Free English IPEGA PG-SW2210 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD IPEGA PG-SW2210 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What are the technical specifications for the IPEGA PG-SW2210 charging station?
Input Voltage: DC 5V
Charging Current (per controller): 200mA
Charging Time: Approximately 2.5-3.5 hours
How do I use the IPEGA PG-SW2210 charging station?
1. Place the original NS 2 Dock into the groove of the charging base. Connect one end of the included charging cable to the power input port of the charging base, and the other end to the USB port of the NS 2 Dock to provide power.
2. After powering on, the indicator lights for the four charging slots will turn solid blue.
3. Insert NS 2 Joypad controllers into any of the charging slots. While charging, the corresponding indicator will stay steady orange. When fully charged, the indicator will turn steady blue.
4. The product includes a lighting effect touch switch with 9 adjustable lighting modes. Press the switch to cycle through the 9 effects; Press and hold for 3 seconds to save the current effect and turn off the lights. Press briefly again to restore the saved lighting effect.
What are the main features of the IPEGA PG-SW2210?
1. A multifunctional stand designed for use with the original NS 2 Dock.
2. Supports simultaneous charging of up to four NS 2 Joypads with individual charging indicators.
3. Equipped with a Type-C port to receive power from the NS 2 Dock.
4. Includes a touch lighting switch with 9 adjustable light effects.
5. Comes with 12 game card slots for convenient storage and use.
What precautions should be taken when using the IPEGA PG-SW2210?
1. Do not store the product in humid or high-temperature environments.
2. Avoid hitting, dropping, puncturing, or disassembling the product to prevent damage.
3. Dispose of the product properly through qualified recycling organizations.
4. Do not use the product for charging controllers other than original NS 2 Joypads.
What is included in the package for the IPEGA PG-SW2210?
Charging Station ×1
USB Cable x1
User Manual ×1
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD IPEGA PG-SW2210 (01) PDF DOCUMENT