Free English KENWOOD KDC-X704 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD KENWOOD KDC-X704 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How do I perform basic operations on the KENWOOD KDC-X704 faceplate?
| To | On the faceplate |
|---|---|
| Turn on the power | Press SRC. |
| Turn off the power | Press and hold SRC. |
| Adjust the volume | Turn the volume knob. |
| Select a source |
• Press SRC repeatedly. • Press SRC, then turn the volume knob within 2 seconds. |
| Change the display information | Press DISP repeatedly. |
How do I detach, attach, or reset the faceplate on my KENWOOD KDC-X704?
To detach the faceplate:
1. Press the detach button.
2. Remove the faceplate.
To attach the faceplate:
Align the faceplate and push it into place until it clicks.
How to reset the unit:
Press the reset button on the main unit within 5 seconds after detaching the faceplate.
How do I perform the initial setup on my KENWOOD KDC-X704?
When you turn on the power for the first time, you need to set the display language, cancel the demonstration mode, and set the clock.
1. Select the display language and cancel the demonstration:
1. The display shows: “SEL LANGUAGE” → “PRESS” → “VOLUME KNOB”.
2. Turn the volume knob to select [ENG] (English) / [SPA] (Spanish) / [FRE] (French), then press the knob. [ENG] is the initial setup.
3. The display shows: “CANCEL DEMO” → “PRESS” → “VOLUME KNOB”.
4. Press the volume knob again. [YES] is selected for the initial setup.
5. Press the volume knob again. “DEMO OFF” appears.
2. Set the clock and date:
1. Press the volume knob to enter [FUNCTION].
2. Turn the volume knob to select [CLOCK], then press the knob.
3. To adjust the clock, turn the volume knob to select [CLOCK ADJUST], then press the knob.
4. Turn the volume knob to make the settings for “Hour” → “Minute”, pressing the knob to confirm each.
5. To set the clock format, turn the volume knob to select [CLOCK FORMAT], then press the knob.
6. Turn the volume knob to select [12H] or [24H], then press the knob.
7. To set the date format, turn the volume knob to select [DATE FORMAT], then press the knob.
8. Turn the volume knob to select [DD/MM/YY] or [MM/DD/YY], then press the knob.
9. To set the date, turn the volume knob to select [DATE SET], then press the knob.
10. Turn the volume knob to set the “Day” → “Month” → “Year” (or “Month” → “Day” → “Year”), pressing the knob to confirm each.
11. Press and hold the back button to exit.
How do I set the optional settings in STANDBY mode on the KENWOOD KDC-X704?
You can only set the following items while the unit is in STANDBY source.
1. Press SRC repeatedly to enter STANDBY.
2. Press the volume knob to enter [FUNCTION].
3. Turn the volume knob to select an item from the table below, then press the knob.
4. Repeat step 3 until the desired item is selected or activated.
5. Press and hold the back button to exit.
| Setting | Options and Description |
|---|---|
| [DISPLAY] – [EASY MENU] | [ON]: [ZONE 1] illumination changes to white color when entering [FUNCTION]. [OFF]: [ZONE 1] illumination remains as [COLOR SELECT] color. |
| [TUNER SETTING] – [PRESET TYPE] | [NORMAL]: Memorizes one station for each preset button in each band (FM1/FM2/FM3/AM). [MIX]: Memorizes one station or SiriusXM channel for each preset button, regardless of the selected band or SiriusXM channel. |
| [SYSTEM] – [KEY BEEP] | [ON]: Activates the keypress tone. [OFF]: Deactivates. |
| [SOURCE SELECT] – [PANDORA SRC] | [ON]: Enables PANDORA/PANDORA BT in source selection. [OFF]: Disables. |
| [SOURCE SELECT] – [SPOTIFY SRC] | [ON]: Enables SPOTIFY/SPOTIFY BT in source selection. [OFF]: Disables. |
| [SOURCE SELECT] – [BT AUDIO SRC] | [ON]: Enables BT AUDIO in source selection. [OFF]: Disables. |
| [SOURCE SELECT] – [BUILT-IN AUX] | [ON]: Enables AUX in source selection. [OFF]: Disables. |
| [CD READ] | [1]: Automatically distinguishes between audio file disc and music CD. [2]: Forces to play as a music CD. No sound can be heard if an audio file disc is played. |
| [F/W UPDATE] – [F/W UP xxxx] | [YES]: Starts upgrading the firmware. [NO]: Cancels. |
| [FACTORY RESET] | [YES]: Resets the settings to default (except the stored station). [NO]: Cancels. |
| [ENGLISH]/[ESPANOL]/[FRANCAIS] | Select the display language for [FUNCTION] menu and music information if applicable. By default, [ENGLISH] is selected. |
How do I operate the HD Radio™ Tuner on the KENWOOD KDC-X704?
Search for a station:
1. Press SRC repeatedly to select HD RADIO.
2. Press BAND repeatedly to select FM1/FM2/FM3/AM.
3. Press the seek buttons to search for a station or channel.
To store a station/channel, press and hold one of the number buttons (1 to 6).
To select a stored station/channel, press one of the number buttons (1 to 6).
Select an HD Radio multicast channel:
While receiving HD Radio multicast channels, press the seek buttons to select your desired channel (HD1 to HD8).
Receive an Emergency Alert message:
To activate reception:
1. Press the volume knob to enter [FUNCTION].
2. Turn the volume knob to select [TUNER SETTING], then press the knob.
3. Turn the volume knob to select [EA], then press the knob.
4. Turn the volume knob to select [ON], then press the knob.
5. Press and hold the back button to exit.
When an emergency alert message is received, press SRC to ignore the alert message.
Display received emergency alert messages:
1. While listening to the HD RADIO source, press the search button to display the Alert Message List.
2. Turn the volume knob to select a message.
3. Press the volume knob to display the information related to the message.
4. Press the search button again to exit.
What are the HD Radio Tuner settings on the KENWOOD KDC-X704?
| Setting | Options and Description |
|---|---|
| [SEEK MODE] | [AUTO1]: Automatically search for a station or channel. [AUTO2]: Search for a preset station or channel. [MANUAL]: Manually search for a station or channel. |
| [IF BAND] | [AUTO]: Increases tuner selectivity to reduce interference from adjacent stations. [WIDE]: Sound quality is not degraded but may be subject to interference. |
| [AUTO MEMORY] | [YES]: Automatically memorizes 6 stations with good reception. [NO]: Cancels. |
| [RECEIVE MODE] | [AUTO]: Automatically tunes to analog broadcast when digital is unavailable. [DIGITAL]: Tunes to digital broadcast only. [ANALOG]: Tunes to analog broadcast only. |
| [TIME SYNC] | [ON]: Synchronizes the unit’s time to the Radio Broadcast Data System station time. [OFF]: Cancels. |
How do I operate the standard Radio tuner on the KENWOOD KDC-X704?
Search for a station:
1. Press SRC repeatedly to select RADIO.
2. Press BAND repeatedly to select FM1/FM2/FM3/AM.
3. Press the seek buttons to search for a station.
To store a station, press and hold one of the number buttons (1 to 6).
To select a stored station, press one of the number buttons (1 to 6).
How do I play media from a CD, USB, or iPod on the KENWOOD KDC-X704?
Insert a disc:
Insert a disc with the label side up into the loading slot. The source changes to CD automatically and playback starts.
Connect a USB device:
Connect a USB storage device to the USB input terminal. The source changes to USB automatically and playback starts.
Connect an iPod/iPhone:
Connect your iPod/iPhone to the USB input terminal using a compatible cable. The source changes to iPod USB automatically and playback starts. You can also connect via Bluetooth.
Playback Controls:
| To | On the faceplate |
|---|---|
| Play back/pause | Press 6. |
| Reverse/Fast-forward | Press and hold the seek buttons. |
| Select a track/file | Press the seek buttons. |
| Select a folder | Press 2 / 1. |
| Repeat play | Press 4 repeatedly. Options vary by source. |
| Random play | Press 3 repeatedly. Options vary by source. |
How do I search for music on a CD, USB, or iPod with the KENWOOD KDC-X704?
From a folder or list:
1. Press the search button.
2. Turn the volume knob to select a folder/list, then press the knob.
3. Turn the volume knob to select a file, then press the knob.
Quick search (CD/USB only):
1. Press the search button.
2. Turn the volume knob to select a folder/list, then press the knob.
3. Turn the volume knob quickly to browse through the list quickly.
4. Turn the volume knob to select a file, then press the knob.
Alphabet search (iPod USB/BT source only):
1. Press the search button.
2. Turn the volume knob to select a list, then press the knob.
3. Turn the volume knob quickly to enter character search.
4. Turn the volume knob to select a character.
5. Press the seek buttons to move the entry position (up to 3 characters).
6. Press the volume knob to start searching.
7. Turn the volume knob to select a file, then press the knob.
How do I listen to Pandora® on my KENWOOD KDC-X704?
Preparation:
• Install the latest version of the Pandora application on your device.
• Select [ON] for [PANDORA SRC] in [SOURCE SELECT].
Start listening:
1. Start up the Pandora application on your device.
2. Connect your device to the unit via USB or Bluetooth.
3. Press SRC repeatedly to select PANDORA or PANDORA BT.
Create and store a new station:
1. Press the search button.
2. Turn the volume knob to select [NEW STATION], then press the knob.
3. Turn the volume knob to select [FROM ARTIST] or [FROM TRACK], then press the knob.
4. A new station is created. Press and hold one of the number buttons (3, 4, or 5) to store.
Bookmark current song information:
Press and hold the volume knob. “BOOKMARKED” appears.
How do I listen to Spotify on my KENWOOD KDC-X704?
Preparation:
• Install the latest version of the Spotify application on your device.
• Select [ON] for [SPOTIFY SRC] in [SOURCE SELECT].
Start listening:
1. Start up the Spotify application on your device.
2. Connect your device to the unit via USB or Bluetooth.
3. Press SRC repeatedly to select SPOTIFY or SPOTIFY BT.
Search for a song or station:
1. Press the search button.
2. Turn the volume knob to select a list type, then press the knob.
3. Turn the volume knob to select the desired song or station.
4. Press the volume knob to confirm.
Save favorite song information:
While listening to the Radio on Spotify, press and hold the volume knob. “SAVED” appears and the information is stored to “Your Music” or “Your Library” on your Spotify account.
How do I listen to SiriusXM® Radio on my KENWOOD KDC-X704?
A SiriusXM Vehicle Tuner and Subscription are required.
Preparation:
1. Connect the optional SiriusXM Vehicle Tuner.
2. Check your Radio ID for activation (tune to Channel 0).
3. Activate the subscription.
Start listening:
1. Press SRC repeatedly to select SIRIUS XM.
2. Press BAND repeatedly to select a band.
3. Press the search button.
4. Turn the volume knob to select a category, then press the knob.
5. Turn the volume knob to select a channel, then press the knob.
TuneScan™:
Press and hold BAND to start scanning the first 6 seconds of the recorded music contents on your SmartFavorites channels.
How do I set up and use Bluetooth on the KENWOOD KDC-X704?
Pair and connect a Bluetooth device for the first time:
1. Press SRC to turn on the unit.
2. On your Bluetooth device, search for and select the name of your receiver (e.g., “KDC-X704”).
3. “PAIRING” → “PASS XXXXXX” → “Device name” → “PRESS” → “VOLUME KNOB” appears on the display. For some devices, you may need to enter a PIN code.
4. Press the volume knob to start pairing. “PAIRING OK” appears when pairing is completed.
Make a call:
1. Press the phone button to enter Bluetooth mode.
2. Turn the volume knob to select from [CALL HISTORY], [PHONE BOOK], [NUMBER DIAL], or [VOICE], then press the knob.
3. Follow the on-screen prompts to select a contact or dial a number.
Answer a call:
When there is an incoming call, press the phone button or the volume knob.
Listen to Bluetooth Audio:
1. Press SRC repeatedly to select BT AUDIO.
2. Operate the audio player via Bluetooth to start playback. You can use the unit’s playback controls (play/pause, skip).
What are the Bluetooth settings available on my KENWOOD KDC-X704?
| Setting | Description |
|---|---|
| [PHONE SELECT] | Selects the phone to connect or disconnect. |
| [AUDIO SELECT] | Selects the audio device to connect or disconnect. |
| [DEVICE DELETE] | Deletes a paired device from the list. |
| [PIN CODE EDIT] | Changes the PIN code. |
| [RECONNECT] | [ON]: Automatically reconnects the last connected device. [OFF]: Cancels. |
| [AUTO PAIRING] | [ON]: Automatically pairs with a supported iPhone/iPod touch when connected via USB. [OFF]: Cancels. |
| [INITIALIZE] | [YES]: Initializes all Bluetooth settings. [NO]: Cancels. |
How do I set up and use Amazon Alexa on the KENWOOD KDC-X704?
Preparation:
• Create an account at amazon.com, or use the Alexa mobile application.
• Install the latest version of the Alexa mobile application on your device and log in.
• Be sure to enable the internet connection on your smartphone.
Setup for the first time:
1. Pair your device with this unit via Bluetooth.
2. Start up the Alexa mobile application on your device.
3. Search and select the name of your receiver (e.g., “KDC-X704”) on the SETUP section of the Alexa mobile application to complete the one-time setup process.
Basic operations:
1. Once Alexa connection is established, press the Alexa button on the unit to speak with Alexa.
2. The display shows: “ALEXA” → “LISTENING…”.
3. Communicate with Alexa via the connected microphone.
How do I adjust the Audio Settings on my KENWOOD KDC-X704?
1. Press the volume knob to enter [FUNCTION].
2. Turn the volume knob to select an item, then press the knob.
3. Repeat step 2 until the desired item is selected or activated.
4. Press and hold the back button to exit.
Common settings include:
• [MANUAL EQ]/[EASY EQ]: Adjust your own sound settings or select a preset equalizer.
• [SOUND EFFECT]: Access settings like [SOUND RECNSTR], [SPACE ENHANCE], [SND REALIZER], [STAGE EQ], and [DRIVE EQ] to enhance the audio experience.
• [SPEAKER SIZE]: Set the size of your front, rear, and tweeter speakers for optimum performance.
• [X’ OVER]: Adjust crossover frequencies, slopes, and gains for your speakers and subwoofer.
• [DTA SETTINGS]: Configure Digital Time Alignment by setting your listening position, speaker distances, and gain levels to create a more suitable sound environment.
• [SUBWOOFER SET]: Turn the subwoofer output on or off.
• [BASS BOOST]: Select your preferred bass boost level.
• [LOUDNESS]: Boost low or high frequencies to produce a well-balanced sound at low volume.
How do I change the Display Settings on my KENWOOD KDC-X704?
1. Press the volume knob to enter [FUNCTION].
2. Turn the volume knob to select [DISPLAY], then press the knob.
3. Turn the volume knob to select an item, then press the knob to adjust.
| Setting | Description |
|---|---|
| [COLOR SELECT] | Selects illumination colors for [ALL ZONE], [ZONE 1], and [ZONE 2] separately. You can select a preset color or create a custom R/G/B color. |
| [DIMMER] | Dims the illumination. Can be set to turn on and off at specific times. |
| [BRIGHTNESS] | Sets the brightness for day and night separately for different zones. |
| [TEXT SCROLL] | [ONCE]: Scrolls the display information once. [AUTO]: Repeats scrolling at 5-second intervals. [OFF]: Cancels scrolling. |
| [LEVEL METER] | [ON]: Shows the level meter on the display window. [OFF]: Cancels. |
| [CLOCK DISPLAY] | [ON]: The clock time is shown on the display even when the unit is turned off. [OFF]: Cancels. |
| [DEMO MODE] | [ON]: Activates the display demonstration automatically if no operation is done for about 15 seconds. [OFF]: Deactivates. |
How do I clean my KENWOOD KDC-X704?
Cleaning the unit:
Wipe off dirt on the faceplate with a dry silicone or soft cloth.
Cleaning the connector:
Detach the faceplate and clean the connector gently with a cotton swab. Be careful not to damage the connector.
What should I do if the KENWOOD KDC-X704 displays “MISWIRING CHECK WIRING THEN PWR ON”?
Turn the power off, then check to be sure the terminals of the speaker wires are insulated properly. Turn the power on again.
Why can’t I select a source on my KENWOOD KDC-X704?
Check the [SOURCE SELECT] setting. Some sources can be disabled in the menu, preventing them from being selected.
Why doesn’t the KENWOOD KDC-X704 unit work at all?
Try resetting the unit. Detach the faceplate and press the reset button located on the main unit.
What should I do if the disc cannot be ejected from the KENWOOD KDC-X704?
Press and hold the eject button to forcibly eject the disc. Be careful not to drop the disc when it is ejected. If this does not solve the problem, reset the unit.
Why does “READING” keep flashing when using a USB device with my KENWOOD KDC-X704?
This may happen if you are using too many hierarchical levels and folders on the USB device. Try simplifying the folder structure. You can also try reloading the disc or reattaching the USB/iPod/iPhone device.
What does “CONNECT ERROR” mean when using Pandora on the KENWOOD KDC-X704?
This message indicates that the communication is unstable. Check your phone’s network connection.
Why does my KENWOOD KDC-X704 show “CHECK APP” when I try to use Spotify?
This indicates the Spotify application is not connected properly or the user is not logged in. End the Spotify application on your phone and restart it. Then, log in to your Spotify account.
What does the SiriusXM® Radio error “CHECK TUNER” mean on my KENWOOD KDC-X704?
This error message means you should check that the SiriusXM Vehicle Tuner is connected correctly to the unit.
Why can’t my Bluetooth device pair with the KENWOOD KDC-X704?
If pairing fails, try the following steps:
• Make sure you have entered the same PIN code to both the unit and the Bluetooth device, if required.
• Delete pairing information from both the unit and the Bluetooth device, then perform pairing again.
• Try resetting the unit.
Why is the phone sound quality poor during a Bluetooth call on my KENWOOD KDC-X704?
• Reduce the distance between the unit and the Bluetooth device.
• Move the car to a place where you can get a better signal reception.
• Adjust the microphone unit’s position.
• Check the [ECHO CANCEL] and [MIC GAIN] settings in the audio menu during a call.
What should I do if I get a wrong response or no response from Alexa on my KENWOOD KDC-X704?
If there is no response, it may be because the Amazon cloud was unable to analyze the voice input. Check your phone’s internet connection.
If you receive a wrong response, Alexa may have misunderstood what was said or did not catch the entire request. Please try speaking again, clearly.
Why does “DISCONNECTED” appear when I try to use Alexa on my KENWOOD KDC-X704?
This message indicates you need to connect your smartphone to the unit via Bluetooth. Ensure the audio device is connected via Bluetooth by selecting it from [AUDIO SELECT] in [BT MODE]. If the problem persists, perform the one-time setup process for Alexa again.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD KENWOOD KDC-X704 (01) PDF DOCUMENT