KENWOOD KDC-MP378BT (01) PDF Document

Here are the basic operations for your KENWOOD KDC-MP378BT receiver:

Turn on the power: Press the SRC button.

Turn off the power: Press and hold the SRC button.

Adjust the volume: Turn the volume knob.

Select a source: Press the SRC button repeatedly. Alternatively, press the SRC button, then turn the volume knob within 2 seconds to select a source.

Change the display information: Press the DISP button repeatedly. You can also turn off the display information by pressing DISP repeatedly.

Detach the faceplate: Press the detach button to remove the faceplate.

Reset the unit: After detaching the faceplate, press the reset button. The unit must be reset within 5 seconds of detaching the faceplate.

Before first use, pull out the insulation sheet. To operate the receiver, point the remote control towards the remote sensor on the faceplate. Do not expose the sensor to bright sunlight.

Adjust the volume: Press VOL ∧ or VOL ∨. To increase the volume continuously up to 15, press and hold VOL ∧.

Attenuate the sound: Press ATT during playback. Press again to cancel.

Select a source: Press SRC repeatedly.

Turn off the power: Press and hold SRC to turn off the power. Note that pressing SRC does not turn the power on.

How to replace the battery:

1. Slide the back cover off.

2. Insert one CR2025 lithium battery with the “+” side facing up.

3. Replace the back cover.

When you turn on the power for the first time or after a factory reset, you need to set the display language and cancel the demonstration mode.

1. Select the display language:

The display will show: “SEL LANGUAGE” → “PRESS” → “VOLUME KNOB”.

Turn the volume knob to select [ENG] (English), [SPA] (Spanish), or [FRE] (French), then press the knob. [ENG] is the initial setup default.

2. Cancel the demonstration mode:

The display will show: “CANCEL DEMO” → “PRESS” → “VOLUME KNOB”.

Press the volume knob again. [YES] is selected for the initial setup.

Press the volume knob again. “DEMO OFF” appears, and the demonstration mode is canceled.

1. Press the volume knob to enter the [FUNCTION] menu.

2. Turn the volume knob to select [CLOCK], then press the knob.

To adjust the clock:

3. Turn the volume knob to select [CLOCK ADJUST], then press the knob.

4. Turn the volume knob to make the settings, then press the knob. Set the time in the order of “Hour” → “Minute”.

To set the clock format:

5. Turn the volume knob to select [CLOCK FORMAT], then press the knob.

6. Turn the volume knob to select [12H] or [24H], then press the knob.

To set the date:

7. Turn the volume knob to select [DATE FORMAT], then press the knob.

8. Turn the volume knob to select [DD/MM/YY] or [MM/DD/YY], then press the knob.

9. Turn the volume knob to select [DATE SET], then press the knob.

10. Turn the volume knob to make the settings, then press the knob. Set the date in the order of “Day” → “Month” → “Year” or “Month” → “Day” → “Year”.

11. Press and hold the back button (marked with a curved arrow) to exit.

You can set the following items only when the unit is in STANDBY source.

1. Press SRC repeatedly to enter STANDBY.

2. Press the volume knob to enter [FUNCTION].

3. Turn the volume knob to select an item from the table below, then press the knob.

4. Repeat step 3 until the desired item is selected or activated.

5. Press and hold the back button to exit.

Search for a station:

1. Press SRC repeatedly to select RADIO.

2. Press BAND repeatedly (or press #FM+/*AM- on the remote control) to select FM1/FM2/FM3/AM.

3. Press the seek buttons (◄◄/►►I) or use the remote (◄◄/►►I (+)) to search for a station.

Store and select stations:

You can store up to 18 stations for FM and 6 stations for AM.

To store a station: Press and hold one of the number buttons (1 to 6).

To select a stored station: Press one of the number buttons (1 to 6) on the faceplate or the remote control.

Direct Access Tuning (using the remote control):

1. Press DIRECT to enter Direct Access Tuning.

2. Press the number buttons to enter a station frequency.

3. Press ENT ►II to search for a station.

1. While in RADIO source, press the volume knob to enter [FUNCTION].

2. Turn the volume knob to select an item, then press the knob.

3. Repeat step 2 to change the setting.

4. Press and hold the back button to exit.

Insert a disc:

Insert a disc with the label side up into the loading slot. The source changes to CD automatically and playback starts.

Connect a USB device:

Connect a USB storage device to the USB input terminal. The source changes to USB automatically and playback starts.

Connect an iPod/iPhone:

Connect your iPod/iPhone to the USB input terminal using an appropriate cable. The source changes to iPod USB automatically and playback starts. You can also connect your iPod/iPhone via Bluetooth.

This feature allows you to control the unit with your vehicle’s existing steering remote control keys if your vehicle is equipped with one.

Make the connection:

Connect the steering remote cable (supplied) to your vehicle’s steering remote harness. Consult a professional for this connection.

Configure the control keys:

1. Press SRC repeatedly to enter STANDBY.

2. Press the volume knob to enter [FUNCTION].

3. Turn the volume knob to select [SYSTEM], then press the knob.

4. Turn the volume knob to select [USER S.REMO], then press the knob.

5. Turn the volume knob to select [SET KEY], then press the knob. A key list of 16 assignable keys appears.

6. Turn the volume knob to select any key from the list to assign (e.g., K#1), then press the knob. “PRESS KEY TO ASSIGN K##” appears.

7. Press and hold the control key on your steering wheel that you want to assign. A list of functions will appear on the display ([ATT], [SEEK UP], etc.).

8. Turn the volume knob to select a function to assign to that key, then press the knob. The function is now assigned.

9. Repeat steps 6 to 8 to assign other control keys.

10. Press and hold the back button to exit.

Reassign the control keys:

To reset the keys, follow steps 1-4 above, then select [RESET KEY]. Turn the volume knob to select [YES], then press the knob. All control keys will be reset.

Each time you press the DISP button, the display information changes. If information is unavailable, “NO TEXT” or “NO INFO” may appear. You can also press DISP repeatedly to turn the display off.

The available display information varies by the selected source:

STANDBY: Source name/Clock → Clock → Turns off the display → back to the beginning

RADIO: Source name/Clock → Frequency → Clock → Turns off the display → back to the beginning

RADIO (FM Radio Data System): Source name/Clock → Station name/Program type → Radio text → Radio text+ → Radio text+ song title/Radio text+ artist → Frequency → Clock → Turns off the display → back to the beginning

CD-DA: Source name/Clock → Disc title/Artist → Track title/Artist → Playing time → Clock → Turns off the display → back to the beginning

CD/USB (MP3/WMA/etc.): Source name/Clock → Song title/Artist → Album title/Artist → Folder name → File name → Playing time → Clock → Turns off the display → back to the beginning

iPod USB/iPod BT: Source name/Clock → Song title/Artist → Album title/Artist → Playing time → Clock → Turns off the display → back to the beginning

PANDORA/PANDORA BT: Source name/Clock → Station name → Shared/Radio → Title → Artist → Album title → Playing time → Clock → back to the beginning

SPOTIFY/SPOTIFY BT: Source name/Clock → Context title → Song title → Artist → Album title → Playing time → Clock → Turns off the display → back to the beginning

BT AUDIO/ALEXA: Source name/Clock → Song title/Artist → Album title/Artist → Playing time → Clock → Turns off the display → back to the beginning

AUX: Source name/Clock → Clock → Turns off the display → back to the beginning

If you see “ERROR” or “FAILED” on the display of your KENWOOD KDC-MP378BT, it indicates that your steering remote controller is not compatible with the unit, or the learning process may not have been completed successfully. In this case, you should consult your car audio dealer for further assistance and details on compatibility.

If you are experiencing poor radio reception or static noise on your KENWOOD KDC-MP378BT, please ensure that the antenna is connected firmly and securely to the back of the unit.

The playback order for your KENWOOD KDC-MP378BT is determined by the order in which files were recorded onto the disc or by the file name for a USB device. The playback order is based on this information from the recording process, not by any other sorting method.

The display of the elapsed playing time on your KENWOOD KDC-MP378BT depends on the recording process of the disc or USB device. If the information was not recorded correctly, the display may be inaccurate. This is not a malfunction of the unit.

If your iPod/iPhone is not functioning correctly with the KENWOOD KDC-MP378BT, try the following steps:

1. Check the connection between the unit and your iPod/iPhone to ensure it is secure.

2. Disconnect the iPod/iPhone from the unit and perform a hard reset on the device. Then, reconnect it.

The “NO DISC” message on your KENWOOD KDC-MP378BT indicates that there is no disc in the unit or the disc is not readable. Please insert a playable disc into the loading slot.

The “TOC ERROR” message indicates an issue with the Table of Contents on the disc. Please make sure the disc is clean and inserted properly into your KENWOOD KDC-MP378BT. Try cleaning the disc and re-inserting it.

The “NA FILE” message on your KENWOOD KDC-MP378BT means that the file format on the media (disc/USB) is not supported by the unit. Please ensure that the media contains audio files in a supported format.

The “COPY PRO” message indicates that a copy-protected file is being played from a disc or USB device. Your KENWOOD KDC-MP378BT cannot play this type of file.

A “CONNECT ERROR” message while using Pandora on your KENWOOD KDC-MP378BT indicates that the communication is unstable. Check the connection to your smartphone and ensure you have a stable internet connection.

The “RATING ERROR” message on your KENWOOD KDC-MP378BT means that the registration of a thumbs up or thumbs down has failed due to insufficient network connectivity. Please check your smartphone’s internet connection.

The “THUMBS N/A” message indicates that the registration of thumbs up or thumbs down is not allowed for the current track or station on your KENWOOD KDC-MP378BT.

A “LICENSE ERROR” on your KENWOOD KDC-MP378BT indicates that you are trying to access Pandora from a country where the service is not available or deliverable.

If you are experiencing sound interruptions or skipping with a Bluetooth audio player connected to your KENWOOD KDC-MP378BT, please try the following:

• Reduce the distance between the unit and the Bluetooth audio player.

• Turn off, then turn on the unit and try to connect again.

• Other Bluetooth devices might be trying to connect to the unit. Check for and disconnect any other nearby devices.

If you are unable to control your Bluetooth audio player from the KENWOOD KDC-MP378BT, please take these steps:

• Check whether the connected Bluetooth audio player supports Audio/Video Remote Control Profile (AVRCP). Refer to the instructions of your audio player.

• Disconnect and then reconnect the Bluetooth player to the unit.

The messages “NO ENTRY” or “NO PAIR” on your KENWOOD KDC-MP378BT indicate that there is no registered device connected or found via Bluetooth. Please ensure your Bluetooth device is discoverable and try pairing it again.

If “ERROR” appears on the display of your KENWOOD KDC-MP378BT, try the operation again. If the error message appears again, check if the connected device supports the function you have tried to use.

The messages “NO INFO” or “NO DATA” on your KENWOOD KDC-MP378BT indicate that the unit cannot get the contact information from your Bluetooth device. Ensure your phone’s permissions are set to allow contact sharing with the receiver.

If you see “HF ERROR XX” or “BT ERROR” on your KENWOOD KDC-MP378BT, reset the unit and try the operation again. If this does not solve the problem, please consult your nearest service center for assistance.