Free English KENWOOD KDC-BT778HD (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD KENWOOD KDC-BT778HD (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What are some important precautions I should take when using my KENWOOD KDC-BT778HD?
To ensure proper and safe use of your KENWOOD KDC-BT778HD, please observe the following:
WARNINGS:
• Do not operate any function that takes your attention away from safe driving.
• Do not ingest the battery from the remote control, as it is a Chemical Burn Hazard. Keep new and used batteries away from children. If you suspect a battery has been swallowed, seek immediate medical attention.
CAUTIONS:
• **Volume Setting:** Adjust the volume so you can hear sounds outside the car to prevent accidents. Lower the volume before playing digital sources to avoid sudden loud output that could damage speakers.
• **General:**
• Avoid using any external device if it might hinder safe driving.
• Ensure all important data is backed up. We are not responsible for any loss of recorded data.
• To prevent a short circuit, never put or leave metallic objects (like coins or metal tools) inside the unit.
• If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to evaporate.
• Depending on your car, the antenna may extend automatically when the unit is turned on. Turn off the unit or switch to STANDBY when parking in a low-ceiling area.
How do I perform basic operations on the faceplate of my KENWOOD KDC-BT778HD?
| To | Action on the Faceplate |
|---|---|
| Turn on the power | Press the SRC button. |
| Turn off the power | Press and hold the SRC button. |
| Adjust the volume | Turn the volume knob. |
| Select a source | Press the SRC button repeatedly. Alternatively, press SRC, then turn the volume knob within 2 seconds. |
| Change the display information | Press the DISP button repeatedly. |
How do I reset my KENWOOD KDC-BT778HD?
To reset the unit, first detach the faceplate. Then, use a pointed object to press the reset button. The unit should be reset within 5 seconds of detaching the faceplate.
How do I perform the initial setup on my KENWOOD KDC-BT778HD?
When you turn on the power for the first time, you need to set the display language and cancel the demonstration mode.
1. The display shows “SEL LANGUAGE”. Turn the volume knob to select [ENG] (English), [SPA] (Spanish), or [FRE] (French), then press the knob.
2. The display then shows “CANCEL DEMO”. Press the volume knob.
3. [YES] is selected for the initial setup. Press the volume knob again. “DEMO OFF” appears, and the setup is complete.
How do I set the clock and date on my KENWOOD KDC-BT778HD?
1. Press the volume knob to enter the [FUNCTION] menu.
2. Turn the volume knob to select [CLOCK], then press the knob.
To adjust the clock:
3. Turn the volume knob to select [CLOCK ADJUST], then press the knob.
4. Turn the volume knob to set the “Hour” and then the “Minute”, pressing the knob after each selection.
5. To set the format, turn the volume knob to select [CLOCK FORMAT], then press the knob.
6. Turn the volume knob to select [12H] or [24H], then press the knob.
To set the date:
7. In the [CLOCK] menu, turn the volume knob to select [DATE FORMAT], then press the knob.
8. Turn the volume knob to select [DD/MM/YY] or [MM/DD/YY], then press the knob.
9. Turn the volume knob to select [DATE SET], then press the knob.
10. Turn the volume knob to set the “Day”, “Month”, and “Year” in order, pressing the knob after each selection.
11. Press and hold the back button to exit.
How do I change the optional settings on my KENWOOD KDC-BT778HD?
You can adjust various settings when the unit is in STANDBY source. First, press SRC repeatedly to enter STANDBY.
1. Press the volume knob to enter [FUNCTION].
2. Turn the volume knob to select an item from the table below, then press the knob.
3. Repeat step 2 until the desired item is selected or activated.
4. Press and hold the back button to exit.
| Setting Category | Item | Selectable Value |
|---|---|---|
| [DISPLAY] | [EASY MENU] | [ON]: [ZONE 1] illumination changes to white color when entering [FUNCTION]. [OFF]: [ZONE 1] illumination remains as the selected color. |
| [TUNER SETTING] | [PRESET TYPE] | [NORMAL]: Memorizes one station for each preset button in each band (FM1/FM2/FM3/AM). [MIX]: Memorizes one station or SiriusXM channel for each preset button, regardless of the selected band. |
| [SYSTEM] | [KEY BEEP] | [ON]: Activates the keypress tone. [OFF]: Deactivates. |
| [SOURCE SELECT] | [PANDORA SRC] | [ON]: Enables PANDORA in source selection. [OFF]: Disables. |
| [SPOTIFY SRC] | [ON]: Enables SPOTIFY in source selection. [OFF]: Disables. | |
| [BT AUDIO SRC] | [ON]: Enables BT AUDIO in source selection. [OFF]: Disables. | |
| [BUILT-IN AUX] | [ON]: Enables AUX in source selection. [OFF]: Disables. | |
| [CD READ] | [1]: Automatically distinguishes between audio file disc and music CD. [2]: Forces to play as a music CD. No sound can be heard if an audio file disc is played. |
|
| [F/W UPDATE] | [UPDATE SYSTEM]/[UPDATE HD] | [YES]: Starts upgrading the firmware. [NO]: Cancels upgrading. |
| [FACTORY RESET] | [YES]: Resets the settings to default (except stored stations). [NO]: Cancels. |
|
| [LANGUAGE] | Selects the display language ([ENGLISH], [ESPANOL], [FRANCAIS]). |
How do I listen to HD Radio™ on my KENWOOD KDC-BT778HD?
Search for a station:
1. Press SRC repeatedly to select HD RADIO.
2. Press BAND repeatedly to select FM1/FM2/FM3/AM.
3. Press the seek buttons to search for a station or channel.
Store a station or channel: Press and hold one of the number buttons (1 to 6).
Select a stored station or channel: Press one of the number buttons (1 to 6).
Select an HD Radio multicast channel: While receiving HD Radio multicast channels, press the seek buttons to select your desired channel (HD1 to HD8).
How do I manage Emergency Alert messages for HD Radio™ on my KENWOOD KDC-BT778HD?
Activate emergency alert message reception:
1. Press the volume knob to enter [FUNCTION].
2. Turn the knob to select [TUNER SETTING], then press it.
3. Turn the knob to select [EA], then press it.
4. Turn the knob to select [ON], then press it.
5. Press and hold the back button to exit. To deactivate, select [OFF] in step 4.
Receive an emergency alert message:
When an alert is received, it appears on the display. Press SRC to ignore the alert message. The same message will not interrupt again for 12 hours.
Display received emergency alert messages:
While listening to the HD RADIO source:
1. Press the back button to display the Alert Message List.
2. Turn the volume knob to select a message.
3. Press the volume knob to display the information related to the message.
4. Press the back button again to exit.
How do I operate the CD, USB, and iPod sources on my KENWOOD KDC-BT778HD?
Playback Controls:
| Action | On the Faceplate |
|---|---|
| Play back/pause | Press the button with number 6. |
| Reverse/Fast-forward | Press and hold the seek buttons. |
| Select a track/file | Press the seek buttons. |
| Select a folder (CD/USB) | Press the up/down arrow buttons (2 / 1). |
| Repeat play | Press the button with number 4 repeatedly. Options vary by source. |
| Random play | Press the button with number 3 repeatedly. Options vary by source. |
Select a music drive (for USB devices with multiple drives):
1. While in USB source, press the button with number 5 repeatedly.
Alternatively, you can select from the [FUNCTION] menu under [USB] > [MUSIC DRIVE] > [DRIVE CHANGE].
Select control mode (for iPod):
While in iPod USB source, press the button with number 5 repeatedly to switch between modes:
• [MODE ON]: Control iPod/iPhone from the device itself.
• [MODE OFF]: Control iPod/iPhone from the KENWOOD KDC-BT778HD unit.
How do I search for a file to play from a CD or USB device on my KENWOOD KDC-BT778HD?
From a folder or list:
1. Press the Search button.
2. Turn the volume knob to select a folder/list, then press the knob.
3. Turn the volume knob to select a file, then press the knob to start playing.
Quick search (CD/USB):
If you have many files, you can search through them quickly.
1. Press the Search button.
2. Turn the volume knob to select a folder/list, then press the knob.
3. Turn the volume knob quickly to browse through the list quickly.
4. Turn the volume knob to select a file, then press the knob.
How do I use Pandora® on my KENWOOD KDC-BT778HD?
First, install the latest Pandora application on your device, create an account, and log in. Also, enable [PANDORA SRC] in the [SOURCE SELECT] menu.
Start listening:
1. Start the Pandora application on your device.
2. Connect your iPhone/iPod touch to the USB input terminal, or connect your iPhone/Android device via Bluetooth.
3. Press SRC repeatedly to select PANDORA or PANDORA BT.
Playback Controls:
| Action | On the Faceplate |
|---|---|
| Play back/pause | Press the button with number 6. |
| Skip a track | Press the right seek button. |
| Thumbs up/down | Press the up/down arrow buttons (2 / 1). |
Create and store a new station:
1. Press the Search button.
2. Turn the volume knob to select [NEW STATION], then press the knob.
3. Select [FROM ARTIST] or [FROM TRACK], then press the knob. A new station is created.
4. To save it, press and hold one of the number buttons (3, 4, or 5).
Bookmark current song information: Press and hold the volume knob. “BOOKMARKED” appears.
How do I use Spotify on my KENWOOD KDC-BT778HD?
First, install the latest Spotify application on your device, create an account, and log in. Also, enable [SPOTIFY SRC] in the [SOURCE SELECT] menu.
Start listening:
1. Start the Spotify application on your device.
2. Connect your iPhone/iPod touch to the USB input terminal, or connect your iPhone/Android device via Bluetooth.
3. Press SRC repeatedly to select SPOTIFY or SPOTIFY BT.
Playback Controls:
| Action | On the Faceplate |
|---|---|
| Play back/pause | Press the button with number 6. |
| Skip a track | Press the seek buttons. |
| Thumbs up/down (Radio only) | Press the up/down arrow buttons (2 / 1). |
| Start radio | Press and hold the button with number 5. |
Save favorite song information (Radio only): Press and hold the volume knob. “SAVED” appears. To unsave, repeat the procedure.
How do I listen to SiriusXM® Radio on my KENWOOD KDC-BT778HD?
A SiriusXM Vehicle Tuner and subscription are required.
Preparation:
1. Connect the optional SiriusXM Vehicle Tuner.
2. Check your Radio ID for activation by tuning to Channel 0.
3. Activate the subscription online or by phone.
4. Press SRC repeatedly to select SIRIUS XM to start updating.
Start Listening:
1. Press SRC repeatedly to select SIRIUS XM.
2. Press BAND repeatedly to select a band.
3. Press the Search button. The “Q” indicator lights up.
4. Turn the volume knob to select a category, then press the knob.
5. Turn the volume knob to select a channel, then press the knob. Or, press the seek buttons to search for a channel manually.
What are SmartFavorites and TuneScan™ for SiriusXM® on my KENWOOD KDC-BT778HD?
SmartFavorites and TuneStart™:
User-stored channels are recognized as SmartFavorite channels. The SiriusXM Tuner automatically buffers the broadcast content in the background. When you select a SmartFavorite channel (by pressing a number button 1-6), you can rewind and replay up to 30 minutes of missed content. If [TUNE START] is ON, playback will start from the beginning of the song for most music channels.
TuneScan™:
This feature gives you a short preview of songs you have missed on your SmartFavorites music channels.
• Press and hold BAND to start scanning the first 6 seconds of the recorded music.
• To listen to the current song, press the volume knob to stop scanning.
• To select the previous/next song, press the seek buttons.
• To cancel scanning, press and hold the volume knob.
How do I pair and connect a Bluetooth device for the first time with my KENWOOD KDC-BT778HD?
1. Press SRC to turn on the unit.
2. On your Bluetooth device, search for and select “KDC-BT778HD”.
3. The display on the receiver will show “PAIRING”, a passkey, the device name, and “PRESS VOLUME KNOB”. For some devices, you may need to enter a PIN code immediately after searching.
4. Press the volume knob on the receiver to start pairing. “PAIRING OK” appears when completed, and the connection is established automatically. “BT1” and/or “BT2” indicators will light up on the faceplate.
How do I handle phone calls using my KENWOOD KDC-BT778HD?
| Situation | Action to Take |
|---|---|
| Answer an incoming call | Press the Phone button, the volume knob, or one of the number buttons (1 to 6). |
| Reject an incoming call | Press the back button. |
| End a call | Press the back button. |
| Answer a second incoming call (and hold the first) | Press the Phone button. |
| Reject a second incoming call | Press the back button. |
| End the current call and activate the held call | Press the back button. |
| Swap between the current and held calls | Press the Phone button. |
| Adjust the phone volume | Turn the volume knob during a call. |
| Switch between hands-free and private talk modes | Press the button with number 6 during a call. |
How can I improve the voice quality during a phone call on my KENWOOD KDC-BT778HD?
While on a phone call, you can adjust settings to improve audio quality.
1. Press the volume knob to enter [FUNCTION].
2. Turn the volume knob to select an item, then press the knob to adjust.
• [MIC GAIN]: Adjusts microphone sensitivity from [LEVEL -10] to [LEVEL +10].
• [NR LEVEL]: Adjusts the noise reduction level from [LEVEL -5] to [LEVEL +5].
• [ECHO CANCEL]: Adjusts the echo cancellation delay time from [LEVEL -5] to [LEVEL +5].
3. Press and hold the back button to exit when you are done.
How do I make a call using my KENWOOD KDC-BT778HD?
1. Press the Phone button to enter Bluetooth mode.
2. Turn the volume knob to select a calling method, then press the knob:
• [CALL HISTORY]: Select a name or number from your recent calls, then press the knob to call.
• [PHONE BOOK]: Turn the knob quickly to enter alphabet search. Select a letter, then a name, then a phone number, and press the knob to call.
• [NUMBER DIAL]: Turn the knob to select numbers, use the seek buttons to move the entry position, then press the knob to call.
• [VOICE]: Press and hold the Phone button to activate your phone’s voice recognition. Speak the name of the contact you want to call.
How do I use Amazon Alexa with my KENWOOD KDC-BT778HD?
First-Time Setup:
1. Pair your Android or iPhone/iPod touch with the unit via Bluetooth.
2. Start the Alexa mobile application on your device.
3. On the Alexa app’s SETUP section, search for and select “KDC-BT778HD” to complete the one-time setup process.
Basic Operations:
Once the connection is established:
1. Press the Alexa button (voice button) on the unit to speak with Alexa. The display shows “LISTENING…”.
2. Communicate with Alexa via the connected microphone. “THINKING…” appears while processing, and “SPEAKING…” appears while responding.
• To return to the previous source, press SRC.
• To cancel the current state, press the Alexa button.
How do I adjust the Audio Settings on my KENWOOD KDC-BT778HD?
1. Press the volume knob to enter [FUNCTION].
2. Turn the volume knob to select an item, then press the knob to enter its submenu.
3. Turn the knob to change the value or setting, and press to confirm.
4. Press and hold the back button to exit.
Key audio settings include:
• [AUDIO CONTROL] > [MANUAL EQ]: Adjust individual frequency bands.
• [AUDIO CONTROL] > [PRESET EQ]: Select a preset equalizer like [ROCK], [POPS], etc.
• [AUDIO CONTROL] > [BASS BOOST]: Selects your preferred bass boost level.
• [AUDIO CONTROL] > [FADER]/[BALANCE]: Adjust speaker output balance.
• [SOUND EFFECT]: Access features like [SOUND RECNSTR], [SPACE ENHANCE], [SND REALIZER], [STAGE EQ], and [DRIVE EQ].
• [SPEAKER SIZE]: Select the size of your connected speakers for optimum performance.
• [X’ OVER]: Configure crossover frequencies and slopes for tweeters, front, rear, and subwoofer outputs.
• [DTA SETTINGS]: Set Digital Time Alignment by selecting your listening position and adjusting speaker distances and gains.
How do I change the display and illumination settings on my KENWOOD KDC-BT778HD?
1. Press the volume knob to enter [FUNCTION].
2. Turn the knob to select [DISPLAY], then press the knob.
3. Turn the knob to select an item to adjust, then press the knob.
[COLOR SELECT]:
• Selects illumination colors for [ALL ZONE], [ZONE 1], and [ZONE 2] separately. Choose from preset colors or select [CUSTOM R/G/B] to create your own color by adjusting Red, Green, and Blue levels from 0 to 9.
[DIMMER]:
• Select [ON] or [OFF]. You can also set a [DIMMER TIME] for it to turn on and off automatically.
[BRIGHTNESS]:
• Sets the brightness for [DAY] and [NIGHT] separately for different zones. Adjust the level from [LVL00] to [LVL31].
[TEXT SCROLL]:
• [ONCE]: Scrolls the display information once.
• [AUTO]: Repeats scrolling at 5-second intervals.
• [OFF]: Cancels scrolling.
How do I clean my KENWOOD KDC-BT778HD?
Cleaning the unit:
Wipe off dirt on the faceplate with a dry silicone or soft cloth.
Cleaning the connector:
Detach the faceplate and gently clean the connector on the reverse side with a cotton swab. Be careful not to damage the connector.
What should I do if the sound cannot be heard from my KENWOOD KDC-BT778HD?
If sound cannot be heard, please check the following:
• Adjust the volume to the optimum level.
• Check the wiring cords and connections to ensure they are secure.
• If the unit does not turn on, check and clean the connectors.
Why does “MISWIRING CHECK WIRING THEN PWR ON” appear on my KENWOOD KDC-BT778HD?
This message indicates a wiring issue. Turn the power off, then check to be sure the terminals of the speaker wires are insulated properly. Turn the power on again after confirming the wiring is correct.
Why can’t I select a source on my KENWOOD KDC-BT778HD?
The source may be disabled in the settings. Check the [SOURCE SELECT] setting in the [FUNCTION] menu to ensure the source you want to use (e.g., PANDORA, SPOTIFY, AUX) is enabled.
What should I do if my KENWOOD KDC-BT778HD doesn’t work at all?
If the unit is completely unresponsive, try resetting it. Detach the faceplate and press the reset button.
Why does the radio reception seem poor on my KENWOOD KDC-BT778HD?
If you are experiencing poor radio reception or static noise, ensure the vehicle’s antenna is connected firmly to the back of the unit.
What should I do if my iPod/iPhone does not turn on or work with the KENWOOD KDC-BT778HD?
First, check the connection between the unit and your iPod/iPhone. If the connection is secure, try disconnecting and resetting the iPod/iPhone using a hard reset, then reconnect it.
Why is Bluetooth pairing failing on my KENWOOD KDC-BT778HD?
If you are unable to pair a Bluetooth device, try the following:
• Make sure you have entered the same PIN code on both the unit and the Bluetooth device if prompted.
• Delete pairing information from both the KENWOOD KDC-BT778HD unit and the Bluetooth device, then perform the pairing process again.
Why is there echo or noise during a phone call on my KENWOOD KDC-BT778HD?
If you hear an echo or noise during a call, try these adjustments:
• Adjust the microphone unit’s position. Ensure it is aimed toward you and away from any sources of noise.
• Check and adjust the [ECHO CANCEL] setting in the [FUNCTION] menu during a call.
How can I fix poor phone sound quality on my KENWOOD KDC-BT778HD?
To improve phone sound quality, try the following:
• Reduce the distance between the unit and the Bluetooth device.
• Move the car to a place where you can get a better cellular signal reception.
What does the “DISCONNECTED” error mean for Amazon Alexa on my KENWOOD KDC-BT778HD?
This message means the unit is disconnected from the Alexa mobile application or the Bluetooth connection is lost. Be sure to connect your smartphone to the unit via Bluetooth.
Why am I not able to connect or reconnect to the Alexa mobile application on my KENWOOD KDC-BT778HD?
If you are having trouble with the Alexa connection, please try these steps:
• Ensure the audio device is connected via Bluetooth. You can select the device from [AUDIO SELECT] in the [BT MODE] settings.
• Perform the one-time setup process again.
• Turn off the unit, then turn it on again and try to connect.
• For an iOS device, make sure the Alexa source or iPod BT source is selected on the KENWOOD KDC-BT778HD.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD KENWOOD KDC-BT778HD (01) PDF DOCUMENT