Free English KENWOOD KDC-X302 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD KENWOOD KDC-X302 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How do I perform basic operations like turning the power on/off, adjusting volume, and selecting a source on my KENWOOD KDC-X302?
You can perform basic operations using either the faceplate or the remote control of your KENWOOD KDC-X302.
| To | On the faceplate | On the remote control |
|---|---|---|
| Turn on the power | Press the SRC button. Press and hold to turn off the power. | Press and hold SRC to turn off the power. (Pressing SRC does not turn on the power.) |
| Adjust the volume | Turn the volume knob. | Press VOL ^ or VOL v. Press and hold VOL ^ to continuously increase the volume to 15. Press ATT during playback to attenuate the sound; press again to cancel. |
| Select a source | Press the SRC button repeatedly. | Press SRC repeatedly. |
| Change the display information | Press DISP repeatedly. | (Not available) |
How do I perform the initial setup on my KENWOOD KDC-X302 for the first time?
When you turn on the power for the first time, you need to select the display language and cancel the demonstration mode.
Select the display language and cancel the demonstration:
1. The display shows: “SEL LANGUAGE” → “PRESS” → “VOLUME KNOB”. Turn the volume knob to select [ENG] (English) or [SPA] (Spanish), then press the knob.
2. The display then shows: “CANCEL DEMO” → “PRESS” → “VOLUME KNOB”. Press the volume knob.
3. [YES] is selected for the initial setup. Press the volume knob again. “DEMO OFF” appears.
How do I set the clock and date on my KENWOOD KDC-X302?
To set the clock and date on your KENWOOD KDC-X302, follow these steps:
1. Press the volume knob to enter [FUNCTION].
2. Turn the volume knob to select [CLOCK], then press the knob.
To adjust the clock:
3. Turn the volume knob to select [CLOCK ADJUST], then press the knob.
4. Turn the volume knob to set the Hour and Minute, pressing the knob to confirm each setting.
5. Turn the volume knob to select [CLOCK FORMAT], then press the knob.
6. Turn the volume knob to select [12H] or [24H], then press the knob.
To set the date:
7. Turn the volume knob to select [DATE FORMAT], then press the knob.
8. Turn the volume knob to select [DD/MM/YY] or [MM/DD/YY], then press the knob.
9. Turn the volume knob to select [DATE SET], then press the knob.
10. Turn the volume knob to set the Day, Month, and Year, pressing the knob to confirm each setting.
11. Press and hold the back button to exit.
What are the initial settings I can configure on my KENWOOD KDC-X302?
You can configure various initial settings on your KENWOOD KDC-X302 by entering the [FUNCTION] menu from STANDBY mode.
1. Press SRC repeatedly to enter STANDBY.
2. Press the volume knob to enter [FUNCTION].
3. Turn the volume knob to select an item from the table below, then press the knob.
4. Repeat step 3 until the desired item is selected or activated.
5. Press and hold the back button to exit.
| Setting | Options and Description |
|---|---|
| AUDIO CONTROL | |
| SWITCH PREOUT | REAR/SUBWOOFER or REAR/SUB-W: Selects whether rear speakers or a subwoofer are connected to the line out terminals on the rear. |
| DISPLAY | |
| EASY MENU | ON: ZONE 1 illumination changes to white color when entering [FUNCTION]. OFF: ZONE 1 illumination remains as the [COLOR SELECT] color. |
| TUNER SETTING | |
| PRESET TYPE | NORMAL: Memorizes one station for each preset button in each band (FM1/FM2/FM3/AM). MIX: Memorizes one station or SiriusXM channel for each preset button, regardless of the selected band or SiriusXM channel. |
| SYSTEM | |
| KEY BEEP | ON: Activates the keypress tone. OFF: Deactivates. |
| SOURCE SELECT | |
| PANDORA SRC | ON: Enables PANDORA in source selection. OFF: Disables. |
| IHEART SRC | ON: Enables IHEARTRADIO in source selection. OFF: Disables. |
| SPOTIFY SRC | ON: Enables SPOTIFY in source selection. OFF: Disables. |
| BUILT-IN AUX | ON: Enables AUX in source selection. OFF: Disables. |
| CD READ | 1: Automatically distinguishes between audio file disc and music CD. 2: Forces to play as a music CD. No sound can be heard if an audio file disc is played. |
| USER S.REMO | |
| USER S.REMO | Allows configuration of steering wheel remote control. |
| F/W UPDATE | |
| UPDATE SYSTEM | YES: Starts upgrading the firmware. NO: Cancels. |
| FACTORY RESET | YES: Resets the settings to default (except stored stations). NO: Cancels. |
| CLOCK | |
| CLOCK DISPLAY | ON: The clock time is shown on the display even when the unit is turned off. OFF: Cancels. |
| ENGLISH/ESPANOL | Select the display language for [FUNCTION] menu and music information if applicable. By default, [ENGLISH] is selected. |
How do I search for and store radio stations on my KENWOOD KDC-X302?
To search for and store radio stations on your KENWOOD KDC-X302:
1. Press SRC repeatedly to select RADIO.
2. Press BAND repeatedly to select FM1/FM2/FM3/AM.
3. Press Seek S / T to search for a station.
To change the searching method:
Press the SEEK button repeatedly to cycle through the following modes:
• AUTO1: Automatically search for a station.
• AUTO2: Search for a preset station.
• MANUAL: Manually search for a station.
To store a station:
Press and hold one of the number buttons (1 to 6).
To select a stored station:
Press one of the number buttons (1 to 6).
Direct Access Tuning (using the remote control):
1. Press DIRECT to enter Direct Access Tuning.
2. Press the number buttons to enter a frequency.
3. Press ENT to search for a station.
To cancel, press the back button or DIRECT.
What other tuner settings can I adjust on my KENWOOD KDC-X302?
You can adjust advanced tuner settings on your KENWOOD KDC-X302 through the [FUNCTION] menu.
1. Press the volume knob to enter [FUNCTION].
2. Turn the volume knob to select an item from the table below, then press the knob.
3. Repeat step 2 until the desired item is selected/activated.
4. Press and hold the back button to exit.
| Setting | Options and Description |
|---|---|
| TUNER SETTING | |
| AUTO MEMORY | YES: Automatically starts memorizing 6 stations with good reception. NO: Cancels. (Selectable only if [NORMAL] is selected for [PRESET TYPE]). |
| MONO SET | ON: Improves the FM reception, but the stereo effect may be lost. OFF: Cancels. |
| CLOCK | |
| TIME SYNC | ON: Synchronizes the unit’s time to the Radio Broadcast Data System station time. OFF: Cancels. |
How do I control playback from a CD, USB, iPod, or Android device on my KENWOOD KDC-X302?
To play from a CD, USB, iPod, or Android device, connect it to your KENWOOD KDC-X302. The source changes automatically and playback starts. Use the following controls:
| To | On the faceplate | On the remote control |
|---|---|---|
| Playback/pause | Press the Play/Pause button. | Press ENT. |
| Reverse/Fast-forward | Press and hold Seek S / T. | Press and hold S / T. |
| Select a track/file | Press Seek S / T. | Press S / T. |
| Select a folder | Press the Folder Up/Down buttons. | Press #FM+ / *AM–. |
| Repeat play | Press 4 repeatedly to cycle through: TRACK REPEAT/ALL REPEAT (Audio CD), FILE REPEAT/FOLDER REPEAT/ALL REPEAT (MP3/WMA/AAC/WAV/FLAC), FILE REPEAT/FOLDER REPEAT/REPEAT OFF (iPod/Android). | Not available |
| Random play | Press 3 repeatedly to cycle through: DISC RANDOM/RANDOM OFF (Audio CD), FOLDER RANDOM/RANDOM OFF (MP3/WMA/AAC/WAV/FLAC, iPod/Android). | Not available |
| All Random | Press and hold 3 to select ALL RANDOM. | Not available |
Notes:
• For ANDROID, fast-forward/reverse is only applicable when [BROWSE MODE] is selected.
• For CD, folder selection is only for MP3/WMA/AAC files. This does not work for iPod/ANDROID.
• For iPod/ANDROID, repeat and random play are only applicable when [MODE OFF]/[BROWSE MODE] is selected.
How do I browse for files on a connected CD, USB, or Android device with my KENWOOD KDC-X302?
You can browse and search for files on your KENWOOD KDC-X302 using several methods.
Select a file from a folder/list:
1. Press the search button.
2. Turn the volume knob to select a folder/list, then press the knob.
3. Turn the volume knob to select a file, then press the knob.
Quick Search:
If you have many files, turn the volume knob quickly to browse through the list quickly.
Skip Search (iPod USB and ANDROID source):
Press S / T to search at a preset skip search ratio. Pressing and holding searches at a 10% ratio.
Alphabet Search (iPod USB and ANDROID source):
• For iPod USB source: Turn the volume knob quickly to enter character search. Turn the knob to select a character and press S / T to move to the entry position. You can enter up to 3 characters. Press the volume knob to start searching.
• For ANDROID source: Press the Folder Up/Down button to enter character search. Turn the volume knob to select a character. Press the knob to start searching.
How do I use an AUX input with my KENWOOD KDC-X302?
To use an auxiliary audio source with your KENWOOD KDC-X302:
Preparation:
First, enable the AUX source by selecting [ON] for [BUILT-IN AUX] in the [SOURCE SELECT] menu.
Start listening:
1. Connect a portable audio player to the auxiliary input jack using a 3.5 mm stereo mini plug.
2. Press SRC repeatedly to select AUX.
3. Turn on the portable audio player and start playback.
Set the AUX name:
1. While in AUX source, press the volume knob to enter [FUNCTION].
2. Turn the volume knob to select [SYSTEM], then press the knob.
3. Turn the volume knob to select [AUX NAME SET], then press the knob.
4. Turn the volume knob to select a name (AUX, DVD, PORTABLE, GAME, VIDEO, TV), then press the knob.
5. Press and hold the back button to exit.
How do I use Pandora on my KENWOOD KDC-X302?
To use Pandora with your KENWOOD KDC-X302, follow these instructions:
Preparation:
Install the latest version of the Pandora application on your iPhone/iPod touch, create an account, and log in. Enable the Pandora source by selecting [ON] for [PANDORA SRC] in [SOURCE SELECT].
Start Listening:
1. Open the Pandora application on your device.
2. Connect your device to the USB input terminal.
3. Press SRC repeatedly to select PANDORA. Broadcast starts automatically.
Controls:
• Playback/pause: Press the Play/Pause button.
• Skip a track: Press Seek T.
• Thumbs up/thumbs down: Press Folder Up/Down buttons. (If thumbs down is selected, the track is skipped).
Create and save a new station:
1. Press the search button.
2. Turn the volume knob to select [NEW STATION], then press the knob.
3. Turn the volume knob to select [FROM ARTIST] or [FROM TRACK], then press the knob.
4. Press and hold a number button (1 to 5) to store the new station.
Bookmark current song information:
Press and hold the volume knob. “BOOKMARKED” appears. The bookmark is available on your Pandora account, not on this unit.
How do I pair and connect a Bluetooth device to my KENWOOD KDC-X302 for the first time?
To pair your Bluetooth device with the KENWOOD KDC-X302 for the first time:
1. Press SRC to turn on the unit.
2. On your Bluetooth device, search for and select this unit’s model name (e.g., KDC-X3**).
3. The display will show “PAIRING” → “PASS XXXXXX” → Device name → “PRESS” → “VOLUME KNOB”. For some devices, you may need to enter the PIN code immediately after searching.
4. Press the volume knob to start pairing. “PAIRING OK” appears when pairing is complete.
Once pairing is completed, the Bluetooth connection is established automatically. The “BT1” and/or “BT2” indicator on the faceplate will light up.
Auto Pairing with USB Connection:
When you connect an iPhone/iPod touch/Android device to the USB input terminal, a pairing request is automatically activated. Press the volume knob to pair once you have confirmed the device name. This works only if the Bluetooth function of the device is on and [AUTO PAIRING] is set to [ON] in the unit’s settings.
How do I handle phone calls using my KENWOOD KDC-X302?
You can manage phone calls with your KENWOOD KDC-X302 after connecting your phone via Bluetooth.
| Action | On the faceplate |
|---|---|
| First incoming call… | |
| Answer a call | Press the phone button or the volume knob or one of the number buttons (1 to 6). |
| Reject a call | Press the back button. |
| End a call | Press the back button. |
| While talking on the first incoming call… | |
| Answer another incoming call and hold the current call | Press the phone button. |
| Reject another incoming call | Press the back button. |
| While having two active calls… | |
| End current call and activate held call | Press the back button. |
| Swap between the current call and held call | Press the phone button. |
| Adjust the phone volume | Turn the volume knob during a call. ([00] to [35]) |
| Switch between hands-free and private talk modes | Press the play/pause button during a call. |
How can I improve the voice quality during phone calls on my KENWOOD KDC-X302?
To improve the voice quality during a phone call on your KENWOOD KDC-X302, you can adjust the following settings in the [FUNCTION] menu:
1. While talking on the phone, press the volume knob to enter [FUNCTION].
2. Turn the volume knob to select an item from the table below, then press the knob.
3. Repeat step 2 until the desired setting is activated.
4. Press and hold the back button to exit.
| Setting | Value Range (Default) | Description |
|---|---|---|
| MIC GAIN | –10 to +10 (–4) | Adjusts the sensitivity of the microphone. |
| NR LEVEL | –5 to +5 (0) | Adjusts the noise reduction level. |
| ECHO CANCEL | –5 to +5 (0) | Adjusts the echo cancellation delay time. |
How do I make a call using the features of my KENWOOD KDC-X302?
You can make a call from the call history, phonebook, by dialing a number, or by using voice recognition on your KENWOOD KDC-X302.
1. Press the phone button to enter Bluetooth mode.
2. Turn the volume knob to select an item, then press the knob.
CALL HISTORY: Turn the volume knob to select a name or number, then press the knob to call.
PHONE BOOK: Turn the volume knob quickly to enter alphabet search. Select the first letter, then select a name and phone number, and press the knob to call.
NUMBER DIAL: Turn the volume knob to select numbers (0-9) or characters (*, #, +). Press S / T to move the entry position. After entering the number, press the volume knob to call.
VOICE: Speak the name of the contact you want to call.
Make a call using voice recognition:
1. Press and hold the phone button to activate the voice recognition of the connected phone.
2. Speak the name of the contact you want to call or the voice command to control the phone functions.
What Bluetooth settings can I configure on my KENWOOD KDC-X302?
You can configure various Bluetooth settings in the [FUNCTION] menu of your KENWOOD KDC-X302.
| Setting | Description |
|---|---|
| BT MODE | |
| PHONE SELECT / AUDIO SELECT | Selects the phone or audio device to connect or disconnect. “*” appears in front of the device name when connected. A play icon appears in front of the current playback audio device. |
| DEVICE DELETE | Select a device to delete from the paired list. Select [YES] or [NO], then press the knob. |
| PIN CODE EDIT (0000) | Changes the PIN code (up to 6 digits). |
| RECONNECT | ON: The unit automatically reconnects when the last connected Bluetooth device is within range. OFF: Cancels. |
| AUTO PAIRING | ON: The unit automatically pairs with a supported Bluetooth device (iPhone/iPod touch/Android) when it is connected via USB. This may not work depending on the device’s operating system. OFF: Cancels. |
| INITIALIZE | YES: Initializes all Bluetooth settings (including stored pairing, phonebook, etc.). NO: Cancels. |
How do I play audio via Bluetooth on my KENWOOD KDC-X302?
To play audio from a connected Bluetooth device on your KENWOOD KDC-X302:
1. Press SRC repeatedly to select BT AUDIO.
2. Operate the Bluetooth audio player to start playback.
The following controls are available on the faceplate:
| Action | On the faceplate |
|---|---|
| Playback/pause | Press the Play/Pause button. |
| Select group or folder | Press the Folder Up/Down buttons. |
| Reverse/Forward skip | Press Seek S / T. |
| Reverse/Fast-forward | Press and hold Seek S / T. |
| Repeat play | Press 4 repeatedly (ALL REPEAT, FILE REPEAT, REPEAT OFF). |
| Random play | Press and hold 3 to select ALL RANDOM. Press 3 to select RANDOM OFF. |
| Switch between connected Bluetooth audio devices | Press 5. |
What are the general troubleshooting solutions for my KENWOOD KDC-X302?
| Symptom | Remedy |
|---|---|
| Sound cannot be heard. | Adjust the volume to the optimum level. Check the cords and connections. |
| “MISWIRING CHECK WIRING THEN PWR ON” appears. | Turn the power off, then check to be sure the terminals of the speaker wires are insulated properly. Turn the power on again. |
| “PROTECTING SEND SERVICE” appears. | Send the unit to the nearest service center. |
| Sound cannot be heard, the unit does not turn on, or information shown on the display is incorrect. | Clean the connectors. |
| The unit does not work at all. | Reset the unit. |
What should I do if I’m having problems with Radio reception on my KENWOOD KDC-X302?
If you are experiencing poor radio reception or static noise while listening to the radio on your KENWOOD KDC-X302, please check the following:
Ensure the antenna is connected firmly and securely to the unit.
What are some common troubleshooting tips for CD, USB, and iPod playback on my KENWOOD KDC-X302?
| Symptom / Message | Remedy |
|---|---|
| Correct characters are not displayed (e.g. album name). | This unit can only display uppercase letters, numbers, and a limited number of symbols. Depending on the display language you have selected, some characters may not be displayed correctly. |
| Disc cannot be ejected. | Press and hold the eject button to forcibly eject the disc. If this does not solve the problem, reset the unit. |
| “NA FILE” | Make sure the disc contains supported audio files. |
| “NO DISC” | Insert a playable disc into the loading slot. |
| “TOC ERROR” | Make sure the disc is clean and inserted properly. |
| “PLEASE EJECT” | Reset the unit. If this does not solve the problem, consult your nearest service center. |
| “NO DEVICE” | Connect a USB device, and change the source to USB again. |
| “COPY PRO” | A copy-protected file is played. |
| “UNSUPPORTED DEVICE” | Check whether the connected device is compatible with this unit and ensure the file systems are in supported formats. Reattach the device. |
| “UNRESPONSIVE DEVICE” | Make sure the device is not malfunctioning and reattach the device. |
| “USB HUB IS NOT SUPPORTED” | This unit cannot support a USB device connected via a USB hub. |
| Source does not change to “USB” when a USB device is connected while listening to another source, or “USB ERROR” appears. | The USB port is drawing more power than the design limit. Turn the power off and unplug the USB device. Then, turn on the power and reattach the USB device. If this does not solve the problem, reset the unit before replacing with another USB device. |
| “NO MUSIC” | Connect a USB device that contains playable audio files. |
| “iPod ERROR” | Reconnect the iPod. Reset the iPod. |
How do I troubleshoot Android device playback on my KENWOOD KDC-X302?
| Symptom / Message | Remedy |
|---|---|
| Sound cannot be heard during playback or sound output is only from the Android device. | Reconnect the Android device. If in [HAND MODE], launch or relaunch any media player application on the Android device. Restart the Android device. If the problem persists, the connected device may be unable to route the audio signal to the unit. |
| Cannot playback at [BROWSE MODE]. | Make sure KENWOOD MUSIC PLAY APP is installed on the Android device. Reconnect the Android device and select the appropriate control mode. If the problem persists, the connected device may not support [BROWSE MODE]. |
| “NO DEVICE” or “READING” keeps flashing. | Switch off the developer options on the Android device. Reconnect the Android device. If the problem persists, the connected device may not support [BROWSE MODE]. |
| Playback is intermittent or sound skips. | Turn off the power saving mode on the Android device. |
| “ANDROID ERROR”/ “NA DEVICE” | Reconnect the Android device. Restart the Android device. |
Why am I having issues with Pandora, iHeartRadio, or Spotify on my KENWOOD KDC-X302?
| Source | Symptom / Message | Remedy |
|---|---|---|
| Pandora | “NO STATIONS” | No stations are found. |
| “STATION LIMIT” | The number of registered stations has reached its limit. Retry after deleting unnecessary stations from your device. | |
| “CONNECT ERROR” | Communication is unstable. | |
| “ADD ERROR” | New station creation is unsuccessful. | |
| “NO SKIPS” | The skip limit has been reached. | |
| iHeartRadio | iHeartRadio station cannot be selected. | If “Explicit Content” in [Account Settings] is checked in the web version of iHeartRADIO, custom stations become unavailable. |
| Spotify | “DISCONNECTED” | USB is disconnected from the head unit. Please make sure the device is connected properly through USB. |
| “CHECK APP” | The Spotify application is not connected properly, or the user is not logged in. End the Spotify application and restart, then log in to your Spotify account. |
How do I troubleshoot Bluetooth connectivity issues with my KENWOOD KDC-X302?
| Symptom / Message | Remedy |
|---|---|
| No Bluetooth device is detected. | Search from the Bluetooth device again. Reset the unit. |
| Bluetooth pairing cannot be made. | Make sure you have entered the same PIN code to both the unit and Bluetooth device. Delete pairing information from both the unit and the Bluetooth device, then perform pairing again. |
| Echo or noise is heard during a phone conversation. | Adjust the microphone unit’s position. Check the [ECHO CANCEL] setting. |
| Phone sound quality is poor. | Reduce the distance between the unit and the Bluetooth device. Move the car to a place where you can get a better signal reception. |
| Voice calling method is not successful. | Use voice calling method in a more quiet environment. Reduce the distance from the microphone when you speak the name. Make sure the same voice as the registered voice tag is used. |
| Sound is being interrupted or skipped during playback of a Bluetooth audio player. | Reduce the distance between the unit and the Bluetooth audio player. Turn off, then turn on the unit and try to connect again. Other Bluetooth devices might be trying to connect to the unit. |
| The connected Bluetooth audio player cannot be controlled. | Check whether the connected Bluetooth audio player supports Audio/Video Remote Control Profile (AVRCP). Disconnect and connect the Bluetooth player again. |
| “DEVICE FULL” | The number of registered devices has reached its limit. Retry after deleting an unnecessary device. |
| “NOT SUPPORT” | The connected phone does not support Voice Recognition feature or phonebook transfer. |
How should I clean and maintain my KENWOOD KDC-X302?
Proper maintenance will ensure your KENWOOD KDC-X302 continues to function well.
Cleaning the unit:
Wipe off dirt on the faceplate with a dry silicone or soft cloth.
Cleaning the connector:
Detach the faceplate and clean the connector gently with a cotton swab, being careful not to damage the connector.
Handling discs:
• Do not touch the recording surface of the disc.
• Do not stick tape etc. on the disc, or use a disc with tape stuck on it.
• Clean from the center of the disc and move outward.
• Clean the disc with a dry silicone or soft cloth. Do not use any solvents.
• When removing discs from this unit, pull them out horizontally.
• Remove burrs from the center hole and disc edge before inserting a disc.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD KENWOOD KDC-X302 (01) PDF DOCUMENT