Free English HYGGER HG182 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD HYGGER HG182 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the product features of the HYGGER HG182?
The HYGGER HG182 offers the following features:
1. The air is evenly distributed, creating bubbles like mist.
2. The thicker and heavier strip do not float and sink to the bottom.
3. The vertical blow nozzle ensures a bubble-free operation.
4. Made of PVC and ABS materials, it is suitable for use in both fresh and seawater.
What are the technical specifications for the HYGGER HG182 models?
The specifications for the HYGGER HG182 are as follows:
| Model | Size(length) | Applicable aquarium | The required air pump output | Air tube caliber |
|---|---|---|---|---|
| HG182-15CM | 15*2.5*1.7cm / 5.9*1*0.67inches | ≥20cm | ≥3W | 4mm |
| HG182-25CM | 25*2.5*1.7cm / 9.8*1*0.67inches | ≥30cm | ≥3W | 4mm |
| HG182-35CM | 35*2.5*1.7cm / 13.8*1*0.67inches | ≥40cm | ≥5W | 4mm |
How should I prepare and set up the HYGGER HG182 for use?
Follow these instructions for the HYGGER HG182:
1. Soak the bubble strip in water for at least 30 minutes before use to ensure the bubbles are more uniform and delicate.
2. Select an air pump compatible with the bubble strip’s air volume and power requirements. (Note: Air pump is not included).
3. After connecting the bubble strip, place it into the water and repeatedly remove and insert the air tube to quickly achieve the atomization effect by forcing water back through the tube.
4. The unit is easy to clean and suitable for both freshwater and saltwater environments.
How is the HYGGER HG182 installed?
The installation diagram for the HYGGER HG182 indicates the following sequence: Connect the air pump to the check valve, then to the air volume control valve, and finally to the bubble strip located at the bottom of the aquarium.
What should I do if there is no airflow output from my HYGGER HG182?
If there is no airflow output from the HYGGER HG182, check if the check valve is installed backward or if the air pump power is too low.
How can I fix uneven airflow output on the HYGGER HG182?
To fix uneven airflow, set the air pump to the highest setting and reinstall the air tubing for a more defined refinement effect.
What is included in the HYGGER HG182 packing list?
The HYGGER HG182 package contains:
1 x Air bubble strip
1 x 2m Air tube
1 x Transparent suction cup
1 x Air volume control valve
1 x T-shaped shunt tube
1 x User manual
CLICK HERE TO DOWNLOAD HYGGER HG182 (01) PDF DOCUMENT