KIIROO PEARL2 (01) PDF Document

To charge the KIIROO PEARL2, insert the provided Pin USB charger cable into the charging point located at the very bottom of the device. Insert the other end into a USB port on a computer or wall adapter. Please note that a wall adapter is not included in the box.

Wait for the red LED light to blink slowly, which indicates that the device is charging. The LED light will glow solid green when the device is fully charged. Charging takes about 2 hours.

To power on the KIIROO PEARL2, press the multifunctional button at the bottom of the device and hold it for 4 seconds. A solid blue light will appear, indicating the device is in Bluetooth Mode. To turn off the device, hold the multifunctional button for 4 seconds until the light goes off.

To cycle through each mode, click the single multifunctional button until you reach the mode of your choice. The KIIROO PEARL2 has 7 modes:

0 clicks: Bluetooth mode

1 click: Touch-sensitive mode

2 clicks: Slow

3 clicks: Medium

4 clicks: Fast

5 clicks: Pattern 1

6 clicks: Pattern 2

Bluetooth Mode is indicated by a blue light. This is the only mode where you can send and receive signals to and from partners or content. To pair the KIIROO PEARL2 with content, you must download the FeelConnect 3.0 App on your mobile phone and follow the instructions to pair the device.

Touch-sensitive mode is reached by pushing the button once and is indicated by a white light (the glow may vary depending on the device color). In this mode, the KIIROO PEARL2 responds intuitively to touch; its surface will vibrate whenever it comes into contact with your body.

The LED light indicates the status of the KIIROO PEARL2 as follows:

Note: For the Black KIIROO PEARL2, the LED indicator for the preset modes will turn red.

Always use a water-based lubricant. Hold the KIIROO PEARL2 at the base and apply a generous amount of lubricant. Using lubricant will prolong the lifespan of the device and provide a more comfortable experience.

Do not use silicone lubricant as it will deteriorate the silicone of the KIIROO PEARL2. Do not use massage oils or hand cream as lubricants.

Always clean the KIIROO PEARL2 thoroughly after each use. Use warm water along with antibacterial soap, dish soap, or a specialized toy cleaner. Try to avoid cleaners containing alcohol, petrol, acetone, or harsh soaps as these might damage the silicone material.

Yes, the KIIROO PEARL2 is waterproof and can be used in the shower or bath.

Yes. The Bluetooth module is located in the handle. For personal safety and optimal reception, avoid inserting the handle. Only use the top 13cm of the device. Additionally, the KIIROO PEARL2 is intended for vaginal use only. Do not use it anally as it does not have a tapered base and might get stuck. It is not a hands-free device.

The KIIROO PEARL2 is to be used with the authorized FeelConnect 3.0 app only. Downloading third-party applications to control or interact with the device is done at your own risk and may void the warranty if damage occurs.