KOGAN KAOD65X98JSVA (01) PDF MANUAL

Attach stands to the base of the TV.

Insert two 18/10 mm screws for each stand, and use a Phillips head screwdriver (not supplied) to tighten.

Open the battery compartment cover on the back side.

Insert two 1.5V AAA size batteries, making sure to match the polarity markings (+ / -) of the batteries with the diagram inside the compartment.

Replace the battery compartment cover.

Connect an antenna cable (not supplied) via the ‘ANT’ input port at the back of the TV.

Ensure the antenna cable is also connected to a working antenna, either via an antenna wall socket in your home, or directly.

Plug the power cord into an electrical outlet.

Press the POWER button on the remote control, making sure to aim it at the sensor at the front of the TV.

Alternatively, you can press the power button on the lower side of the back panel on the TV.

Press the POWER button on the remote control to enter standby mode.

To power down the TV completely, unplug the power cord from the power outlet.

If you will not use the TV for a long time, it is recommended to unplug the set from both the power outlet and aerial.

For the first initial setup, an on-screen setup wizard will guide you through setting up your TV. Follow the guide to set up your TV correctly.

Press the “BACK” and Home buttons simultaneously on the remote control to enter the Bluetooth pairing mode. The indicator light on the remote control will flash when starting the pairing mode.

Select the “Skip” icon to skip the pairing mode.

Use the UP/DOWN buttons to select system languages, then press the OK button to confirm.

Use the UP/DOWN buttons to select your TV setup, then press the OK button to confirm.

Use your Android Smart phone to download and open the Google Home App on your phone.

Use the Google Home app to scan the QR code on the TV device.

Follow the instructions in the Google Home App.

To cancel, press the “BACK” button. If you just want to use your TV normally, select “Set up basic TV”.

Press the “OK” button to proceed to the next page and select your Wi-Fi network.

Press the UP/DOWN buttons to select the Wi-Fi network you wish to connect to.

Enter the password and then confirm to connect.

If you select “Skip”, this can be done later in the homepage or settings menu.

By accepting the Terms of Service to improve the product experience, select “Accept” to proceed with this condition.

Select “Accept” to confirm if you want your location identified on your Google TV and agree to automatically send diagnostic information to help improve your experience.

Use the UP/DOWN buttons to select your region or country, then press the “OK” button to confirm.

Use the UP/DOWN buttons to select Antenna/Cable/Satellite to scan TV channels, then press the OK button to confirm.

If you select “Skip”, the channel scan can be performed later in the menu.

Verify settings in system settings, then select “Start now”.

Select “install” or “un-install” the recommended apps by using this process.

Select “Start exploring” to go to the next page.

Once you have completed the initial setup, you will automatically enter the home screen, or you can press the home button to display the homepage.

Selecting “For You” allows you to browse content from across your Apps, intelligently organized for you.

In “Movies & Shows”, you can watch what is happening live. Movies and Shows are grouped in ways that reflect your interests, allowing you to binge your favorite sagas and find your way to uncharted worlds.

Selecting “Apps” provides access to all your applications. Pre-installed applications are available in this row.

In the “Library” section, you can find your purchases, rentals, and watch-listed content across TV, mobile, and web.

You can search for thousands of movies and shows using your voice; ask Google to quickly find what you want to watch.

Press the UP/DOWN buttons to select “Settings”, which is located in the upper right corner of the screen.

Press the UP/DOWN buttons to select the option you want to adjust in the Settings menu.

Press the “OK” button to enter.

Press the UP/DOWN buttons to select “Channel Source” and “Inputs”.

Press “OK” to enter “Channels”, then press the UP/DOWN buttons to choose Analog, or antenna to scan the channels.

Press the UP/DOWN buttons to select “Inputs”, press “OK” to enter “Inputs”, then press the UP/DOWN buttons to choose HDMI1, HDMI2, HDMI3, HDMI4, Composite, etc.

Press the UP/DOWN buttons to select “Network & Internet” in the settings menu.

Press the UP/DOWN buttons to select Wi-Fi/Add new network/Scanning always available/Proxy settings/IP settings.

Press the UP/DOWN buttons to select options such as About, Date & Time, Timer, Language, Inputs, Picture, Sound, Google Assistant, Reset, and others.

Press “OK” to jump to the corresponding sub-option.

Press the UP/DOWN buttons to check additional information such as System update, Device name, Restart, Status, and more.

Press the back button to return to the previous menu.

Press the back button to exit the menu.

If a factory reset is selected, it will erase all data from your device’s internal storage, including your Google Account, system and app data and settings, and downloaded apps.

Press the input button to select the input source.

Press the settings button, then select “Channels” and select “New Channels available” to enter.

To have access and to download applications, you must sign in with a Google Account.

Once you open Google Play, you will be prompted to sign in or create a new account.

Once you have signed in, you will be brought to a page where you can scroll through the list of applications available for download, or go to the search button, and search by entering text or by asking Google Assistant on your voice remote.

Try a different channel.

Adjust the antenna.

Check all connections.

Try another channel.

Press the TV/AV button.

Make sure the TV is plugged in.

Check the antenna connection.

Check the volume settings on any external speakers connected to your television.

Adjust the TV volume accordingly.

Check another channel or input.

Check that MUTE hasn’t been turned on.

Make sure the program itself is broadcast in colour.

Select the picture menu, then adjust the colour and tint submenus.

Check all connections.

Check the direction, location, and connections to your antenna.

Issues may be caused by the use of an indoor antenna (poor signal).

Replace the remote control batteries.

Check the battery terminals.

If the remote is out of range, move closer to the TV.

Remove any obstructions between the remote and the IR sensor of the TV.

Make sure the power cord to your TV is plugged in and turned on.

Adjust the horizontal and vertical position.

Test the device with a different HDMI cable.

Plug the device into another HDMI port.

Try a different device connected to the same cable and port.

Perform a factory reset on your TV.