Free English KENWOOD KDC-D378BT (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD KENWOOD KDC-D378BT (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What are the basic faceplate operations for the KENWOOD KDC-D378BT?
| To | On the faceplate |
|---|---|
| Turn on the power | Press SRC. |
| Turn off the power | Press and hold SRC. The power will automatically turn off after 20 minutes when in standby mode (Auto Power Off). |
| Adjust the volume | Turn the volume knob. |
| Select a source | Press SRC repeatedly. Press SRC, then turn the volume knob within 2 seconds. |
| Change the display information | Press DISP repeatedly. You can also turn off the display information by pressing DISP repeatedly. |
How do I detach the faceplate or reset the KENWOOD KDC-D378BT?
To detach the faceplate:
Press the detach button to release the faceplate.
To attach the faceplate:
Align the faceplate and push it into place until it clicks.
How to reset the unit:
After detaching the faceplate, press the reset button on the main unit. You must reset the unit within 5 seconds of detaching the faceplate.
How do I perform the initial setup on my KENWOOD KDC-D378BT?
When you turn on the power for the first time or after a factory reset, the display shows: “SEL LANGUAGE” → “PRESS” → “VOLUME KNOB”.
Select the display language:
1. Turn the volume knob to select [ENG] (English), [SPA] (Spanish), or [FRE] (French), then press the knob. [ENG] is selected for the initial setup.
Set the clock and date:
1. Press the volume knob to enter [FUNCTION].
2. Turn the volume knob to select [CLOCK], then press the knob.
3. To adjust the clock, turn the volume knob to select [CLOCK ADJUST], then press the knob.
4. Turn the volume knob to make the settings, then press the knob. Set the time in the order of “Hour” → “Minute”.
5. To set the clock format, turn the volume knob to select [CLOCK FORMAT], then press the knob.
6. Turn the volume knob to select [12H] or [24H], then press the knob.
7. To set the date format, turn the volume knob to select [DATE FORMAT], then press the knob.
8. Turn the volume knob to select [DD/MM/YY] or [MM/DD/YY], then press the knob.
9. To set the date, turn the volume knob to select [DATE SET], then press the knob.
10. Turn the volume knob to make the settings, then press the knob. Set the date in the order of “Day” → “Month” → “Year” or “Month” → “Day” → “Year”.
11. Press and hold the back button (curved arrow) to exit.
How do I configure optional settings on the KENWOOD KDC-D378BT?
You can only set the following items while the unit is in STANDBY source.
1. Press SRC repeatedly to enter STANDBY.
2. Press the volume knob to enter [FUNCTION].
3. Turn the volume knob to select an item (see the following table), then press the knob.
4. Repeat step 3 until the desired item is selected or activated.
5. Press and hold the back button (curved arrow) to exit.
| Setting | Options | Description |
|---|---|---|
| [TUNER SETTING] | [PRESET TYPE] | [NORMAL]: Memorizes one station for each preset button in each band (FM1/FM2/FM3/AM). [MIX]: Memorizes one station or SiriusXM channel for each preset button, regardless of the selected band or SiriusXM channel. |
| [SYSTEM] | [KEY BEEP] | [ON]: Activates the keypress tone. [OFF]: Deactivates. |
| [CD READ] | [1]: Automatically distinguishes between audio file disc and music CD. [2]: Forces to play as a music CD. No sound can be heard if an audio file disc is played. |
|
| [FACTORY RESET] | [YES]: Resets the settings to default (except the stored station). [NO]: Cancels. |
|
| Language | [ENGLISH]/[ESPANOL]/[FRANCAIS] | |
| [SOURCE SELECT] | [PANDORA SRC] | [ON]: Enables PANDORA/PANDORA BT in source selection. [OFF]: Disables. |
| [SPOTIFY SRC] | [ON]: Enables SPOTIFY/SPOTIFY BT in source selection. [OFF]: Disables. |
|
| [BT AUDIO SRC] | [ON]: Enables BT AUDIO in source selection. [OFF]: Disables. |
|
| [BUILT-IN AUX] | [ON]: Enables AUX in source selection. [OFF]: Disables. |
How do I register or delete a marine remote ID on the KENWOOD KDC-D378BT?
This function is applicable when you connect a KENWOOD Marine Remote Control unit (KCA-RC55MR, optional accessory).
Preparation:
Press SRC repeatedly to enter STANDBY, then press the volume knob to enter [FUNCTION].
To Register an ID:
1. Turn the volume knob to select [SYSTEM] → [REM SETTING] → [REMOTE ID SET], then press the knob.
2. The remote control ID list is displayed. [YES] indicates a registered ID, and [NO] indicates an available ID.
3. Turn the volume knob to select an available ID ([REM ID1], [REM ID2], or [REM ID3]), then press the knob. “REGISTERING” appears.
4. On the KENWOOD Marine Remote Control unit:
– Press ENTER to register as [REM ID1].
– Press SRC to register as [REM ID2].
– Press DISP to register as [REM ID3].
Once registered, “COMPLETED” appears on the display.
To Delete a Registered ID:
1. Turn the volume knob to select [SYSTEM] → [REM SETTING] → [REMOTE ID DEL], then press the knob.
2. Turn the volume knob to select the ID to delete ([ID1 DELETE], [ID2 DELETE], or [ID3 DELETE]), then press the knob.
3. Turn the volume knob to select [YES] to delete the ID, or [NO] to cancel.
How do I operate the Radio tuner on the KENWOOD KDC-D378BT?
Search for a station:
1. Press SRC repeatedly to select RADIO.
2. Press BAND repeatedly to select FM1/FM2/FM3/AM.
3. Press the left/right arrow buttons to search for a station.
Store and select preset stations:
You can store up to 18 stations for FM and 6 stations for AM.
– To store a station: Press and hold one of the number buttons (1 to 6).
– To select a stored station: Press one of the number buttons (1 to 6).
How can I play music from a CD, USB device, or iPod/iPhone on my KENWOOD KDC-D378BT?
Insert a disc:
Insert a disc with the label side up into the loading slot. The source changes to CD automatically and playback starts.
Connect a USB device:
Connect a USB storage device to the USB input terminal. The source changes to USB automatically and playback starts.
Connect an iPod/iPhone:
Connect your iPod/iPhone to the USB input terminal using a compatible cable. The source changes to iPod USB automatically and playback starts. You can also connect your iPod/iPhone via Bluetooth.
Basic Playback Controls:
| To | On the faceplate |
|---|---|
| Play back/pause | Press button 6 (play/pause icon). |
| Reverse/Fast-forward | Press and hold the left/right arrow buttons. |
| Select a track/file | Press the left/right arrow buttons. |
| Select a folder (CD/USB) | Press buttons 2 (up arrow) / 1 (down arrow). |
| Repeat play | Press button 4 repeatedly to cycle through repeat options. |
| Random play | Press button 3 repeatedly to cycle through random options. |
How do I select a file to play from a CD or USB source on my KENWOOD KDC-D378BT?
From a folder or list:
1. Press the magnifying glass button.
2. Turn the volume knob to select a folder/list, then press the knob.
3. Turn the volume knob to select a file, then press the knob. The selected file starts playing.
Quick search (CD/USB only):
If you have many files, you can search through them quickly.
1. Press the magnifying glass button.
2. Turn the volume knob to select a folder/list, then press the knob.
3. Turn the volume knob quickly to browse through the list quickly.
4. Turn the volume knob to select a file, then press the knob. The selected file starts playing.
How do I listen to and control Pandora® on my KENWOOD KDC-D378BT?
You can listen to Pandora on an iPhone/iPod touch or Android device via Bluetooth.
Preparation:
– Install the latest version of the Pandora application on your device, create an account, and log in.
– In the unit’s settings, select [ON] for [PANDORA SRC] in [SOURCE SELECT].
Start Listening:
1. Start the Pandora application on your device.
2. Connect your device via Bluetooth.
3. Press SRC repeatedly on the unit to select PANDORA BT. Broadcast starts automatically.
Playback Controls:
| Action | On the faceplate |
|---|---|
| Play back/pause | Press button 6. |
| Skip a track | Press the right arrow button. |
| Select thumbs up or thumbs down | Press buttons 2 (up arrow) / 1 (down arrow). |
Create and store a new station:
1. Press the magnifying glass button.
2. Turn the volume knob to select [NEW STATION], then press the knob.
3. Turn the volume knob to select [FROM ARTIST] or [FROM TRACK], then press the knob. A new station is created based on the current artist or song.
4. Press and hold one of the number buttons (3, 4, or 5) to store.
How do I use Spotify® with my KENWOOD KDC-D378BT?
You can listen to Spotify on an iPhone/iPod touch or Android device via Bluetooth.
Preparation:
– Install the latest version of the Spotify application on your device, create an account, and log in.
– In the unit’s settings, select [ON] for [SPOTIFY SRC] in [SOURCE SELECT].
Start Listening:
1. Start up the Spotify application on your device.
2. Connect your device via Bluetooth.
3. Press SRC repeatedly on the unit to select SPOTIFY BT. Broadcast starts automatically.
Playback Controls:
| Action | On the faceplate |
|---|---|
| Play back/pause | Press button 6. |
| Skip a track | Press the left/right arrow buttons. |
| Select thumbs up or thumbs down (Radio only) | Press buttons 2 (up arrow) / 1 (down arrow). |
| Start radio | Press and hold button 5. |
| Repeat play (Playlists only) | Press button 4 repeatedly. |
| Random play (Playlists only) | Press button 3 repeatedly. |
Save favorite song information (while listening to Radio on Spotify):
Press and hold the volume knob. “SAVED” appears, and the information is stored to “Your Music” or “Your Library” on your Spotify account. To unsave, repeat the same procedure.
How do I listen to SiriusXM® Radio on my KENWOOD KDC-D378BT?
A SiriusXM Vehicle Tuner and Subscription are required.
Preparation:
1. Connect the optional SiriusXM Vehicle Tuner to the expansion port on the rear of the unit.
2. Check your Radio ID for activation by tuning to Channel 0.
3. Activate your subscription.
4. Press SRC repeatedly to select SIRIUS XM to start updating.
Start Listening:
1. Press SRC repeatedly to select SIRIUS XM.
2. Press BAND repeatedly to select a band.
3. Press the magnifying glass button. The “Q” indicator lights up.
4. Turn the volume knob to select a category, then press the knob. If “ALL CHANNELS” is selected, all available channels will be shown.
5. Turn the volume knob to select a channel, then press the knob. Alternatively, press the left/right arrow buttons to search for a channel manually.
How do I pair and connect a Bluetooth device to my KENWOOD KDC-D378BT?
Pair for the first time:
1. Press SRC to turn on the unit.
2. On your Bluetooth device, search for and select the name of your receiver (“KMR-D378BT”).
3. The display will show “PAIRING” → “PASS XXXXXX” → “Device name” → “PRESS” → “VOLUME KNOB”. For some devices, you may need to enter the PIN code immediately after searching.
4. Press the volume knob on the unit to start pairing.
5. “PAIRING OK” appears when pairing is completed. Once pairing is done, the Bluetooth connection is established automatically, and the “BT1” and/or “BT2” indicator will light up.
A maximum of two Bluetooth phones and one Bluetooth audio device can be connected at any time. Up to five devices can be registered (paired) in total.
How do I handle phone calls using my KENWOOD KDC-D378BT?
| Situation | Action | On the faceplate |
|---|---|---|
| First incoming call | Answer a call | Press the phone icon button, the volume knob, or one of the number buttons (1 to 6). |
| Reject a call | Press the magnifying glass button. | |
| End a call | Press the magnifying glass button. | |
| While on a call | Answer a second incoming call (holds first call) | Press the phone icon button. |
| Reject a second incoming call | Press the magnifying glass button. | |
| While having two active calls | End current call and activate held call | Press the magnifying glass button. |
| Swap between the current and held call | Press the phone icon button. | |
| Adjust phone volume | Turn the volume knob. ([00] to [35]) | |
| During a call | Switch between hands-free and private talk modes | Press button 6. |
How do I make a call from my KENWOOD KDC-D378BT?
1. Press the phone icon button to enter Bluetooth mode.
2. Turn the volume knob to select a calling method, then press the knob:
– [CALL HISTORY]: (Phone must support PBAP) Press the volume knob to select a name or phone number (“I” for incoming, “O” for outgoing, “M” for missed call), then press the volume knob to call.
– [PHONE BOOK]: (Phone must support PBAP) Turn the volume knob to select a name, press the knob, then turn the volume knob to select a phone number and press the knob to call.
– [NUMBER DIAL]: Turn the volume knob to select a number (0-9) or character (*, #, +). Press the left/right arrow buttons to move the entry position. After entering the number, press the volume knob to call.
– [VOICE]: Press and hold the phone icon button to activate your phone’s voice recognition. Speak the name of the contact you want to call.
How do I listen to Bluetooth audio on my KENWOOD KDC-D378BT?
1. Press SRC repeatedly to select BT AUDIO. Pressing the magnifying glass button also enters BT AUDIO directly.
2. Operate the audio player via Bluetooth to start playback.
While in BT AUDIO source, you can connect to five Bluetooth audio devices and switch between them by pressing button 5.
| Action | On the faceplate |
|---|---|
| Play back/pause | Press button 6. |
| Select group or folder | Press buttons 2 (up arrow) / 1 (down arrow). |
| Reverse skip/Forward skip | Press the left/right arrow buttons. |
| Reverse/Fast-forward | Press and hold the left/right arrow buttons. |
How do I use Amazon Alexa with my KENWOOD KDC-D378BT?
Preparation:
– Create an Amazon account.
– Install the latest version of the Alexa mobile app on your smartphone and log in.
– Enable the internet connection on your smartphone.
First-Time Setup:
1. Pair your smartphone with the unit via Bluetooth.
2. Start the Alexa mobile app on your device.
3. Search for and select your receiver’s name (“KMR-D378BT”) in the SETUP section of the Alexa app to complete the setup process.
Basic Operations:
Once the connection is established:
1. Press the VOICE button on the unit to speak with Alexa. The display shows: “ALEXA” → “LISTENING…”.
2. Communicate with Alexa via the connected microphone. “THINKING…” appears while processing, and “SPEAKING…” appears while responding.
During music playback in ALEXA source, you can press the VOICE button to pause the music and activate Alexa for a new command.
How do I change the display information for different sources on the KENWOOD KDC-D378BT?
Each time you press the DISP button, the display information changes. If information is unavailable, “NO TEXT” or “NO INFO” may appear.
| Source name | Display information cycle |
|---|---|
| STANDBY | Source name/Clock → Clock → Turns off the display → back to the beginning |
| RADIO | Source name/Clock → Frequency → Clock → Turns off the display → back to the beginning (For FM Radio Data System stations: Source name/Clock → Station name/Program type → Radio text → Radio text+ → Radio text+ song title/Radio text+ artist → Frequency → Clock → Turns off the display → back to the beginning) |
| CD or USB | For CD-DA: Source name/Clock → Disc title/Artist → Track title/Artist → Playing time → Clock → Turns off the display → back to the beginning For MP3/WMA/AAC/WAV/FLAC: Source name/Clock → Song title/Artist → Album title/Artist → Folder name → File name → Playing time → Clock → Turns off the display → back to the beginning |
| iPod USB/iPod BT | When [MODE OFF] is selected: Source name/Clock → Song title/Artist → Album title/Artist → Playing time → Clock → Turns off the display → back to the beginning |
| PANDORA/ PANDORA BT | Source name/Clock → Station name → Shared/Radio → Title → Artist → Album title → Playing time → Clock → back to the beginning |
| SPOTIFY/ SPOTIFY BT | Source name/Clock → Context title → Song title → Artist → Album title → Playing time → Clock → Turns off the display → back to the beginning |
| BT AUDIO/ ALEXA | Source name/Clock → Song title/Artist → Album title/Artist → Playing time → Clock → Turns off the display → back to the beginning |
| AUX | Source name/Clock → Clock → Turns off the display → back to the beginning |
What should I do if the KENWOOD KDC-D378BT displays “MISWIRING CHECK WIRING THEN PWR ON”?
This message indicates a wiring issue. Turn the power off, then check to be sure the terminals of the speaker wires are insulated properly. After checking, turn the power on again.
Why doesn’t the KENWOOD KDC-D378BT unit work at all?
If the unit is completely unresponsive, try resetting the unit. Detach the faceplate and press the small reset button located on the main unit body. If this does not solve the problem, consult your nearest service center.
What does “SET ERROR” or “DEL ERROR” mean on the KENWOOD KDC-D378BT display?
This message indicates that setting or deleting the marine remote control ID was unsuccessful. Turn the power off, then turn the power on and perform the operation again.
What should I do if my iPod/iPhone does not turn on or work with the KENWOOD KDC-D378BT?
First, check the connection between the unit and your iPod/iPhone. If the connection is secure, disconnect and reset the iPod/iPhone using a hard reset, then reconnect it to the unit.
What should I do if Bluetooth pairing cannot be made with the KENWOOD KDC-D378BT?
If you are unable to pair your Bluetooth device, try the following steps:
– Make sure you have entered the same PIN code on both the unit and the Bluetooth device, if prompted.
– Delete the pairing information from both the unit and the Bluetooth device, then perform the pairing process again.
– Try resetting the unit.
Why is the phone sound quality poor or why is there echo during a call on my KENWOOD KDC-D378BT?
For poor sound quality:
– Reduce the distance between the unit and your Bluetooth device.
– Move your car to a location with better signal reception.
For echo or noise:
– Adjust the microphone unit’s position. Ensure it is aimed towards you and away from speakers.
– Check the [ECHO CANCEL] setting in the menu and adjust it as needed.
What should I do if the KENWOOD KDC-D378BT displays “DISCONNECTED” when trying to use Amazon Alexa?
This message indicates a loss of connection. Be sure to connect your smartphone to the unit via Bluetooth. Also, ensure the audio device is properly connected via Bluetooth by selecting it from [AUDIO SELECT] in the [BT MODE] menu.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD KENWOOD KDC-D378BT (01) PDF DOCUMENT