Free English KENWOOD KDC-MP372BT (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD KENWOOD KDC-MP372BT (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What are the basic operations of the KENWOOD KDC-MP372BT?
The basic operations for the faceplate and remote control of your KENWOOD KDC-MP372BT are as follows:
| To | On the faceplate | On the remote control |
|---|---|---|
| Turn on the power | Press SRC. Press and hold to turn off the power. | Press and hold SRC to turn off the power. (Pressing SRC does not turn on the power.) |
| Adjust the volume | Turn the volume knob. | Press VOL ^ or VOL v. Press and hold VOL ^ to continuously increase the volume to 15. Press ATT during playback to attenuate the sound. Press again to cancel. |
| Select a source | Press SRC repeatedly. | Press SRC repeatedly. |
| Change the display information | Press DISP repeatedly. | (Not available) |
For KMR-D372BT: The power will automatically turn off after 20 minutes when in standby mode (Auto Power Off).
For KDC-MP372BT: You can also turn off the display information by pressing DISP repeatedly.
How do I perform the initial setup on my KENWOOD KDC-MP372BT?
Select the display language and cancel the demonstration:
When you turn on the power for the first time (or after a factory reset), the display shows: “SEL LANGUAGE” -> “PRESS” -> “VOLUME KNOB”.
1. Turn the volume knob to select [ENG] (English) or [SPA] (Spanish), then press the knob. [ENG] is selected for the initial setup.
2. Then, the display shows: “CANCEL DEMO” -> “PRESS” -> “VOLUME KNOB”.
3. Press the volume knob. [YES] is selected for the initial setup.
4. Press the volume knob again. “DEMO OFF” appears.
Set the clock and date:
1. Press the volume knob to enter [FUNCTION].
2. Turn the volume knob to select [CLOCK], then press the knob.
3. To adjust the clock, turn the volume knob to select [CLOCK ADJUST], then press the knob. Make the settings for Hour and Minute, pressing the knob after each.
4. To set the clock format, turn the volume knob to select [CLOCK FORMAT], press the knob, and select [12H] or [24H].
5. To set the date, turn the volume knob to select [DATE FORMAT], press the knob, and select [DD/MM/YY] or [MM/DD/YY].
6. Turn the volume knob to select [DATE SET], press the knob, and make the settings for Day, Month, and Year.
7. Press and hold the back button to exit.
Set the initial settings:
1. Press SRC repeatedly to enter STANDBY.
2. Press the volume knob to enter [FUNCTION].
3. Turn the volume knob to select an item from the table below, then press the knob.
4. Repeat step 3 until the desired item is selected or activated.
5. Press and hold the back button to exit.
What are the initial settings I can configure on the KENWOOD KDC-MP372BT?
You can configure the following initial settings on your KENWOOD KDC-MP372BT. The default setting is indicated by bold text.
| Category | Setting | Options |
|---|---|---|
| AUDIO CONTROL | SWITCH PREOUT | REAR/SUBWOOFER or REAR/SUB-W: Selects whether rear speakers or a subwoofer are connected to the line out terminals on the rear. |
| DISPLAY | EASY MENU | ON: ZONE 1 illumination changes to white color when entering [FUNCTION]. OFF: ZONE 1 illumination remains as [COLOR SELECT] color. |
| TUNER SETTING | PRESET TYPE | NORMAL: Memorizes one station for each preset button in each band (FM1/FM2/FM3/AM). MIX: Memorizes one station or SiriusXM channel for each preset button, regardless of the selected band or SiriusXM channel. |
| SYSTEM | KEY BEEP | ON: Activates the keypress tone. OFF: Deactivates. |
| USER S.REMO | (For KDC-MP372BT) See details on steering remote control. | |
| F/W UPDATE | YES: Starts upgrading the firmware. NO: Cancels. |
|
| FACTORY RESET | YES: Resets the settings to default (except the stored station). NO: Cancels. |
|
| SOURCE SELECT | PANDORA SRC | ON: Enables PANDORA in source selection. OFF: Disables. |
| IHEART SRC | ON: Enables IHEARTRADIO in source selection. OFF: Disables. |
|
| SPOTIFY SRC | ON: Enables SPOTIFY in source selection. OFF: Disables. |
|
| BUILT-IN AUX | ON: Enables AUX in source selection. OFF: Disables. |
|
| CD READ | 1: Automatically distinguishes between audio file disc and music CD. 2: Forces to play as a music CD. |
|
| CLOCK | CLOCK DISPLAY | ON: The clock time is shown on the display even when the unit is turned off. OFF: Cancels. |
| ENGLISH/ESPANOL | Select the display language. By default, [ENGLISH] is selected. |
How do I use the radio tuner on my KENWOOD KDC-MP372BT?
Search for a station:
1. Press SRC repeatedly to select RADIO.
2. Press BAND repeatedly (or press #FM+ / *AM- on the remote control) to select FM1/FM2/FM3/AM.
3. Press the track buttons (or the track buttons on the remote control) to search for a station.
To change the searching method, press SEEK repeatedly:
AUTO1: Automatically search for a station.
AUTO2: Search for a preset station.
MANUAL: Manually search for a station.
To store a station, press and hold one of the number buttons (1 to 6).
To select a stored station, press one of the number buttons (1 to 6).
Direct Access Tuning (using the remote control):
1. Press DIRECT to enter Direct Access Tuning.
2. Press the number buttons to enter a frequency.
3. Press ENT to search for a station.
To cancel, press the back button or DIRECT.
What are the other radio settings on the KENWOOD KDC-MP372BT?
To access other radio settings, press the volume knob to enter [FUNCTION], select an item, and follow the instructions. Press and hold the back button to exit.
| Setting | Description (Default is bold) |
|---|---|
| AUTO MEMORY | YES: Automatically starts memorizing 6 stations with good reception. NO: Cancels. |
| MONO SET | ON: Improves the FM reception, but the stereo effect may be lost. OFF: Cancels. |
| NEWS SET (For KDC-MP372BT) | ON: The unit will temporarily switch to News Programme if available. OFF: Cancels. |
| REGIONAL (For KDC-MP372BT) | ON: Switches to another station only in the specific region using the “AF” control. OFF: Cancels. |
| AF SET (For KDC-MP372BT) | ON: Automatically searches for another station broadcasting the same program in the same Radio Data System network with better reception when the current reception is poor. OFF: Cancels. |
| TI | ON: Allows the unit to temporarily switch to Traffic Information if available. OFF: Cancels. |
| PTY SEARCH | Searches for a program by type. For the KDC-MP372BT, you first select the Program Type, then the PTY language (ENGLISH/FRENCH/GERMAN), and then press the track buttons to search. |
| TIME SYNC | ON: Synchronizes the unit’s time to the Radio Broadcast Data System station time. OFF: Cancels. |
How do I control playback from CD, USB, iPod, or Android devices on the KENWOOD KDC-MP372BT?
When you connect a device or insert a CD, the source changes automatically and playback starts. The following controls are available:
| Function | On the faceplate | On the remote control |
|---|---|---|
| Playback/pause | Press the play/pause button. | Press ENT. |
| Reverse/Fast-forward | Press and hold the track buttons. | Press and hold the track buttons. |
| Select a track/file | Press the track buttons. | Press the track buttons. |
| Select a folder (CD/USB) | Press the up/down buttons. | Press #FM+ / *AM-. |
| Repeat play | Press 4 repeatedly. Audio CD: TRACK REPEAT/ALL REPEAT MP3/WMA etc.: FILE REPEAT/FOLDER REPEAT/ALL REPEAT iPod/ANDROID: FILE REPEAT/FOLDER REPEAT/REPEAT OFF |
– |
| Random play | Press 3 repeatedly. Audio CD: DISC RANDOM/RANDOM OFF MP3/WMA etc., iPod/ANDROID: FOLDER RANDOM/RANDOM OFF |
– |
| All Random | Press and hold 3 to select ALL RANDOM. | – |
For ANDROID, Reverse/Fast-forward is only applicable when [BROWSE MODE] is selected.
How do I navigate and search for files on a USB, iPod, or Android device with my KENWOOD KDC-MP372BT?
Select a file from a folder/list:
1. Press the search button.
2. Turn the volume knob to select a folder/list, then press the knob.
3. Turn the volume knob to select a file, then press the knob.
Quick Search (CD, USB, ANDROID):
If you have many files, turn the volume knob quickly to browse through the list quickly.
Skip Search (iPod USB, ANDROID):
Press the track buttons to search at a preset skip search ratio. Pressing and holding searches at a 10% ratio.
Alphabet Search (iPod USB, ANDROID):
For iPod USB source:
1. Turn the volume knob quickly to enter character search.
2. Turn the volume knob to select the character.
3. Press the track buttons to move to the entry position (up to 3 characters).
4. Press the volume knob to start searching.
For ANDROID source:
1. Press the up/down buttons to enter character search.
2. Turn the volume knob to select the character (^A^: Upper case, _A_: Lower case, -0-: Numbers, ***: Other).
3. Press the volume knob to start searching.
How do I use the AUX input on my KENWOOD KDC-MP372BT?
First, ensure [BUILT-IN AUX] is set to [ON] in the [SOURCE SELECT] menu.
Start listening:
1. Connect a portable audio player to the auxiliary input jack using a 3.5 mm stereo mini plug.
2. Press SRC repeatedly to select AUX.
3. Turn on the portable audio player and start playback.
Set the AUX name:
1. While in AUX source, press the volume knob to enter [FUNCTION].
2. Turn the volume knob to select [SYSTEM], then press the knob.
3. Turn the volume knob to select [AUX NAME SET], then press the knob.
4. Turn the volume knob to select a name (AUX, DVD, PORTABLE, GAME, VIDEO, TV), then press the knob.
5. Press and hold the back button to exit.
How do I operate Pandora, iHeartRadio, or Spotify on my KENWOOD KDC-MP372BT?
For all services, you must first install the latest version of the respective application on your device, create an account, and log in. Also, ensure the corresponding source (e.g., [PANDORA SRC]) is set to [ON] in the [SOURCE SELECT] menu.
Pandora:
1. Open the Pandora app on your device.
2. Connect your device to the USB input terminal.
3. Press SRC repeatedly to select PANDORA. Playback starts automatically.
Controls include Play/Pause, Skip a track, and Thumbs up/down.
iHeartRadio:
1. Open the iHeartAuto app on your device.
2. Connect your device to the USB input terminal.
3. Press SRC repeatedly to select IHEARTRADIO. Playback starts automatically.
Controls include Play/Pause, Skip a track (custom stations), Thumbs up/down, and Scan for live stations.
Spotify:
1. Open the Spotify app on your device.
2. Connect your device to the USB input terminal.
3. Press SRC repeatedly to select SPOTIFY. Playback starts automatically.
Controls include Play/Pause, Skip a track, Thumbs up/down, Start radio, and Repeat/Random play (availability depends on account type and playlist).
How do I use SiriusXM Radio on my KENWOOD KDC-MP372BT?
Preparation:
1. Connect an optional SiriusXM Vehicle Tuner (sold separately).
2. Check your Radio ID for activation by tuning to Channel 0.
3. Activate the subscription.
4. Press SRC repeatedly to select SIRIUS XM to start updating.
Start listening:
1. Press SRC repeatedly to select SIRIUS XM.
2. Press BAND repeatedly to select a band.
3. Press the search button.
4. Turn the volume knob to select a category, then press the knob.
5. Turn the volume knob to select a channel, then press the knob. Alternatively, press the track buttons to search manually.
SiriusXM Keymode: Press and hold SEEK to change between channel keymode and replay keymode. The “GO” icon lights up for replay keymode.
SmartFavorites and TuneStart: User-stored channels act as SmartFavorites, buffering content. When you select a SmartFavorite channel, playback starts from the beginning of the song if TuneStart is ON.
TuneScan: Press and hold BAND to scan the first 6 seconds of missed songs on your SmartFavorite channels.
How do I pair and connect a Bluetooth device to my KENWOOD KDC-MP372BT?
First Time Pairing:
1. Connect the included microphone to the microphone input terminal on the rear of the unit.
2. Press SRC to turn on the unit.
3. On your Bluetooth device, search for and select the unit’s model name.
4. “PAIRING” -> “PASS XXXXXX” -> Device name -> “PRESS” -> “VOLUME KNOB” appears on the display.
5. Press the volume knob to start pairing. “PAIRING OK” appears when pairing is completed, and the connection is established automatically.
Auto Pairing:
When you connect an iPhone/iPod touch/Android device to the USB input terminal, a pairing request is automatically activated if the Bluetooth function is ON and [AUTO PAIRING] is set to [ON]. Press the volume knob to pair.
How do I make and receive phone calls using Bluetooth on the KENWOOD KDC-MP372BT?
Receiving a call:
To answer an incoming call, press the phone button, the volume knob, or one of the number buttons (1 to 6).
To reject a call, press the back button.
To end a call, press the back button.
Making a call:
1. Press the phone button to enter Bluetooth mode.
2. Turn the volume knob to select an option ([CALL HISTORY], [PHONE BOOK], [NUMBER DIAL], [VOICE]), then press the knob.
3. Follow the on-screen instructions to select a contact or dial a number, then press the volume knob to call.
Using Voice Recognition:
1. Press and hold the phone button to activate the voice recognition of the connected phone.
2. Speak the name of the contact you want to call or the voice command.
How do I play Bluetooth audio on my KENWOOD KDC-MP372BT?
1. Press SRC repeatedly to select BT AUDIO.
2. Operate the Bluetooth audio player to start playback.
The following controls are available on the faceplate and remote:
| To | On the faceplate | On the remote control |
|---|---|---|
| Playback/pause | Press the play/pause button. | Press ENT. |
| Select group or folder | Press the up/down buttons. | Press #FM+ / *AM-. |
| Reverse/Forward skip | Press the track buttons. | Press the track buttons. |
| Reverse/Fast-forward | Press and hold the track buttons. | Press and hold the track buttons. |
How do I adjust the audio settings on my KENWOOD KDC-MP372BT?
While listening to any source, press the volume knob to enter [FUNCTION], or press AUD on the remote to enter [AUDIO CONTROL]. Navigate the menus to adjust the settings below.
| Setting | Description |
|---|---|
| SUB-W LEVEL | Adjusts the subwoofer output level (-50 to +10). |
| MANUAL EQ | Adjusts individual frequency bands (62.5Hz to 16kHz), Q factor, and extended bass. |
| PRESET EQ | Selects a preset equalizer (NATURAL, ROCK, POPS, etc.). |
| BASS BOOST | Selects a bass boost level (LEVEL1 to LEVEL5). |
| LOUDNESS | Selects a loudness level (LEVEL1/LEVEL2) to boost low and high frequencies at low volume. |
| SUBWOOFER SET | Turns the subwoofer output ON or OFF. |
| FADER/BALANCE | Adjusts front/rear and left/right speaker balance. |
| VOLUME OFFSET | Presets the initial volume level for each source. |
| SOUND RECNSTR | Compensates high-frequency components lost in audio compression. |
| SPEAKER SIZE | Selects the size of your front, rear, and subwoofer speakers for optimum performance. |
| X ‘ OVER | Adjusts crossover frequency, slope, and gain for tweeters, front speakers (HPF), rear speakers (HPF), and subwoofer (LPF). |
| DTA SETTINGS | Adjusts Digital Time Alignment by setting your listening position, speaker distance, and gain to create a more suitable sound environment. |
How can I adjust the display settings of my KENWOOD KDC-MP372BT?
To change display settings, press the volume knob to enter [FUNCTION].
| Setting | Description |
|---|---|
| COLOR SELECT | Select color for ALL ZONE, ZONE 1, and ZONE 2 separately. You can choose from preset colors or create a custom R/G/B color. |
| DIMMER | Turns the illumination dimmer ON or OFF. You can also set a DIMMER TIME for it to turn on and off automatically. |
| BRIGHTNESS | Select a zone, then select a brightness level from 0 to 31. |
| TEXT SCROLL | Select whether to scroll display information automatically (AUTO), scroll only once (ONCE), or not at all (OFF). |
You can also press and hold DISP (DIMMER) to turn the dimmer on or off directly.
How do I set up the steering wheel remote control with my KENWOOD KDC-MP372BT?
This feature is only available for the KDC-MP372BT model and requires a compatible electrical steering remote control in your vehicle.
Configure the control keys:
1. Press SRC repeatedly to enter STANDBY.
2. Press the volume knob to enter [FUNCTION].
3. Turn the volume knob to select [SYSTEM], then press the knob.
4. Turn the volume knob to select [USER S.REMO], then press the knob.
5. Turn the volume knob to select [SET KEY], then press the knob. A key list of 16 assignable keys appears.
6. Turn the volume knob to select any key from the list to assign the function, then press the knob. The display shows “PRESS KEY TO ASSIGN K##”.
7. Press and hold the control key on your steering remote that you want to assign.
8. A list of functions will appear (MUTE, SEEK UP/DOWN, VOL UP/DOWN, etc.). Turn the volume knob to select a function to assign, then press the knob.
9. Repeat steps 6-8 to assign other control keys.
10. Press and hold the back button to exit.
To reassign/reset the control keys:
Follow steps 1-4 above, then select [RESET KEY]. Select [YES] and press the knob to reset all control keys.
What should I do if the sound cannot be heard from my KENWOOD KDC-MP372BT?
If sound cannot be heard from your KENWOOD KDC-MP372BT, please try the following:
Adjust the volume to the optimum level.
Check the cords and connections.
If the unit does not turn on or information on the display is incorrect, try cleaning the connectors on the back of the faceplate.
What does the “MISWIRING CHECK WIRING THEN PWR ON” message mean on my KENWOOD KDC-MP372BT?
This message indicates a wiring issue. Turn the power off, then check to be sure the terminals of the speaker wires are insulated properly. Turn the power on again after checking.
Why does my KENWOOD KDC-MP372BT not work at all?
If the unit is completely unresponsive, try resetting the unit. There is a small reset button on the faceplate that can be pressed with a pointed object.
Why can’t I eject a disc from my KENWOOD KDC-MP372BT?
Press and hold the eject button to forcibly eject the disc. Be careful not to drop the disc when it is ejected. If this does not solve the problem, reset the unit.
Why do tracks not play back in the order I intended on my KENWOOD KDC-MP372BT?
The playback order is determined when the files are recorded onto the disc or USB device, not by how they are sorted on a computer.
Why can’t I playback from my Android device in [BROWSE MODE] on the KENWOOD KDC-MP372BT?
If you cannot play back in [BROWSE MODE], please check the following:
Make sure the KENWOOD MUSIC PLAY APP is installed on the Android device.
Reconnect the Android device and select the appropriate control mode.
Switch off the developer options on the Android device.
If the problem persists, the connected Android device may not support [BROWSE MODE].
Why can’t I pair my Bluetooth device with the KENWOOD KDC-MP372BT?
If Bluetooth pairing cannot be made, try the following steps:
Make sure you have entered the same PIN code to both the unit and the Bluetooth device if prompted.
Delete pairing information from both the unit and the Bluetooth device, then perform pairing again.
Try resetting the unit.
How can I improve poor phone sound quality or echo during a Bluetooth call on my KENWOOD KDC-MP372BT?
To improve phone sound quality, try these troubleshooting steps:
Reduce the distance between the unit and the Bluetooth device.
Move the car to a place where you can get a better signal reception.
Adjust the microphone unit’s position.
Adjust the [ECHO CANCEL] and [NR LEVEL] settings in the Bluetooth function menu.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD KENWOOD KDC-MP372BT (01) PDF DOCUMENT