in the homepage or settings menu.

By accepting the Terms of Service to improve the product experience, select “Accept” to proceed with this condition.

Use the UP/DOWN buttons to select your region or country, then press “OK” to confirm.

Use the UP/DOWN buttons to select Antenna/Cable/Satellite to scan TV channels, then press 【OK】 to confirm. If you select “Skip”, the channel scan could be performed in the menu.

Verify settings in system settings, then select “Start now”.

Select install or uninstall the recommended apps by using this process. Select “Start exploring” to the next page.

Once you have completed the initial setup, you will enter the homepage or press the home button to display the homepage.

Selected the “For you” to browse content from across your apps, intelligently organised just for you.

Watch what’s happening live. Movies and shows are grouped in ways that reflect your interests, so you can binge your favorite sagas and find your way to unchartered worlds.

Select the “Apps” to have access to all your applications. Pre-installed applications are available for you in this row.

Find your purchases, rentals and watch listed content across TV, mobile and web here.

Thousands of movies and shows at the sound of your voice. Ask Google to quickly find what you want to watch.

1. Press the UP/DOWN button to select “Settings” which is in the upper right corner of the screen.

2. Press the UP/DOWN button to select the option which you want to adjust in the Settings menu.

3. Press “OK” button to enter.

1. Press the UP/DOWN button to select “Channel Source” & “Inputs”.

2. Press “OK” to enter “Channels”, then press UP/DOWN to choose Analog or antenna to scan the channels.

3. Press the UP/DOWN button to select “Inputs”, press “OK” to enter “Inputs”, then press UP/DOWN to choose HDMI1, HDMI2, HDMI3, HDMI4, Composite etc.

1. Press the UP/DOWN buttons to select “Network & Internet” in the settings menu.

2. Press the UP/DOWN buttons to select Wi-Fi/Add new network/Scanning always available/Proxy settings/IP settings.

1. Press the UP/DOWN buttons to select the options of About, Date & Time, Timer, Language, Inputs, Picture, Sound, Google Assistant, Reset and others.

2. Press “OK” to jump to the corresponding sub-option.

1. Press the back button to check additional information such as System update, Device name, Restart, Status, and more.

2. Press the back button to return to the previous menu.

3. Press the back button to exit the menu.

If Factory reset is selected, it will erase all data from your device’s internal storage, including your Google Account, system and app data and settings, and downloaded apps.

1. Press the input source button to select input source.

2. Press the settings button, then select “Channels” and select “New Channels available” to enter.

To have access and to download applications, you must sign in with a Google Account.

Once you open Google Play, you will be prompted to sign in or create a new account.

Once you have signed in, you will be brought to the below page, scroll through the list of applications available for download or go to the search button, and search via entering text or by asking Google Assistant on your voice remote.

• Try a different channel.

• Adjust the antenna.

• Check all connections.

• Try another channel.

• Press the TV/AV button.

• Ensure the TV is plugged in.

• Check the antenna connection.

• Check the volume settings on any external speakers connected to your television.

• Adjust the TV volume accordingly.

• Check another channel or input.

• Check that MUTE hasn’t been turned on.

• Replace remote control batteries.

• Check battery terminals.

• Remote is out of range, move closer to TV.

• Remove any obstructions between remote and IR sensor of TV.

• Make sure the power cord to your TV is plugged in and turned on.

Adjust the horizontal and vertical position.

• Test the device with a different HDMI cable.

• Plug the device into another HDMI port.

• Try a different device connected to the same cable and port.

• Perform a factory reset on your TV.

• Make sure the program itself is broadcast in colour.

• Select the picture menu, then adjust the colour and tint submenus.

Check all connections.

• Check direction, location and connections to your antenna.

• Issues may be caused by the use of an indoor antenna (poor signal).