HONDA CIVIC HYBRID 2010 (01) PDF MANUAL

FREE ENGLISH HONDA CIVIC HYBRID 2010 (01) PDF USER GUIDE

FREE ENGLISH HONDA CIVIC HYBRID 2010 (01) PDF USER MANUAL

FREE ENGLISH HONDA CIVIC HYBRID 2010 (01) PDF OWNER GUIDE

FREE ENGLISH HONDA CIVIC HYBRID 2010 (01) PDF OWNER MANUAL

FREE ENGLISH HONDA CIVIC HYBRID 2010 (01) PDF REFERENCE GUIDE

FREE ENGLISH HONDA CIVIC HYBRID 2010 (01) PDF INSTRUCTION GUIDE

FREE ENGLISH HONDA CIVIC HYBRID 2010 (01) PDF REFERENCE MANUAL

FREE ENGLISH HONDA CIVIC HYBRID 2010 (01) PDF INSTRUCTION MANUAL

FREE ENGLISH HONDA CIVIC HYBRID 2010 (01) PDF OPERATING INSTRUCTIONS

CLICK HERE TO DOWNLOAD HONDA CIVIC HYBRID 2010 (01) PDF MANUAL

If this is not the document you want for this product, click here to see if we have any other documents for this product.

HONDA CIVIC HYBRID 2010 (01) PDF SUMMARY:

How do I enhance the enjoyment of my new vehicle?

One of the best ways to enhance the enjoyment of the new vehicle is to read the owner’s manual to learn how to operate its driving controls and convenience items. Keep the owner’s manual in the vehicle for reference.

What protects my new vehicle?

Several warranties protect the new vehicle. Read the warranty booklet thoroughly to understand the coverages and be aware of the rights and responsibilities.

What does the safety alert symbol and signal words mean?

The safety information is preceded by a safety alert symbol and one of three signal words: DANGER, WARNING, or CAUTION. These signal words mean:

DANGER: You WILL be KILLED or SERIOUSLY HURT if you don’t follow instructions.
WARNING: You CAN be KILLED or SERIOUSLY HURT if you don’t follow instructions.
CAUTION: You CAN be HURT if you don’t follow instructions.

Where can I find important safety information in the vehicle?

Important safety information can be found:

On the vehicle.
Safety messages.
Safety headings.
Safety section.
Safety labels.

What should I do if a seat belt does not seem to work properly?

If a seat belt does not seem to work properly, it may not protect the occupant in a crash. Using a seat belt that is not working properly can result in serious injury or death. Have the dealer check the belt as soon as possible.

How do I adjust the height of the front seat belt anchors?

The front seats have adjustable seat belt anchors. To adjust the height of an anchor, press and hold the release button and slide the anchor up or down as needed (it has four positions).

What should I do after occupants have adjusted their seats and head restraints, and put on their seat belts?

After all occupants have adjusted their seats and head restraints, and put on their seat belts, it is very important that they continue to sit upright, well back in their seats, with their feet on the floor, until the vehicle is safely parked and the engine is off.

What should I do if the seat belt indicator comes on or the beeper sounds when the driver’s seat belt is latched and there is no front seat passenger and no items on the front seat?

If the indicator comes on or the beeper sounds when the driver’s seat belt is latched and there is no front seat passenger and no items on the front seat, something may be interfering with the monitoring system. Look for and remove:

Any items under the front passenger’s seat.
Any object(s) hanging on the seat or in the seat-back pocket.
Any object on the floor that is touching the rear of the seat-back. If no obstructions are found, have the vehicle checked by a dealer.

What should I do to fasten the lap/shoulder belt?

To fasten the belt, insert the latch plate into the buckle, then tug on the belt to make sure the buckle is latched.

How do I unlock the lap/shoulder belt?

To unlock the belt, press the red PRESS button on the buckle. Guide the belt across your body so that it retracts completely. After exiting the vehicle, be sure the belt is out of the way and will not get closed in the door.

How do I deactivate the lockable retractor?

To deactivate the lockable retractor, unlatch the buckle and let the seat belt fully retract. To refasten the seat belt, pull it out only as far as needed.

How often should I check the condition of the seat belts?

For safety, you should check the condition of your seat belts regularly. Pull each belt out fully, and look for frays, cuts, burns, and wear. Check that the latches work smoothly and the belts retract easily. If a belt does not retract easily, cleaning the belt may correct the problem. Any belt that is not in good condition or working properly will not provide good protection and should be replaced as soon as possible.

What should I do if a seat belt is worn during a crash?

If a seat belt is worn during a crash, it must be replaced by the dealer. A belt that has been worn during a crash may not provide the same level of protection in a subsequent crash.

What should I do to ensure that the passenger’s advanced front airbag system will work properly?

To ensure that the passenger’s advanced front airbag system will work properly, do not do anything that would increase or decrease the weight on the front passenger’s seat. This includes:

A rear passenger pushing or pulling on the back of the front passenger’s seat.
Moving the front seat forcibly back against cargo on the seat or floor behind it.
Hanging heavy items on the front passenger seat, or placing heavy items in the seat-back pocket. Back seat passengers should not wedge objects or intentionally force their feet under the front passenger seat. Also, make sure the floor mat behind the front passenger’s seat is properly positioned on the floor.

What should a front seat passenger do if the side airbag off indicator comes on?

If the side airbag off indicator comes on, have the passenger sit upright. Once the passenger is out of the airbag’s deployment path, the system will turn the airbag back on, and the indicator will go out.

What should I do if the SRS indicator does not come on after turning the ignition switch to the ON (II) position?

If the SRS indicator does not come on after you turn the ignition switch to the ON (II) position, you should have the system checked by your dealer.

When should I have my vehicle serviced regarding the airbags?

You must have your vehicle serviced if:

An airbag ever inflates.
The SRS indicator alerts you to a problem.
If your vehicle has a moderate to severe impact.

What should I do if the passenger airbag off indicator comes on with no front seat passenger and no objects on the seat, or with an adult riding there?

If the indicator comes on with no front seat passenger and no objects on the seat, or with an adult riding there, something may be interfering with the weight sensors. Look for and remove:

Any items under the front passenger’s seat.
Any object(s) hanging on the seat or in the seat-back pocket.
Any object on the floor that is touching the rear of the seat-back. If no obstructions are found, have the vehicle checked by a dealer as soon as possible.

What should I do to install a LATCH-compatible child seat?

To install a LATCH-compatible child seat:

Place the child seat on the vehicle seat, then attach the seat to the lower anchors according to the child seat maker’s instructions.
Make sure there are no objects near the anchors that could prevent a secure connection between the child seat and the anchors.
Move the seat belt buckle or tongue away from the lower anchors.
Lift the head restraint, then route the tether strap through the legs of the head restraint and over the seat-back, making sure the strap is not twisted.
Attach the tether strap hook to the tether anchor, then tighten the strap as instructed by the child seat maker.
If the tether strap is too long and cannot be tightened firmly, find a route where the strap can be tightened securely.
Push and pull the child seat forward and from side-to-side to verify that it is secure.

When not using the LATCH system, how should all child seats be secured to the vehicle?

All child seats must be secured to the vehicle with the lap part of a lap/shoulder belt.

How to install a child seat with a lap/shoulder belt?

With the child seat in the desired seating position, route the belt through the child seat according to the seat maker’s instructions, then insert the latch plate into the buckle and remove any slack from the lap portion of the belt.
To activate the lockable retractor, slowly pull the shoulder part of the belt all the way out until it stops, then let the belt feed back into the retractor.
After the belt has retracted, tug on it. If the belt is locked, you will not be able to pull it out. If you can pull the belt out, it is not locked, and you will need to repeat these steps.
After confirming that the belt is locked, grab the shoulder part of the belt near the buckle, and pull up to remove any slack from the lap part of the belt. If the lap part of the belt is not tight, the child seat will not be secure.
Push and pull the child seat forward and from side-to-side to verify that it is secure enough to stay upright during normal driving maneuvers. If the child seat is not secure, unlatch the belt, allow it to retract fully, then repeat these steps.

How to remove slack from the belt when installing a child seat with a lap/shoulder belt?

To remove slack, it may help to put weight on the child seat, or push on the back of the seat while pulling up on the belt.

How to deactivate the lockable retractor and remove a child seat?

Unlatch the buckle, unroute the seat belt, and let the belt fully retract.

Where can a child seat with a tether be installed?

A child seat with a tether can be installed in any seating position in the back seat, using one of the anchorage points.

How to install a child seat with a tether?

After properly securing the child seat, lift the head restraint, then route the tether strap over the seat-back and through the head restraint legs.
Lift the anchor cover, then attach the tether strap hook to the anchor, making sure the strap is not twisted.
Tighten the strap according to the seat maker’s instructions.
If the tether strap is too long and cannot be tightened firmly, find a route where the strap can be tightened securely.

How to determine if a lap/shoulder belt properly fits a child?

Have the child put on the seat belt, then ask yourself:

Does the child sit all the way back against the seat?
Do the child’s knees bend comfortably over the edge of the seat?
Does the shoulder belt cross between the child’s neck and arm?
Is the lap part of the belt as low as possible, touching the child’s thighs?
Will the child be able to stay seated like this for the whole trip?

If you answer yes to all these questions, the child is ready to wear the lap/shoulder belt correctly. If you answer no to any question, the child needs to ride on a booster seat.

When should a child use a booster seat?

A child who has outgrown a forward-facing child seat should ride in a back seat and use a booster seat until the lap/shoulder belt fits them properly without the booster.

If a child must ride in front, what precautions should be taken?

Move the vehicle seat as far back as possible, use a booster seat if needed, have the child sit up properly, and wear the seat belt properly.

What should you do if you decide that a child can safely ride up front?

Carefully read the owner’s manual, and make sure you understand all seat belt instructions and all safety information.
Move the vehicle seat to the rear-most position.
Have the child sit up straight, back against the seat, and feet on or near the floor.
Check that the child’s seat belt is properly and securely positioned.
Supervise the child. Even mature children sometimes need to be reminded to fasten the seat belts or sit properly.

What additional safety precautions should be taken regarding seat belts and children?

Do not put any accessories on a seat belt.
Do not let a child wear a seat belt across the neck.
Do not let a child put the shoulder part of a seat belt behind the back or under the arm.
Two children should never use the same seat belt.

If you must sit in your parked vehicle with the engine running, how should you adjust the heating and cooling system?

Select the fresh air mode.
Select the mode.
Set the fan speed to high.
Set the temperature control to a comfortable setting.

What should you do if you must drive with the trunk open?

Open all the windows and set the climate control system.

What should you do if a safety label comes off or becomes hard to read?

Contact your dealer for a replacement (except for the U.S. dashboard label which may be removed by the owner).

How to turn off the Auto Door Lock modes?

Make sure the shift lever is in the Park (P) position.
Turn the ignition switch to the ON (II) position, and open the driver’s door.
Push and hold the front of the master door lock switch on the driver’s door until you hear a click (after about 5 seconds).
Release the switch, and within 5 seconds, turn the ignition switch to the LOCK (0) position.

How to program the Park Lock mode?

Locks all doors when the shift lever is moved out of the Park (P) position.

Make sure the shift lever is in the Park (P) position.
Turn the ignition switch to the ON (II) position, and make sure to close the driver’s door.
Push and hold the front of the master door lock switch on the driver’s door. You will hear a click. Keep holding the switch until you hear another click (after about 5 seconds).
Release the switch and, within 5 seconds, turn the ignition switch to the ACCESSORY (I) position. Move the shift lever to the Park (P) position.
Turn the ignition switch to the LOCK (0) position.

How to program the Drive Lock mode?

Locks all doors when the vehicle’s speed reaches about 9 mph (15 km/h).

Make sure the shift lever is in the Park (P) position.
Turn the ignition switch to the ON (II) position, and make sure to close the driver’s door.
Push and hold the front of the master door lock switch on the driver’s door. You will hear a click. Keep holding the switch until you hear another click (after about 5 seconds).
Release the switch, and within 5 seconds, turn the ignition switch to the LOCK (0) position.

How to turn off the Auto Door Unlock modes?

Make sure the shift lever is in the Park (P) position.
Turn the ignition switch to the ON (II) position, and open the driver’s door.
Push and hold the rear of the master door lock switch on the driver’s door. You will hear a click, and after about 5 seconds, you will hear another click.
Release the switch, and within 5 seconds, turn the ignition switch to the LOCK (0) position.

How to program the Park Unlock mode?

Unlocks the driver’s door or all doors when the shift lever is moved into the Park (P) position with the brake pedal depressed.

Make sure the shift lever is in the Park (P) position.
Turn the ignition switch to the ON (II) position, and make sure to close the driver’s door.
Push and hold the rear of the master door lock switch on the driver’s door. You will hear a click. Continue to hold down the switch:
- Until you hear another click (after about 5 seconds) to activate driver’s door unlock feature.
- Or, until you hear two more clicks (after about 10 seconds) to activate all doors unlock feature.
Release the switch, and within 5 seconds, turn the ignition switch to the LOCK (0) position.

How to program the Ignition Switch Unlock mode?

Unlocks the driver’s door or all doors when the ignition switch is moved out of the ON (II) position.

Make sure the shift lever is in the Park (P) position.
Push and hold the rear of the master door lock switch on the driver’s door. You will hear a click. Continue to hold the switch:
- Until you hear another click (after about 5 seconds) to activate driver’s door unlock feature.
- Or, until you hear two more clicks (after about 10 seconds) to activate all doors unlock feature.
Release the switch and, within 5 seconds, turn the ignition switch to the ACCESSORY (I) position. Move the shift lever to the Park (P) position.
Turn the ignition switch to the LOCK (0) position.
Push and hold the brake pedal, then move the shift lever out of the Park (P) position.

How to open the trunk?

Pull the trunk release handle on the left side of the driver’s seat.

How to open the trunk from the inside in an emergency?

Push the release lever to the left.

How do you use the remote transmitter to lock all doors?

Press the lock button once. Some exterior lights will flash once. When you push the lock button twice within 5 seconds, you will hear a horn to verify that the doors are locked. You cannot lock the doors if any door is not fully closed or the key is in the ignition switch.

How do you use the remote transmitter to unlock the doors?

Press the unlock button once to unlock the driver’s door. Push it twice to unlock the other doors. Some exterior lights will flash twice each time you press the button. This button does not work when the key is in the ignition switch.

What happens when you unlock the doors using the remote transmitter?

The ceiling light (if the ceiling light switch is in the door activated position) will come on when you press the unlock button. If you do not open any door, the light stays on for about 30 seconds, then fades out. If you relock the doors with the remote transmitter before 30 seconds have elapsed, the light goes off immediately.

What happens if you unlock the doors with the remote transmitter, but do not open any of the doors within 30 seconds?

The doors automatically relock and the security system will also set.

How do you activate the panic mode on the remote transmitter?

Press the panic button for about 1 second to attract attention; the horn will sound and the exterior lights will flash for about 30 seconds. To cancel panic mode, press any other button on the remote transmitter, or turn the ignition switch to the ON (II) position.

How do you open the trunk using the remote transmitter?

Press the trunk release button for about 1 second to open the trunk. You cannot open the trunk if the key is in the ignition switch.

How to replace the remote transmitter battery?

Remove the screw at the base of the transmitter with a small Phillips-head screwdriver.
Separate the transmitter by prying its middle seam with your fingernail.
Inside the transmitter, separate the inner cover from the keypad by releasing the two tabs on the cover.
Remove the old battery from the back of the inner cover, and note the polarity. Make sure the polarity of the new battery is the same (+ side facing down), then insert it into the back of the cover.
Install the parts in reverse order.

How to adjust the seat forward or backward?

To adjust the seat forward or backward, pull up on the bar under the seat cushion’s front edge. Move the seat to the desired position, and release the bar. Try to move the seat to make sure it is locked in position.

How to change the seat-back angle of the front seat?

Pull up the lever on the outside of the seat bottom.

How to adjust the height of the driver’s seat?

To raise the seat, repeatedly pull up the lever on the outside of the seat cushion. To lower the seat, push the lever down repeatedly.

How to adjust the head restraint?

The head restraints adjust for height. You need both hands to adjust a restraint. Do not attempt to adjust it while driving. To raise it, pull upward. To lower the restraint, push the release button sideways, and push the restraint down.

How to remove a head restraint for cleaning or repair?

Pull it up as far as it will go. Push the release button, then pull the restraint out of the seat-back.

How to reinstall a head restraint?

When reinstalling a head restraint, put the legs back in place. Then adjust it to the appropriate height while pressing the release button. Make sure the head restraint locks in position when you reinstall it.

How can the lid of the console compartment be used?

The lid of the console compartment can be moved forward and backward to be used as an armrest. Make sure the armrest is securely latched, and hands and fingers are away from the armrest before moving it.

What should I not do to ensure the head restraint system works properly?

Do not hang any items on the head restraints or from the restraint legs.
Do not place any object between an occupant and the seat-back.
Install each restraint in its proper location.
Only use genuine Honda replacement head restraints.

What precautions should I take when using the seat heaters?

If the engine is left idling for an extended period, do not use the seat heaters, even on the LO setting, as it can weaken the battery, causing hard starting.
Use the HI setting only to heat the seats quickly because it draws large amounts of current from the battery.

How do I use the seat heaters?

Push the front of the switch, HI, to rapidly heat up the seat. After the seat reaches a comfortable temperature, select LO by pushing the back of the switch to keep the seat warm. The ignition switch must be in the ON (II) position to use the heaters.

How does the HI setting work on the seat heaters?

In the HI setting, the heater turns off when the seat gets warm and turns back on after the seat’s temperature drops.

How does the LO setting work on the seat heaters?

In the LO setting, the heater runs continuously and does not cycle with temperature changes.

How do I use the power windows?

Turn the ignition switch to the ON (II) position to raise or lower any window. To open the window, push the switch down and hold it; release the switch when you want to stop the window. To close the window, pull back on the switch and hold it. The windows operate for up to 10 minutes after you turn off the ignition switch. Opening either front door cancels this function.

How do I use the auto function on the driver’s window?

To open or close the driver’s window automatically, push or pull the window switch firmly down or up to the second detent, and release it. The window will automatically go down or up all the way. To stop the window, pull or push the window switch briefly.

What is the auto-reverse function?

If the driver’s window senses any obstacle while it is closing automatically, it will reverse direction and then stop. To close the window, remove the obstacle, then use the window switch again. Auto-reverse stops sensing when the window is almost closed.

What is the MAIN switch for, and when should it be off?

If the MAIN switch is OFF, the passenger windows cannot be raised or lowered. Keep the MAIN switch off when you have children in the vehicle so they do not injure themselves by operating the windows unintentionally.

How do I adjust the power mirrors?

Turn the ignition switch to the ON (II) position.
Move the selector switch to L (driver’s side) or R (passenger’s side).
Push the appropriate edge of the adjustment switch to move the mirror right, left, up, or down.
When finished, move the selector switch to the center (off) position. This turns the adjustment switch off to keep the settings.

What are the day and night positions for on the inside mirror used for?

The inside mirror has day and night positions. The night position reduces glare from headlights behind you. Flip the tab on the bottom edge of the mirror to select the day or night position.

How do I operate the heated mirrors (Canadian models)?

With the ignition switch in the ON (II) position, turn on the heaters by pressing the button. The indicator in the button comes on as a reminder. Press the button again to turn the heaters off. Pressing this button also turns the rear window defogger on and off.

How do I use the parking brake?

To apply the parking brake, pull the lever up fully. To release it, pull up slightly, push the button, and lower the lever. The parking brake indicator on the instrument panel should go out when the parking brake is fully released.

How do I open the console compartment?

To open the console compartment, pull up on the lever and lift the lid. To close, lower the lid and push it down until it latches.

How do I open the front beverage holder?

Open the front beverage holder by sliding its cover backward.

How do I use the accessory power socket?

To use an accessory power socket, the ignition switch must be in the ACCESSORY (I) or ON (II) position. This socket is intended to supply power for 12 volt DC accessories that are rated 120 watts or less (10 amps). It will not power an automotive-type cigarette lighter element.

How do I open the glove box?

Open the glove box by pulling the handle to the left. Close it with a firm push.

How do I operate the front ceiling light spotlights?

Push the spotlight lenses to turn them on and off.

How does the Door Activated function on the ceiling light work?

In the Door Activated (center) position, the light comes on when you:

Open any door.
Unlock the doors with the key or remote transmitter.
Remove the key from the ignition.

If either door is left open without the key in the ignition switch, the ceiling light will go off after 3 minutes. After all doors are closed tightly, the light dims slightly, then fades out in about 30 seconds. If no door is opened after unlocking the driver’s door or removing the key from the ignition switch, the light(s) fades out in about 30 seconds.

How do I use the automatic climate control?

Press the AUTO button.
Set the desired temperature by turning the temperature control dial. You will see AUTO in the system’s display.

How does semi-automatic operation work?

Manual climate control system functions can be selected when in full automatic mode, while all other features remain automatically controlled. Making any manual selection causes the word AUTO in the display to go out.

How do I adjust the fan speed and airflow?

Turn the fan control dial to increase or decrease the fan speed and airflow.

How do I adjust the temperature?

Turning the temperature control dial clockwise increases the temperature of the airflow.

How does the system regulate temperature when set to the lower or upper limit?

When the temperature is set to its lower or upper limit, the system runs at full cooling or heating only and does not regulate the interior temperature.

What does the AUTO mode do in cold weather?

In cold weather, the fan will not come on automatically until the heater starts to develop warm air.

How do I activate the air conditioner in AUTO mode if it is not working?

In ‘‘AUTO’’ mode, the air conditioner may not work if the humidity inside the vehicle is low. To activate the air conditioner, press the A/C button.

How do I manually control airflow direction?

Use the mode control buttons to select the vents air flows from. Some air will flow from the dashboard corner vents in all modes.

What happens when I select the windshield defrost button?

When you select the windshield defrost button, the system automatically switches to fresh air mode and turns on the A/C.

What does the recirculation button do?

When the recirculation indicator is on, air from the vehicle’s interior is sent throughout the system again. Select recirculation mode when driving through dusty or smoky conditions, then return to fresh air mode.

What does the fresh air button do?

When the fresh air indicator is on, air is brought in from the outside of the vehicle. The system should be left in fresh air mode under almost all conditions. Keeping the system in recirculation mode, particularly with the A/C off, can cause the windows to fog up.

How do I use the heater?

Set the temperature to the lower limit.
Make sure the A/C is off.
Select the floor vents and fresh air mode.
Set the fan to the desired speed.

What should I do if the engine coolant temperature gauge moves near the red zone while using the A/C?

If the engine coolant temperature gauge moves near the red zone, turn off the A/C until the gauge reading returns to normal.

How do I use the A/C to dehumidify the interior?

Turn on the A/C by pressing the button. The indicator in the button comes on when a fan speed is selected.
Make sure the temperature is set to maximum cool.
Select the dashboard vents.
If the outside air is humid, select recirculation mode. If the outside air is dry, select fresh air mode.
Set the fan to the desired speed.

How can I cool down the interior more rapidly?

If the interior is very warm, you can cool it down more rapidly by partially opening the windows, turning on the A/C, and setting the fan to maximum speed in fresh air mode.

How do I use the A/C in combination with the heater to prevent window fogging?

Select the floor vents.
The system automatically switches to the fresh air mode.
Set the fan to the desired speed.
Adjust the warmth of the air with the temperature control dial.

How do I use the ventilation system?

Turn the fan on.
Turn on the air conditioning.
Select the dashboard vents and fresh air mode.
Adjust the temperature to your preference.

How do I defog and defrost the windows?

Select the windshield defrost button. When you select the windshield defrost button, the system automatically switches to fresh air mode and turns on the A/C. The A/C indicator will not come on if it was previously off.
Select the floor vents.
Set the fan and temperature controls to maximum level.

How do I remove exterior frost or ice from the windows?

Set the fan to the desired speed, or high for faster defrosting.
Select the windshield defrost button. When you select the windshield defrost button, the system automatically switches to fresh air mode and turns on the A/C. The A/C indicator will not come on if it was previously off.
Adjust the temperature so the airflow feels warm.
Select the rear window defogger to help clear the rear window.
To increase airflow to the windshield, close the corner vents.

How can I clear the windows faster?

To clear the windows faster, you can close the dashboard corner vents by rotating the wheel below each vent. This sends more warm air to the windshield defroster vents. Once the windshield is clear, select fresh air mode to avoid fogging the windows.

How do I turn the climate control system off?

Press the OFF button. However, a lack of airflow can cause the windows to fog up. You should keep the fan on at all times so stale air and moisture do not build up in the interior and cause fogging.

How do I select a station on the radio?

You can use any of five methods to find radio stations on the selected band: the preset buttons, and the tune, seek, and scan functions.

How do I turn on the radio and adjust the volume?

The ignition switch must be in the ACCESSORY (I) or the ON (II) position. Turn the system on by pushing the PWR/VOL knob or the AM/FM button. Adjust the volume by turning the same knob.

How do I change bands on the radio?

To change bands, press the AM/FM button.

How do I use the TUNE knob?

Use the TUNE knob to tune the radio to a desired frequency. Turn the knob right to tune to a higher frequency, or left to tune to a lower frequency.

How do I use the seek function?

The seek function searches up and down from the current frequency to find a station with a strong signal. To activate it, press the or side of the SEEK bar, then release it.

How do I use the scan function?

To activate it, press the SCAN button, then release it. You will see SCAN in the display. When it finds a strong signal, it will stop and play that station for about 10 seconds. If you do nothing, the system will then scan for the next strong station and play it for 10 seconds. When it plays a station you want to listen to, press the SCAN button again.

How do I store a station using the preset function?

Select the desired band, AM or FM. FM1 and FM2 let you store six stations each.
Use the tune, seek, or scan function to tune the radio to a desired station.
Pick a preset number (1 6), and hold it until you hear a beep.
Repeat steps 1 through 3 to store a total of six stations on AM and twelve stations on FM.

How do I use the auto select feature?

Press the A. SEL button. ‘‘A.SEL’’ flashes in the display, and the system goes into scan mode for several seconds. It stores the frequencies of six AM and twelve FM stations in the preset buttons.

How do I turn off auto select?

To turn off auto select, press the A. SEL (auto select) button. This restores the presets you originally set.

What does it mean if I see a ‘‘0’’ displayed after pressing a preset button?

You will see a ‘‘0’’ displayed after pressing a preset button if auto select cannot find a strong station for that preset button.

How do I adjust the illumination of the audio system?

You can use the instrument panel brightness control buttons to adjust the illumination of the audio system. The audio system illuminates when the parking lights are on, even if the radio is off.

How do I adjust the sound?

Press the SOUND (TUNE) knob repeatedly to display the BASS, TREBLE, FADER, BALANCE, and SVC (speed-sensitive volume compensation) settings. Each mode is shown in the display as it changes. Turn the SOUND (TUNE) knob to adjust the setting to your liking. When the level reaches the center, you will see ‘‘ ’’ in the display. The system will automatically return the display to the selected audio mode about 5 seconds after you stop adjusting a mode. Use the TREBLE/ BASS modes to adjust the tone to your liking.

How do the BALANCE and FADER modes adjust the sound?

BALANCE adjusts the side-to-side strength, while FADER adjusts the front-to-back strength.

How do I use the speed-sensitive volume compensation (SVC) mode?

Turn the SOUND (TUNE) knob to adjust the setting to your liking. If you feel the sound is too loud, choose low. If you feel the sound is too quiet, choose high.

How does the SVC mode work?

The SVC mode controls the volume based on vehicle speed. The faster you go, the louder the audio volume becomes. As you slow down, the audio volume decreases.

What are the four modes of SVC?

SVC OFF, SVC LOW, SVC MID, and SVC HIGH. The default setting is MID.

How do I operate XM Radio?

To listen to XM Radio, turn the ignition switch to the ACCESSORY (I) or the ON (II) position. Push the power/volume knob to turn on the audio system, and press the ‘‘AUX’’ button. Adjust the volume by turning the knob. The last channel you listened to will show in the display.

How do I change channel selections?

Turn the TUNE knob to change channel selections. Turn the knob right for higher-numbered channels and left for lower-numbered channels. In the category mode, you can only select channels within that category.

How do I switch between channel mode and category mode?

Press and hold the DISP button until the mode changes.

How do I change the display while listening to XM Radio?

Each time you press and release the DISP button, the display changes in the following sequence: Channel name, channel number, category, artist name, and music title.

How does the scan function work with XM Radio?

To activate scan, press the SCAN button. The system plays each channel in numerical order for a few seconds, then selects the next channel. When you hear a channel you want to continue listening to, press the button again.

How do I store a channel as a preset?

Use the tune, seek, or scan function to tune to a desired channel.
Pick a preset number you want for that channel.
Press and hold the button until you hear a beep.
Repeat steps 2 and 3 to store the first six channels.
Press the AUX button again. Store the next six channels using steps 2 and 3.

How do I tune to a preset channel?

Once a channel is stored, press and release the proper side of the preset button to tune to it. Press the AUX button. Either XM1 or XM2 will show in the display.

What should I do if my XM Radio service has expired or I purchased the vehicle from a previous owner?

With the ignition switch in the ACCESSORY (I) or ON (II) position, push the power/volume knob to turn on the audio system and press the AUX button. A variety of music types and styles will play.

How do I receive XM Radio service?

Contact XM Radio at http://www.xmradio.com, or at 1-800-852-9696.
Give them your radio I.D. number and your credit card number.
To get your radio I.D. number, turn the TUNE knob until ‘‘0’’ appears in the display. Your I.D. will appear in the display.
Make sure your vehicle remains in an open area with good reception.
Keep your audio system in the XM radio mode while you wait for activation. This should take about 30 minutes.

How do I operate the CD player?

To load or play discs, the ignition switch must be in the ACCESSORY (I) or ON (II) position.
To select the CD player, press the CD button. You will see ‘‘CD’’ in the display. The number of the track playing is shown in the display. The system will continuously play a disc until you change modes.

How do I load a disc?

Insert the disc about halfway into the disc slot. The drive will pull the disc in the rest of the way and begin to play it. When the system reaches the end of the disc, it will return to the beginning and play the disc again.

How do I play the radio when a disc is playing?

To play the radio when a disc is playing, press the AM/FM button. Press the CD button again to switch back to the disc player.

How can I see text data on a disc?

Each time you press the DISP button, the display shows you the text data on a disc if the disc was recorded with text data. You can see the album, artist, and track name in the display. If a disc is recorded in MP3 or WMA, you can see the folder and file name, and the artist, album, and track tag.

How do I change tracks or files?

Use the SEEK/SKIP button while a disc is playing to select passages and change tracks (files in MP3/WMA mode).

How do I skip to the next or previous track?

Each time you press and release the side of the SEEK/SKIP button, the player skips forward to the beginning of the next track (file in MP3 or WMA mode). Press and release the side to skip backward to the beginning of the current track. Press it again to skip to the beginning of the previous track.

How do I move rapidly within a track?

To move rapidly within a track, press and hold the or side of the SEEK/SKIP button.

How do I select a different folder?

To select a different folder, turn the TUNE knob to move to the beginning of the next folder. Turn the knob to the right to skip to the next folder, and to the left to move to the beginning of the current folder. Turn it again to skip to the beginning of the previous folder. Turning the TUNE knob more than one click skips several folders at a time.

How do I continuously replay a track (files in MP3 or WMA mode)?

To continuously replay a track (files in MP3 or WMA mode), press and release the RPT button. You will see ‘‘RPT’’ in the display. Press and hold the RPT button for 2 seconds to turn it off.

How do I continuously replay a folder?

To activate folder repeat, press the RPT button twice. You will hear a beep and see F-RPT in the display. The system continuously replays the current folder. Press the RPT button again to turn it off. Pressing the RDM button, or selecting a different folder with the TUNE knob also turns off the repeat feature.

How do I play tracks in random order?

To activate random play, press and release the RDM button. In MP3 or WMA mode, press the RDM button repeatedly to select RDM (within a folder random play). You will see RDM in the display. Press the RDM button for 2 seconds to return to normal play.

How do I play all files in each folder in random order?

To activate folder random, press the RDM button twice. You will hear a beep and see F-RDM in the display. The system will then select and play files randomly. This continues until you deactivate folder random by pressing the RDM button again, or by selecting a different folder with the TUNE knob.

How do I use the scan function to sample tracks?

To activate scan, press the SCAN button. In MP3 or WMA mode, press the SCAN button repeatedly to select SCAN. You will see SCAN in the display. You will get a 10-second sampling of each track/file on the disc. Press the SCAN button again to get out of scan mode and play the last track/file sampled.

How do I use the scan function to sample the first file in each folder?

To activate folder scan, press the SCAN button twice. You will see F-SCAN in the display. The system plays the first file in the first folder for about 10 seconds. If you do nothing, the system will then play the first files in the next folders for 10 seconds. After playing the first file in the last folder, the system plays normally.

How do I eject a disc?

Press the eject button ( ) to remove the disc. If you eject the disc but do not remove it from the slot, the system will automatically reload it after 10 seconds and put it in pause mode. To begin playing, press the CD button.

How do I stop playing a disc?

To play the radio when a disc is playing, press the AM/FM button. Press the AUX button to switch to an appropriate audio unit (if it is connected to the auxiliary input jack or the USB adapter cable). Press the CD button again to switch back to the disc player.

How does the system behave if I turn it off while a disc is playing?

If you turn the system off while a disc is playing, either with the power/volume knob or by turning off the ignition switch, the disc will stay in the drive. When you turn the system back on, the disc will begin playing where it left off.

How do I select a different disc in the optional disc changer?

To select the disc changer, press the CD button. The disc and track numbers will be displayed. To select a different disc, use the preset 4 (DISC ) or the preset 1 (DISC ) on the preset button. To select the previous disc, press the preset 4 (DISC ), or the preset 1 (DISC ) to select the next disc in sequence.

What happens if I select an empty slot in the disc changer?

If you select an empty slot in the magazine, the changer will search for the next available disc to load and play.

What should I do if I see an error message in the display while playing a disc?

Press the eject button. After ejecting the disc, check it for damage or deformation. If there is no damage, insert the disc again. The audio system will try to play the disc. If there is still a problem, the error message will reappear. Press the eject button, and pull out the disc. Insert a different disc. If the new disc plays, there is a problem with the first disc. If the error message cycle repeats and you cannot clear it, take your vehicle to a dealer.

How do I play an iPod?

To play an iPod, connect it to the USB adapter cable in the console compartment by using your dock connector, then press the AUX button. The ignition switch must be in the ACCESSORY (I) or ON (II) position. The iPod will also be charged with the ignition switch in these positions.

What do I do if the iPod indicator does not appear in the audio display?

If the iPod indicator does not appear in the audio display, check the connections, and try to reconnect the iPod a few times. If the audio system still does not recognize the iPod, the iPod may need to be reset. Follow the instructions that came with your iPod, or you can find reset instructions online.

How do I change the display while playing an iPod?

Each time you press the DISP button, the display mode switches between the album name, the song/track name, the artist name, or name off (which turns off the text display).

How do I change or select files on an iPod?

Use the SEEK/SKIP button while an iPod is playing to select passages and change files.

How do I skip to the next or previous file on an iPod?

Each time you press and release the side of the SEEK/ SKIP button, the system skips forward to the beginning of the next file. Press and release the side of the button to skip backward to the beginning of the current file. Press it again to skip to the beginning of the previous file.

How do I move rapidly within a file on an iPod?

To move rapidly within a file, press and hold either side ( or ) of the SEEK/SKIP button.

How do I select a file from the iPod menu?

Push the TUNE (SOUND) knob to switch the display to an iPod menu, then turn the TUNE knob to select a desired mode. If you stop adjusting, the displayed mode is selected after about five seconds. The system begins to play the first file stored in the selected mode. Turn the TUNE knob to select a different item in the selected mode. The selected item will be shown on the display for a few seconds. When you stop turning, the system begins to play the first file from the selected item.

How do I select repeat or random mode?

You can select any type of repeat and shuffle modes by using the RPT and RDM buttons.

How do I repeat one track?

To activate repeat, press and release the RPT button. You will see RPT in the display. Press the button again to turn it off. Pressing either side of the SEEK/ SKIP button or turning the TUNE knob changes the file while keeping the repeat feature.

How do I play all files in random order?

To activate this, press and release the RDM button. You will see RDM in the display.

How do I play all available albums in random order?

To activate this, press and release the RDM button repeatedly until you see F-RDM in the display. The files in each album are played in the recorded order. Each time you press and release the RDM button, the mode changes from all random, to album random, then to normal play.

How do I stop playing my iPod?

To play the radio, press the AM/FM button. Press the CD button to switch to the disc mode (if a disc is loaded).

How do I disconnect an iPod?

You can disconnect the iPod at any time when you see the ‘‘OK to disconnect’’ message in the iPod display. With the AUX mode, you will see a ‘‘USB NO DATA’’ message in the display. Always make sure you see ‘‘OK to disconnect’’ in the iPod display before you disconnect it. Make sure to follow the iPod’s instructions on how to disconnect the dock connector from the USB adapter cable.

What should I do if I see an error message while playing an iPod?

If you see an error message on the audio display while playing an iPod, find the solution in the chart to the right. If you cannot clear the error message, take your vehicle to your dealer.

How do I play a USB flash memory device?

To play a USB flash memory device, connect it to the USB adapter cable in the console compartment, then press the AUX button. The ignition switch must be in the ACCESSORY (I) or ON (II) position.

How do I connect a USB flash memory device?

Connect the USB flash memory device to the USB adapter cable correctly and securely.
Pull out the USB connector from the holder and remove the cable from the clip in the console compartment.

How do I change the display while playing a USB flash drive?

Each time you press the DISP button, the display mode shows you in sequence, the folder name, the file name, the artist tag, the album tag, the track tag, and name off (which turns off the text display).

How do I change or select files on a USB flash drive?

Use the SEEK/SKIP button while a USB flash memory device is playing to select passages and change files.

How do I skip to the next or previous file on a USB flash drive?

How do I select a different folder on a USB flash drive?

To select a different folder, turn the TUNE knob right or left. Turn to the right to skip to the next folder, and turn to the left to skip to the previous folder. Turning the TUNE knob more than two clicks skips several folders.

How do I move rapidly within a file on a USB flash drive?

To move rapidly within a file, press and hold either side ( or ) of the SEEK/SKIP button.

How do I continuously replay a file on a USB flash drive?

To activate file repeat, press and release the RPT button (preset 2). You will see RPT in the display.

How do I continuously replay a folder on a USB flash drive?

To activate folder repeat, press and release the RPT button (preset 2) repeatedly until you see F-RPT in the display.

How do I play files in random order on a USB flash drive?

To activate all random, press and release the RDM button (preset 3) repeatedly until you see RDM in the display.

How do I play files in a selected folder in random order on a USB flash drive?

To activate folder random, press and release the RDM button (preset 3). You will see F-RDM in the display.

How do I sample all files on a USB flash drive?

To activate the scan, press and release the SCAN button. You will see SCAN in the display. You will get a 10-second sampling of the file in each folder.

How do I stop playing a USB Flash Memory Device?

To stop playing a USB flash memory device, simply disconnect it.

What do I do if I see an error message on the audio display while playing a USB flash memory device?

Consult the error message chart. If the error message persists, it is recommended to take the vehicle to a dealer for assistance.

What does the error message “UNPLAYABLE FILE” mean?

The system cannot read the file(s). Check the files in the USB flash memory device. There is a possibility that the files have been damaged.

What does the error message “UNSUPPORTED” mean?

Appears when the unsupported USB flash memory device is connected.

How do I turn the audio system on?

Push the power/volume knob or the AM/FM button. Pushing the AUDIO button will also turn on the system.

How do I adjust the volume?

Adjust the volume by turning the power/volume knob.

How do I change bands?

To change bands, press the AM/FM button, or touch the desired band icon (FM1, FM2, AM, XM1, or XM2).

How do I tune the radio to a desired frequency?

Use the TUNE bar to tune the radio to a desired frequency. Press the side of the bar to tune to a higher frequency, and press the side to tune to a lower frequency.

How do I rapidly change the frequency?

Press and hold the or side of the TUNE bar until you hear two beeps to change the frequency rapidly. Release the bar when the display reaches the desired frequency.

How do I activate the seek function?

To activate it, press and hold the or side of the TUNE bar until you hear a beep, then release it.

How do I activate the scan function?

To activate it, press the SCAN button, then release it. You will see SCAN in the display. When it finds a strong signal, it will stop and play that station for about 10 seconds.

How do I store a radio station as a preset?

Select the desired band, AM or FM. FM1 and FM2 let you store six stations each. Use the tune, seek, or scan function to tune the radio to a desired station. Pick a preset button, and hold it until you hear a beep. Repeat steps 1 through 3 to store a total of six stations on AM and twelve stations on FM.

How do I use the auto select feature to find stations in the local area?

Press the AUDIO button to view the audio control icons, then touch the AUTO SEL icon. You will see AUTO SEL flashing in the display, and the system goes into scan mode for several seconds. It stores the frequencies of six AM, and twelve FM stations in the preset buttons.

How do I turn off auto select?

Press the AUTO SEL icon. This restores the presets you originally set.

How do I listen to XM Radio?

Turn the ignition switch to the ACCESSORY (I) or the ON (II) position. Push the power/volume knob to turn on the audio system, and press the CD/XM button. Adjust the volume by turning the knob. The last channel you listened to will show in the display.

How do I switch between channel mode and category mode in XM Radio?

Touch the MODE icon. In channel mode, you can select all of the available channels. In category mode, such as Jazz, Rock, Classical, etc., you can select all of the channels within that category. Each time you touch and release the MODE icon, the display changes between the channel mode and the category mode.

How do I change XM Radio channel selections?

Press the TUNE bar to change channel selections. Press for higher numbered channels and for lower numbered channels. In the category mode, you can only select channels within that category. Press and hold either side of the TUNE bar ( or ) until you hear a beep to select another category.

How do I activate the scan function in XM Radio?

To activate scan, press the SCAN button or touch the SCAN icon on the screen. The system plays each channel in numerical order for a few seconds, then selects the next channel. When you hear a channel you want to listen to, press the button or touch the icon again.

How do I store an XM Radio channel?

Press the XM RADIO button. Either XM1 or XM2 will show in the display. Use the tune, seek, or scan function to tune to a desired channel. In category mode, only channels within that category can be selected. In channel mode, all channels can be selected. Pick the preset button (icon) you want for that channel. Press and hold the button (icon) until you hear a beep.

How do I select a channel from the XM Radio channel list?

Touch the CHANNEL LIST icon to switch the display to the channel list which shows all channels in all categories. Select and touch a desired channel.

What does the XM Radio display message “NO SIGNAL” mean?

The signal is currently too weak. Move the vehicle to an area away from tall buildings, and with an unobstructed view of the southern horizon.

What does the XM Radio display message “LOADING” mean?

XM is loading the audio or program information.

What does the XM Radio display message “OFF AIR” mean?

The channel currently selected is no longer broadcasting.

What does the XM Radio display message “UPDATING” mean?

The encryption code is being updated. Wait until the encryption code is fully updated. Channels 0 and 1 should still work normally.

What does the XM Radio display message “- – – -” mean?

The selected channel number does not exist or is not part of your subscription.

What does the XM Radio display message “ANTENNA” mean?

There is a problem with the XM antenna. Please consult your dealer.

What does the XM Radio display message “NO INFO” mean?

This channel has no artist or title information at this time.

How do I get my radio I.D. number for XM Radio?

Press the TUNE bar until ‘‘0’’ appears in the display. Your I.D. will appear in the display.

How do I adjust the sound?

Push the AUDIO button, then enter the sound grid by touching the SOUND icon on the display.

What adjustments can I make to the sound?

You can adjust the following:

Bass
Treble
Fader (front/rear)
Balance (left/right)
Subwoofer

How do I adjust the treble and bass?

Touch either or on the treble or bass adjustment bar. The adjustment bar on the lower right display shows you the current setting.

How do I adjust the front/rear fader?

Touch the FR or RR icon.

How do I adjust the left/right balance?

To adjust the left/right balance, touch the L or R icon.

How do I adjust the subwoofer?

To adjust the sound strength, touch or on each side of the adjustment bar.

How do I select the SVC (speed-sensitive volume compensation) mode?

Touch the appropriate icon (Low, Mid, Hi, Off) to select the mode.

How do I adjust the illumination of the audio system?

You can use the instrument panel brightness control buttons to adjust the illumination of the audio system.

How do I select the background screen mode?

Each time you touch the background icon, the display changes.

How do I load a disc?

Press the OPEN button beside the screen. The screen folds back, and the disc player appears. Insert a disc about halfway into the disc slot. The drive will pull the disc in the rest of the way and begin to play it.

How do I return the screen to the upright position?

Press the CLOSE button on the edge of the screen panel.

How do I operate the disc player?

Push the AUDIO button beside the screen to show the audio display and operate the disc player.

How do I change or select tracks/files?

Each preset button’s function is shown on the bottom of the screen. Each time you press and release (preset 6), the player skips forward to the beginning of the next track (file in MP3 or WMA mode). Press and release (preset 5), to skip backward to the beginning of the current track. Press it again to skip to the beginning of the previous track. To move rapidly within a track/file, press and hold (preset 4) or (preset 3).

How do I select a different folder?

Press either side of the TUNE bar to move to the beginning of the next folder. Press the side of the TUNE bar to skip to the next folder, and the side to move to the beginning of the current folder. Press it again to skip to the beginning of the previous folder.

How do I continuously replay a track (file in MP3 or WMA mode)?

Press and release the RPT button (preset 1). You will see TRACK REPEAT in the display. Press and hold the RPT button for 2 seconds to turn it off.

How do I activate folder repeat?

Press and hold the RPT button (preset 1). You will see FOLDER REPEAT in the display. The system continuously replays the current folder. Press the RPT button again to turn it off. Pressing the RDM button or selecting a different folder with the TUNE bar also turns off folder repeat.

How do I activate track random?

Press and release the RDM button (preset 2). You will see TRACK RANDOM in the display. Press and hold the RDM button for 2 seconds to return to normal play.

How do I activate folder random?

Press the RDM button (preset 2) twice. You will see FOLDER RANDOM in the display. The system then selects and plays files randomly. This continues until you deactivate folder random by pressing the RDM button again, or if you select a different folder with the TUNE bar.

How do I activate the scan function?

Press and release the SCAN button. You will see TRACK SCAN in the display. You will get a 10 second sampling of each track/file on the disc. Press and hold the SCAN button for 2 seconds to get out of scan mode and play the last track/ file sampled.

How do I activate folder scan?

Press and hold the SCAN button. You will see FOLDER SCAN in the display. The system plays the first file in each folder for about 10 seconds. If you do nothing, the system then plays the first file in each folder for 10 seconds each. After playing the first file of the last folder, the system goes to normal play.

How do I select a track/file directly from the folder and file lists on the audio display?

Press the AUDIO button to show the audio display. Touch the Track List icon to switch the display to the folder list, then select and touch a desired folder. The display changes to the file list. Then, select and touch a desired file. Touch the folder icon on the upper left of the screen to move to the parent folder.

How do I remove a disc?

Fold back the screen by pressing the OPEN button. Press the disc eject button ( ) to remove the disc. If you eject the disc, but do not remove it from the slot, the system will automatically reload it after 10 seconds and put it in pause mode. To begin playing, press the CD button.

What do I do if I see an error message in the display while playing a disc?

Press the eject button. After ejecting the disc, check it for damage or deformation. If there is no damage, insert the disc again. If there is still a problem, the error message will appear again. Press the eject button, and pull out the disc. Insert a different disc. If the new disc plays, there is a problem with the first disc. If the error message cycle repeats and you cannot clear it, take your vehicle to a dealer.

What does the error message “CD DISC ERROR” mean?

Cause: Mechanical Error. Solution: Press the eject button, and pull out the disc. Check if it is inserted correctly in the disc player. Make sure the disc is not scratched or damaged.

What does the error message “CD MECH ERROR” mean?

Cause: Mechanical Error. Solution: Press the eject button, and pull out the disc. Check the disc for damage or deformation. If the disc cannot be pulled out, or the error message does not disappear after the disc is ejected, see your dealer.

What does the error message “CD DISC” mean?

Cause: Mechanical Error. Solution: Press the eject button, and pull out the disc. Check the disc for damage or deformation.

What does the error message “CD HEAT ERROR” mean?

Cause: High Temperature. Solution: Will disappear when the temperature returns to normal.

How do I load a PC card?

Press the OPEN button beside the screen. The screen folds back, and the PC card slot appears. Insert a PC card straight into the slot. The drive will read the PC card and begin to play it. Return the screen to the upright position by pressing the CLOSE button on the edge of the screen panel.

How do I operate the PC card player?

Push the AUDIO button beside the screen to show the audio display and operate the PC card player.

How do I select a play mode?

Touch the PLAY MODE icon, then choose one of the modes by touching its icon. When a mode is selected, it is highlighted in blue.

How do I change or select tracks/files?

Each preset button’s function is shown on the bottom of the screen. Each time you press and release (preset 6), the player skips forward to the beginning of the next file. Press and release (preset 5), to skip backward to the beginning of the current file. Press it again to skip to the beginning of the previous file. To move rapidly within a file, press and hold (preset 4) or (preset 3).

How do I continuously replay a file?

Press and release the RPT button (preset 1). You will see TRACK REPEAT in the display. Press the RPT button again to turn it off.

How do I activate each repeat mode?

To activate each repeat mode, press and hold the RPT button (preset 1) for 2 seconds. You will see FOLDER REPEAT, ARTIST REPEAT or ALBUM REPEAT in the display. The system continuously replays the current folder/artist/album. Press and hold the RPT button for 2 seconds again to turn it off. Pressing the RDM button, or selecting a different folder/artist/album with the TUNE bar also turns off the repeat feature.

How do I select a different folder?

Press either side of the TUNE bar to move to the beginning of the next folder. Press the side of the TUNE bar to skip the next folder, and press the side to move to the beginning of the current folder. Press it again to skip to the beginning of the previous folder.

How do I activate track random?

Press and release the RDM button (preset 2). You will see TRACK RANDOM in the display. Press and hold the RDM button for 2 seconds to return to normal play.

How do I activate each random play?

Press the RDM button (preset 2) 2 times. You will see FOLDER RANDOM, ARTIST RANDOM or ALBUM RANDOM in the display.

How do I activate scan?

Press and release the SCAN button. You will see TRACK SCAN in the display. You will get a 10 second sampling of each file on the PC card. Press and hold the SCAN button for 2 seconds to get out of scan mode and play the last file sampled.

How do I activate each scan feature?

Press and hold the SCAN button until you hear a beep. You will see FOLDER SCAN, ARTIST SCAN or ALBUM SCAN in the display.

How do I select a file directly from the folder and track lists on the audio display?

Press the AUDIO button to show the audio display, then touch the Track List icon. The folder list menu appears on the display. To select a folder, touch its icon on the screen. The display changes to the file list. Then, select and touch a desired file. In folder mode, touch the folder icon on the upper left of the screen to move to the parent folder. The current folder is highlighted in blue.

How do I search for a song title by keyword?

Select ‘‘Song Search’’ from the track list display, the song search menu appears. In Title by Keyword mode, enter the title name, or any keyword, by touching the letter icons on the screen. Touch the List icon to begin the song search.

How do I search for a song by artist name?

Select the Artist icon, and the artist list appears. Select the desired artist, and the artist’s file list is displayed.

How do I search for a song by album name?

Select the Album icon, and the album list appears. Select the desired album, and its song list is displayed. You can then select the desired song from the list.

How do I remove a PC card?

Fold back the screen by pressing the OPEN button. Press the eject button ( ) to remove the card. If you do not remove it from the slot, you cannot return the screen to the upright position. To return the screen to the upright position, press the CLOSE button.

What do I do if I see an error message in the display while playing a PC card?

Find the solution in the chart. If you cannot clear the error message, take your vehicle to your dealer.

What does the error message “FILE ERROR” mean?

The system cannot read the file(s). Check the files in the disc. There is a possibility that the files have been damaged.

What does the error message “NO MUSIC” mean?

It appears when the PC card is empty or there are no MP3 or WMA files in the PC card. Save the MP3 or WMA files in the PC card.

What does the error message “MEDIA ERROR” mean?

It appears when the unsupported PC card is inserted. The system supports CF card, Flash ATA card, and SanDisk 6-in-1 Card Adapter.

How do I play an iPod?

Connect it to the USB adapter cable in the console compartment by using your dock connector. Press the AUDIO button beside the screen to show the audio display and touch the AUX icon. The ignition switch must be in the ACCESSORY (I) or ON (II) position. The iPod will also be recharged with the ignition switch in these positions.

How do I select the USB mode without using the icon?

Press the CD/XM button repeatedly. The status bar appears on the bottom of the screen.

How do I select a file from iPod Menu?

Press the AUDIO button to display the audio display on the navigation screen. Touch the iPod MENU icon to display the iPod menu. Select a desired list by touching the appropriate icon. Touch a desired file.

How do I select Repeat or Random Mode?

You can select any type of repeat and random modes with the RPT and RDM buttons. To confirm the selected mode, press the AUDIO button to show the audio display on the navigation screen.

How do I activate track repeat?

Press and release the RPT button (preset 1). You will see REPEAT in the display. To turn it off, press and release the RPT button again.

How do I activate track random?

Press and release the RDM button (preset 2). You will see TRACK RANDOM on the screen.

How do I activate album random?

Press and hold the RDM button (Preset 2). You will see ‘‘ALBUM RANDOM’’ in the display. To turn it off, press and hold the RDM button (Preset 2).

How do I disconnect an iPod?

Disconnect the iPod at any time when you see the ‘‘OK to disconnect’’ message in the iPod display. Always make sure you see the ‘‘OK to disconnect’’ message in the iPod display before you disconnect it. Make sure to follow the iPod’s instructions on how to disconnect the dock connector from the USB adapter cable.

What do I do if I see an error message on the screen while playing an iPod?

Find the solution in the chart. If you cannot clear the error message, take your vehicle to your dealer.

What does the error message “UNSUPPORTED” mean?

Appears when an unsupported iPod is connected.

What does the error message “NO SONG” mean?

There is no music information.

How do I play a USB Flash Memory Device?

To play a USB flash memory device, connect it to the USB adapter cable in the console compartment. The ignition switch must be in the ACCESSORY (I) or ON (II) position. Press the AUDIO button beside the screen to show the audio display and touch the AUX icon.

How do I select the USB mode without using the icon?

Press the CD/XM button repeatedly. The status bar appears on the bottom of the screen.

How do you play a USB flash memory device with a navigation system?

Connect the USB flash memory device to the USB adapter cable correctly and securely.
When the USB device is connected and the audio display is selected on the screen by pressing the AUDIO button, the AUX icon switches to the USB icon. The display also shows the folder and file numbers, and the elapsed time.
On the map screen, audio information can be viewed whenever the AUDIO INFO icon on the lower part of the screen is touched.

How do you change or select files on a USB flash memory device with a navigation system?

Use the preset buttons while a USB flash memory device is playing to select passages and change files. Each preset button’s function is shown on the bottom of the screen.
Each time you press and release preset 6, the player skips forward to the beginning of the next file. Press and release preset 5 to skip backward to the beginning of the current file. Press it again to skip to the beginning of the previous file.
To move rapidly within a file, press and hold preset 4 or preset 3.
To select a different folder, press either side of the TUNE bar. Press the side to skip to the next folder, and press the side to skip to the beginning of the previous folder.
A folder and file can also be selected from the lists shown on the screen. Press the AUDIO button to show the audio display on the navigation screen.

How do you select a file from folder and file lists?

Touch the Track List icon to switch the display to the folder list, then select and touch a desired folder.
The display changes to the file list. Then, select and touch a desired file.
Touch the folder icon on the upper left of the screen to move to the parent folder.
To scroll through the display, touch the or icon on the side of the screen. To go back to the previous display, touch the Return icon.
To select a desired icon with the joystick, move it in the appropriate direction, then press ENT.
Press the AUDIO button to go back to the normal audio playing display. Pressing the CANCEL button goes back to the previous screen, and pressing the MAP button cancels the audio display on the screen.

How do you select repeat, random, or scan mode when playing a USB flash memory device with a navigation system?

You can select any type of repeat, random, and scan modes with the RPT, RDM, and SCAN buttons. To confirm the selected mode, press the AUDIO button to show the audio control display on the navigation screen.

How do you activate folder repeat?

To activate folder repeat, press and hold the RPT button (preset 1) until you see FOLDER REPEAT in the display.

How do you turn off either repeat mode?

Press and hold the button until you hear a beep to turn off either repeat mode. Pressing either side of the TUNE bar also turns off this feature.

How do you activate track repeat?

To activate track repeat, press and release the RPT button (preset 1). You will see TRACK REPEAT in the display.

How do you activate track random?

To activate track random, press and release the RDM button (preset 2). You will see TRACK RANDOM in the display.

How do you activate folder random?

To activate folder random, press and hold the RDM button (preset 2) until you see FOLDER RANDOM in the display.

How do you activate track scan?

To activate track scan, press and release the SCAN button. You will see TRACK SCAN in the display. You will get a 10-second sampling of each track/file in the folder.

How do you activate folder scan?

To activate folder scan, press and hold the SCAN button until you see FOLDER SCAN in the display. You will get a 10 second sampling of each first track/file in the folder(s).

How do you turn off either scan mode?

Press and hold the button until you hear a beep to turn off either scan mode. Pressing either SKIP button also turns off this feature.

How do you turn off either random mode?

Press and hold the button until you hear a beep to turn off either random mode.

How do you stop playing a USB flash memory device?

To play the radio, press the AM/FM button or touch the FM1, FM2, AM, XM1, or XM2 icon. Press the CD icon to switch to the disc mode (if a disc is loaded). Each time you press the CD/XM button, the audio mode switches between the USB, disc, and XM Radio. If a PC card is in the audio unit, touch the CARD icon to play the PC card.

How do you disconnect a USB flash memory device?

You can disconnect the USB flash memory device at any time even if the USB mode is selected on the audio system. Make sure to follow the USB flash memory device’s instructions when you remove it.
When you disconnect the USB flash memory device while it is playing, the audio display (if selected) shows NO DATA.
If you reconnect the same USB flash memory device, the system will begin playing where it left off.

What do you do if you see an error message on the screen while playing a USB flash memory device?

If you see an error message on the screen while playing a USB flash memory device, find the solution in the chart. If the error message cannot be cleared, take the vehicle to a dealer.

What do you do if the audio system disables itself?

Use the preset buttons to enter the five-digit code (or a four-digit code for models with a navigation system). The code is on the radio code card included in the owner’s manual kit. When it is entered correctly, the radio will start playing.

What do you do if you make a mistake entering the code?

If you make a mistake entering the code, do not start over; complete the five-digit (or a four-digit code for models with a navigation system) sequence, then enter the correct code. You have 10 tries to enter the correct code. If you are unsuccessful in 10 attempts, you must then leave the system on for 1 hour before trying again.

How do you adjust the volume using the remote audio controls?

The VOL button adjusts the volume up () or down (). Press the top or bottom of the button, hold it until the desired volume is reached, then release it.

How do you use the CH button on the remote audio controls when listening to the radio?

Each time you press and release the top () of the button, the system goes to the next preset station on the band you are listening to. Press and release the bottom () to go back to the previous station.

How do you use the CH button on the remote audio controls when playing a disc?

The system skips to the beginning of the next track (file in MP3 or WMA format) each time you press the top () of the CH button. Press the bottom () to return to the beginning of the current track or file. Press it twice to return to the previous track or file.

How do you activate the seek function using the remote audio controls?

To activate the seek function, press and hold the top () or bottom () of the CH button until you hear a beep. The system searches up or down from the current frequency to find a station with a strong signal.

How do you use the MODE button on the remote audio controls?

Pressing the button repeatedly selects FM1, FM2, AM, disc (if a disc is loaded), or a PC card (if it is loaded). On models with XM Radio, you can also select XM1 and XM2.

How do you select AUX using the remote audio controls?

If an iPod or a USB flash memory device is plugged into the system, you can also select AUX.

How can you use the seek function to skip the folder when playing a USB flash memory device?

When playing a USB flash memory device, you can also use the seek function to skip the folder. To activate this, press and hold either side of the CH button until you hear a beep.

How do you select the auxiliary input jack?

When a compatible audio unit is connected to the jack, press the AUX button (AUX icon on models with navigation system) to select it.

How do you set the clock on models without a navigation system?

To set the time, press the CLOCK button until the displayed time begins to blink, then release the button.
Change the hours by pressing the H (preset 1) button until the numbers advance to the desired time. Change the minutes by pressing the M (preset 2) button until the numbers advance to the desired time.
Press the CLOCK button again to enter the set time.

How do you quickly set the clock to the nearest hour on models without a navigation system?

If the displayed time is before the half hour, pressing the CLOCK button until you hear a beep, then pressing the R (preset 3) button sets the clock back to the previous hour. If the displayed time is after the half hour, the clock sets forward to the beginning of the next hour.

How do you reset an activated security system before the 2 minutes have elapsed?

To reset an activated system before the 2 minutes have elapsed, unlock the driver’s door with the key or the remote transmitter.

How do you activate the security system?

For the system to activate, you must lock the doors from the outside with the key, driver’s lock tab, door lock master switch, or remote transmitter.

How do you know if the security system is set?

To see if the system is set after you exit the vehicle, press the LOCK button on the remote transmitter within 5 seconds. If the system is set, the horn will beep once.

How do you use the cruise control?

Push the CRUISE button on the steering wheel. The CRUISE MAIN indicator on the instrument panel comes on.
Accelerate to the desired cruising speed above 25 mph (40 km/h).
Press and release the SET/ DECEL button on the steering wheel. The CRUISE CONTROL indicator on the instrument panel comes on to show the system is now activated.

How can you increase the set cruising speed?

Press and hold the RES/ACCEL button. When you reach the desired cruising speed, release the button.
To increase your speed in very small amounts, tap the RES/ ACCEL button. Each time you do this, the vehicle will speed up about 1 mph (1.6 km/h).
Press and hold the SET/DECEL button. Release the button when you reach the desired speed.
Push on the accelerator pedal. Accelerate to the desired cruising speed, then press the SET/ DECEL button.

How can you decrease the set cruising speed?

To slow down in very small amounts, tap the SET/DECEL button. Each time you do this, your vehicle will slow down about 1 mph (1.6 km/h).
Tap the brake pedal lightly with your foot. The CRUISE CONTROL indicator on the instrument panel will go out. When the vehicle slows to the desired speed, press the SET/ DECEL button.

How can you cancel cruise control?

Push the CANCEL button on the steering wheel.
Tap the brake pedal.
Push the CRUISE button on the steering wheel.

How do you resume the set speed?

When you push the CANCEL button, or tap the brake or clutch pedal, the system will remember the previously set cruising speed. To return to that speed, accelerate to above 25 mph (40 km/h), and then press and release the RES/ACCEL button. The CRUISE CONTROL indicator comes on. The vehicle will accelerate to the same cruising speed as before.

How do you use HFL?

To use HFL, you need a Bluetooth-compatible cell phone.

How do you give a command or answer a call using HFL?

Press and release the HFL Talk button to give a command or answer a call.

How do you end a call, go back to the previous command, or cancel the command using HFL?

Press and release the HFL Back button to end a call, go back to the previous command, or cancel the command.

How do you make a command using HFL?

Press and release the HFL Talk button each time you want to make a command. After the beep, speak in a clear, natural tone.

How do you change the volume level of HFL?

To change the volume level of HFL, use the audio system volume knob or the steering wheel volume controls.

How do you hear general HFL information?

To hear general HFL information, including help on pairing a phone or setting up the system, say ‘‘Tutorial’’.

How do you get help at any time using HFL?

For help at any time, including a list of available commands, say ‘‘Hands free help’’.

How do you pair a cell phone to the system to use HFL?

Press and release the HFL Talk button. If you are pairing a phone for the first time, HFL will give you information about the pairing process. If it is not the first phone you are pairing, say ‘‘Phone Setup’’ and say ‘‘Pair’’.
Follow the HFL prompts and put your phone in discovery or search mode. HFL will give you a 4-digit pairing code and begin searching for your phone.
When your phone finds a Bluetooth device, select HFL from the options and enter the 4-digit code from the previous step.
Follow the HFL prompts and name the newly paired phone.

How do you rename a paired phone?

Press and release the HFL Talk button before a command.
Say ‘‘Phone setup’’.
Say ‘‘Edit’’ after the prompts.
If there is more than one phone paired to the system, HFL will ask you which phone’s name you want to change. Follow the HFL prompts and rename the phone.

How do you delete a paired phone?

Press and release the HFL Talk button before a command.
Say ‘‘Phone setup’’.
Say ‘‘Delete’’ after the prompts.
HFL will ask you which phone you want to delete. Follow the HFL prompts to continue with the deletion.

How do you hear the names of all paired phones?

Press and release the HFL Talk button before a command.
Say ‘‘Phone setup’’.
Say ‘‘List’’ after the prompts.
HFL will read out all the paired phone’s names.

How do you hear which paired phone is currently linked?

Press and release the HFL Talk button before a command.
Say ‘‘Phone setup’’.
Say ‘‘Status’’ after the prompts.
HFL will tell you which phone is linked to the system.

How do you change from the currently linked phone to another paired phone?

Press and release the HFL Talk button before a command.
Say ‘‘Phone setup’’.
Say ‘‘Next phone’’ after the prompts.
HFL disconnects the linked phone and searches for another paired phone.
Once another phone is found, it is linked to the system. HFL will inform you which phone is now linked.
If no other phones are found or paired, HFL will inform you that the original phone is linked again.

How do you change the pairing code setting?

Press and release the HFL Talk button before a command.
Say ‘‘Phone setup’’.
Say ‘‘Set pairing code’’ after the prompts.
If you want HFL to create a random code each time you pair a phone, say ‘‘Random’’. If you want to choose your own 4-digit code to be used each time, say ‘‘Fixed’’ and follow the HFL prompts.

How do you make a call using a phone number using HFL?

Press and release the HFL Talk button before a command.
Say ‘‘Call’’ or ‘‘Dial’’.
Follow the HFL prompts and say the phone number you want to dial.
Follow the HFL prompts to confirm the number and say ‘‘Dial’’ or ‘‘Call’’.
Once connected, you will hear the person you called through the audio speakers.

How do you make a call using a name in the HFL phonebook?

Press and release the HFL Talk button before a command.
Say ‘‘Call’’ or ‘‘Dial’’.
Follow the HFL prompts and say the name stored in the HFL phonebook that you want to call.
Follow the HFL prompts to confirm the name and make the call.

How do you redial the last number called by HFL?

Press and release the HFL Talk button and say ‘‘Redial’’.

How do you make a call from an imported phonebook?

Press the INFO button, then select ‘‘Cellular Phonebook’’.
Select ‘‘Search Imported Phonebook’’.
Select a phonebook you want to choose a phone number from.
If the phonebook you select is PIN-protected, you will need to enter the PIN to access it.

How do you transfer a call?

Press and release the HFL Talk button and say ‘‘Transfer’’.

How do you receive a call?

Press the HFL Talk button to answer the call, or the HFL Back button to hang up.

How do you use call waiting?

If your phone has Call Waiting, press and release the HFL Talk button to put the original call on hold and answer the incoming call. To return to the original call, press the HFL Talk button again. If you don’t want to answer the incoming call, disregard it and continue with your original call. If you want to hang up the original call and answer the new call, press the HFL Back button.

How do you send numbers or names during a call?

Press and release the HFL Talk button before a command.
Say ‘‘Send’’.
Follow the HFL prompts and say the name or number you want to send.
Follow the HFL prompts to send the tones and continue the call.

How do you mute your voice during a call?

To mute your voice during a call, press and release the HFL Talk button and say ‘‘Mute’’. To unmute your voice, press and release the HFL Talk button and say ‘‘Mute’’ again.

How do you store a phonebook entry?

Press and release the HFL Talk button before a command.
Say ‘‘Phonebook’’.
Say ‘‘Store’’ after the prompts.
Say a name you want to list as your phonebook entry.
Say the number you want to store for the name entry.
Follow the HFL prompts and say ‘‘Enter’’ to store the entry.

How do you edit the number stored in a name?

Press and release the HFL Talk button before a command.
Say ‘‘Phonebook’’.
Say ‘‘Edit’’ after the prompts.
Follow the HFL prompts and say the name entry you want to edit.
When asked, say the new number for that name.
Follow the HFL prompts to complete the edit.

How do you delete a name?

Press and release the HFL Talk button before a command.
Say ‘‘Phonebook’’.
Say ‘‘Delete’’ after the prompts.
Say the name you want to delete and follow the HFL prompts to complete the deletion.

How do you list all names in the phonebook?

Press and release the HFL Talk button before a command.
Say ‘‘Phonebook’’.
Say ‘‘List’’ after the prompts.
HFL begins reading the names in the order they were stored.
If you hear a name you want to call, immediately press the HFL Talk button and say ‘‘Call’’.

How do you store a specific phone number from your cell phone directly to the HFL phonebook?

Press and release the HFL Talk button before a command.
Say ‘‘Receive contact’’.
Follow the HFL prompts, select a number from your cell phone, and send it to HFL.
Follow the HFL prompts and name the number, or say ‘‘Discard’’ if it is not the number you want to store.
Follow the HFL prompts if you want to store another number.

How do you import cellular phonebook?

Select ‘‘Import Cellular Phonebook,’’ and HFL will begin importing the phonebook. Select ‘‘OK’’ after the import is completed.

How do you search an imported phonebook?

Select ‘‘Cellular Phonebook’’.
Select ‘‘Search Imported Phonebook’’.

How do you delete an imported phonebook?

Select a phonebook you want to delete. If the phonebook is PIN-protected, you will need to enter the 4-digit PIN number.
Select ‘‘Yes,’’ then ‘‘OK’’ to complete the deletion.

How do you add a PIN?

Select the phonebook you want. The display will change.
Enter the new 4-digit PIN. You will have to re-enter the PIN for confirmation.

How do you remove a PIN?

Select the phonebook you want. The display will change.
Enter the current PIN for this phonebook.
Select ‘‘Do not use PIN,’’ then select ‘‘OK’’ after you enter the current PIN.

How do you change the PIN to a new number?

Select the phonebook you want. The display will change.
Enter the current PIN for this phonebook.
Enter the new 4-digit PIN number. You will be asked to re-enter the PIN for verification.

How do you set a 4-digit passcode to lock the HFL system for security purposes?

Press and release the HFL Talk button before a command.
Say ‘‘System setup’’.
Say ‘‘Security’’ after the prompts.
Follow the HFL prompts and say the 4-digit passcode you want to set.
Follow the HFL prompts to confirm the number.
Say ‘‘Enter’’ after the prompts.

How do you change your security passcode?

Press and release the HFL Talk button before a command.
Say ‘‘System setup’’.
Say ‘‘Change passcode’’ after the prompts.
Follow the HFL prompts and say the new 4-digit passcode.
Follow the HFL prompts to confirm the number.
Say ‘‘Enter’’ after the prompts.

How do you select either a ring tone or a prompt as the incoming call notification?

Press and release the HFL Talk button before a command.
Say ‘‘System setup’’.
Say ‘‘Call notification’’.
Follow the HFL prompts and say ‘‘Ring tone’’ or ‘‘Prompt’’. You can also say ‘‘Off’’ for no audible incoming call notification.
Say ‘‘Enter’’ after the prompts.

How do you activate or deactivate the auto transfer function?

Press and release the HFL Talk button before a command.
Say ‘‘System setup’’.
Say ‘‘Auto transfer’’.
HFL will let you know if auto transfer is on or off, depending on the previous setting. Follow the HFL prompts to change the setting.
Say ‘‘Enter’’ after the prompts.

How do you clear the system?

Press and release the HFL Talk button before a command.
Say ‘‘System setup’’.
Say ‘‘Clear’’ after the prompts.
Follow the HFL prompts to continue to complete the clearing procedure.

How do you quickly change the language?

Press and release the HFL Talk button before a command.
Say ‘‘Quick Language Selection’’.
Follow the HFL prompts.
Say the language you want to change to in that language.
If you have not named your paired phone in the language you just selected, HFL will ask you to name it in the current language.

How do you change the system language between English and French?

Press and release the HFL Talk button before a command.
Say ‘‘Change language’’.
Follow the HFL prompts to change the language to English or French.

How do you open the fuel fill door?

To open the fuel fill door, push down the lever on the left of the driver’s seat.

How do you refuel?

Park with the driver’s side closest to the service station pump.
Remove the fuel fill cap slowly. You may hear a hissing sound as pressure inside the tank equalizes. The fuel fill cap is attached to the fuel filler with a tether. Place the cap in the holder on the fuel fill door.
Stop filling the tank after the fuel nozzle automatically clicks off. Do not try to ‘‘top off’’ the tank. This leaves some room in the fuel tank for the fuel to expand with temperature changes.
Screw the fuel fill cap back on until it clicks at least once. If you do not properly tighten the cap, the malfunction indicator lamp may come on. You will also see a ‘‘CHECK FUEL CAP’’ message on the information display.
Push the fuel fill door closed until it latches.

How do I check the oil?

Wait a few minutes after turning the engine off before you check the oil.
Remove the dipstick (orange loop).
Wipe off the dipstick with a clean cloth or paper towel.
Insert the dipstick all the way back into its hole.
Remove the dipstick again, and check the level. It should be between the upper and lower marks.

How do I close the hood?

Lift it up slightly to remove the support rod from the hole. Put the support rod back into its holding clip. Lower the hood to about a foot (30 cm) above the fender, then let it drop. Make sure it is securely latched.

How do I check the engine coolant?

Look at the coolant level in the radiator reserve tank. Make sure it is between the MAX and MIN lines. If it is below the MIN line, see the relevant page in the PDF for information on adding the proper coolant.

How do I check my fuel economy?

Fill the fuel tank until the nozzle automatically clicks off.
Reset trip counter to zero.
Record the total gallons (liters) needed to refill.
Follow one of the simple calculations provided in the PDF.

What is the recommended source of information about actual fuel economy?

Direct calculation is the recommended source of information about your actual fuel economy. Using frequency of fill-ups or taking fuel gauge readings are NOT accurate measures of fuel economy. Fuel economy may improve over the first several thousand miles (kilometers).

What factors can lower vehicle fuel economy?

Aggressive driving (hard acceleration and braking).
Excessive idling, accelerating and braking in stop-and-go traffic.
Cold engine operation (engines are more efficient when warmed up).
Driving with a heavy load or the air conditioner running.
Improperly inflated tires.

How can I improve fuel economy?

Use the recommended viscosity motor oil, displaying the API Certification Seal.
Maintain proper tire inflation.
Avoid carrying excess weight in the vehicle.
Keep the vehicle clean.
Always drive in the highest gear possible.
Drive moderately.
Observe the speed limit.
Avoid excessive idling.
Minimize the use of the air conditioning system.
Plan and combine trips.

What should I consider before installing any accessory?

Make sure the accessory does not obscure any lights, or interfere with proper vehicle operation or performance.

What should I do before installing any electronic accessory?

Have the installer contact your dealer for assistance. If possible, have your dealer inspect the final installation.

What should I follow regarding accessories and modifications?

Follow all instructions in the owner’s manual regarding accessories and modifications.

What are the steps for determining the correct load limit?

Locate the statement ‘‘The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs.’’ on your vehicle’s placard.
Determine the combined weight of the driver and passengers that will be riding in your vehicle.
Subtract the combined weight of the driver and passengers from XXX kg or XXX lbs.

What should I do with items that could be thrown around during a crash?

Store or secure all items that could be thrown around and hurt someone during a crash.

How should cargo be distributed in the trunk?

Distribute cargo evenly on the floor of the trunk, placing the heaviest items on the bottom and as far forward as possible.

What should I not put on the rear shelf?

Do not put any items on the rear shelf that could cover the IMA battery air intake. They can block your view, or be thrown around the vehicle during a crash.

What should I be sure of regarding items placed on the floor behind the front seats?

Be sure items placed on the floor behind the front seats cannot roll underneath and interfere with the proper operation of the seats, the sensors under the seats, or the driver’s ability to operate the pedals.

What should I do if I carry large items that prevent me from closing the trunk lid?

To avoid the possibility of carbon monoxide poisoning, follow the instructions on the relevant page in the PDF.

What should I keep closed while driving?

Keep the glove box closed while driving. If it is open, a passenger could injure their knees during a crash or sudden stop.

What should I make sure of regarding windows, mirrors and outside lights before driving?

Make sure all windows, mirrors, and outside lights are clean and unobstructed. Remove frost, snow, or ice.

What should I check regarding cargo before driving?

Check that any items you may be carrying are stored properly or fastened down securely.

What adjustments and checks should I perform before driving?

Check the seat adjustment.
Check the adjustment of the inside and outside mirrors.
Check the steering wheel adjustment.
Make sure the doors are securely closed and locked.
Fasten your seat belt. Check that your passengers have fastened their seat belts.
When you start the engine, check the gauges and indicators in the instrument panel.
Check that the hood and trunk are fully closed.
Visually check the tires. If a tire looks low, use a gauge to check its pressure.

What should I do when starting the engine in cold weather?

Apply the parking brake. In cold weather, turn off all electrical accessories to reduce the drain on the battery.

How do I start the engine?

Make sure the shift lever is in Park.
Press on the brake pedal.
Without touching the accelerator pedal, turn the ignition key to the START (III) position.
Do not hold the key in the START (III) position for more than 15 seconds at a time. If the engine does not start right away, pause for at least 10 seconds before trying again.

How do I shift from Park to any other position?

To shift from Park to any position, press the brake pedal, the release button on the front of the shift lever, then pull the lever. You cannot shift out of Park when the ignition switch is in the LOCK (0) or the ACCESSORY (I) position.

What must I do to shift out of Park?

To shift out of Park, you must press on the brake pedal and have your foot off the accelerator pedal. Press the release button on the front of the shift lever to move it.

What must I do to shift into Park?

You must also press the release button to shift into Park. To avoid transmission damage, come to a complete stop before shifting into Park. The shift lever must be in Park before you can remove the key from the ignition switch.

How do I shift from P to R?

Press the brake pedal and press the release button.

How do I shift from R to P?

Press the release button.

How do I shift from N to R, S to L, L to S, S to D, D to N, D to S, N to D, or R to N?

Move the lever.

How do I shift from Park to reverse?

Press the brake pedal and the release button on the front of the shift lever to shift from Park to reverse.

How do I shift from reverse to neutral?

To shift from reverse to neutral, come to a complete stop, and then shift.

When should I use the Drive (D) position?

Use this position for your normal driving. The transmission automatically adjusts to keep the engine at the best speed for driving conditions. To help the engine warm up faster, the transmission will select ratios that allow the engine to run at higher speeds when it is cold.

When should I use the Neutral (N) position?

Use neutral if you need to restart a stalled engine, or if it is necessary to stop briefly with the engine idling. Shift to the Park position if you need to leave your vehicle for any reason. Press on the brake pedal when you are moving the shift lever from neutral to another gear.

When should I use the Second (S) position?

Selecting Second shifts the transmission into a lower range of ratios for better acceleration and increased engine braking. Use Second when you are going down a steep hill.

When should I use the Low (L) position?

To shift to Low, press the release button on the front of the shift lever. Use Low to get more power when climbing, and for maximum engine braking when going down steep hills.

What happens when the vehicle reaches the maximum speed in any shift position?

When the vehicle reaches the maximum speed in any shift position, you may feel the engine cut in and out. This is caused by a limiter (112 mph, 180 km/h) in the engine’s computer controls. The engine will run normally when you reduce the speed to below the maximum.

How do I use the shift lock release?

Do this if pushing on the brake pedal and pressing the release button does not let you shift the transmission out of Park:

Put a cloth on the notch of the shift lock release slot cover to prevent scratches. Using a small flat-tip screwdriver or a metal fingernail file, carefully pry on the notch of the cover to remove it.
Insert the key in the shift lock release slot.
Push down on the key while you press the release button on the shift lever and move the shift lever out of Park to neutral.
Remove the key from the shift lock release slot, then install the cover. Make sure the notch on the cover is on the shift lever side.
Insert the key back into the ignition switch, press the brake pedal, and restart the engine.
Remove the key from the ignition switch.

What should I do after using the shift lock release?

If you need to use the shift lock release, it means your vehicle is developing a problem. Have it checked by your dealer.

What will cause the engine to restart when the Auto Idle Stop function is active?

The engine will start again when you release the brake pedal. It will also restart, even if you are still pressing the brake pedal, under these conditions:

You move the shift lever from D or N to R or L.
You press the accelerator pedal.
You are on an incline, and the vehicle begins rolling.

When will the Auto Idle Stop function activate?

Depending on environmental conditions and vehicle operation, the engine will shut off when you come to a stop. The Auto Idle Stop function may activate when you slow down. The conditions include:

The engine coolant is nearly up to normal operating temperature.
The IMA battery is charged enough to operate the system.
Outside temperature is between 10 100 degrees F.
The vehicle is not climbing a hill.
The shift lever is in D or N.
You are not pressing on the accelerator pedal.
You are pressing on the brake pedal.
Fan speed lower fan speeds, in either AUTO or manual modes.
The front window defroster is off.

What happens if I open the driver’s door when Auto Stop is active?

If you open the driver’s door when Auto Stop is active, the indicator will blink and you will hear a continuous beep. The beep will stop when you close the door.

What should I always do when getting out of the vehicle?

Always turn the ignition switch to the LOCK (0) position and remove the key if you are getting out of the vehicle.The indicator blinks as a reminder that the engine has stopped because of the Auto Idle Stop function. You cannot restart the engine with the ignition switch when this indicator is blinking.

What should I do when parking?

Make sure the windows are closed.
Turn off the lights.
Place any packages, valuables, etc., in the trunk or take them with you.
If the vehicle is facing downhill, turn the front wheels toward the curb.
If the vehicle is facing uphill, turn the front wheels away from the curb.
Set the parking brake before you put the transmission in Park. This keeps the vehicle from moving and putting pressure on the parking mechanism in the transmission.
Always use the parking brake when you park your vehicle. Make sure the parking brake is set firmly, or your vehicle may roll if it is parked on an incline.
Make sure the parking brake is fully released before driving away. Driving with the parking brake partially set can overheat or damage the rear brakes.
Lock the doors.
Check the indicator on the instrument panel to verify that the security system is set.

Where should I never park?

Never park over dry leaves, tall grass, or other flammable materials. The hot three way catalytic converter could cause these materials to catch on fire.

What should I check after driving through deep water?

Check the brakes after driving through deep water. Apply the brakes moderately to see if they feel normal. If not, apply them gently and frequently until they do. Be extra cautious in your driving.

How can I use the engine to assist the brakes when going down a long hill?

Constant application of the brakes when going down a long hill builds up heat and reduces their effective-ness. Use the engine to assist the brakes by taking your foot off the accelerator and downshifting to a lower gear.

What should I do if the brake pads need replacing?

If the brake pads need replacing, you will hear a distinctive, metallic screeching sound when you apply the brake pedal. If you do not have the brake pads replaced, they will screech all the time.

What should I do if the ABS indicator comes on?

If this indicator comes on, the anti-lock function of the braking system has shut down. The brakes still work like a conventional system, but without anti-lock. You should have your dealer inspect your vehicle as soon as possible.

What should I do if the ABS indicator comes on while driving?

If the ABS indicator comes on while driving, test the brakes as shown on the relevant page in the PDF.

What should I never do with the brake pedal when ABS is activated?

You should never pump the brake pedal.

What happens if the ABS indicator and the brake system indicator come on together, and the parking brake is fully released?

If the ABS indicator and the brake system indicator come on together, and the parking brake is fully released, the EBD system may also be shut down.

What should I do if the brakes feel normal when the ABS indicator comes on?

If the brakes feel normal, drive slowly and have your vehicle repaired by your dealer as soon as possible. Avoid sudden hard braking which could cause the rear wheels to lock up and possibly lead to a loss of control.

What should I do if the VSA indicator comes on while driving?

If this indicator comes on while driving, pull to the side of the road when it is safe, and turn off the engine. Reset the system by restarting the engine. If the VSA system indicator stays on or comes back on while driving, have the VSA system inspected by your dealer.

What should I do if the indicator does not come on when the ignition switch is turned to the ON (II) position?

If the indicator does not come on when the ignition switch is turned to the ON (II) position, there may be a problem with the VSA system. Have your dealer inspect your vehicle as soon as possible.

What happens if the low tire pressure indicator or TPMS indicator comes on?

If the low tire pressure indicator or TPMS indicator comes on, the VSA system automatically turns on even if the VSA system is turned off by pressing the VSA OFF switch. If this happens, you cannot turn the VSA system off by pressing the VSA OFF switch again.

How do I turn the VSA system on and off?

This switch is under the driver’s side vent. To turn the VSA system on and off, press and hold it until you hear a beep. When VSA is off, the VSA activation indicator comes on as a reminder. Press and hold the switch again. It turns the system back on.

When is VSA turned on?

VSA is turned on every time you start the engine, even if you turned it off the last time you drove the vehicle.

When might it be easier to free the vehicle with the VSA temporarily switched off?

In certain unusual conditions when your vehicle gets stuck in shallow mud or fresh snow, it may be easier to free it with the VSA temporarily switched off. When the VSA system is off, the traction control system is also off. You should only attempt to free your vehicle with the VSA off if you are not able to free it when the VSA is on.

What should I do immediately after freeing the vehicle with VSA off?

Immediately after freeing your vehicle, be sure to switch the VSA on again. We do not recommend driving your vehicle with the VSA and traction control systems switched off.

What should I do when the low tire pressure indicator is on?

When the low tire pressure indicator is on, one or more of your tires is significantly underinflated. You should stop and check your tires as soon as possible, and inflate them to the proper pressure as indicated on the vehicle’s tire information placard.

What should I do if I think I can safely drive a short distance to a service station when the low tire pressure indicator is on?

If you think you can safely drive a short distance to a service station, proceed slowly, and inflate the tire to the recommended pressure shown on the driver’s doorjamb.

What should I do if the tire is flat, or if the tire pressure is too low to continue driving?

If the tire is flat, or if the tire pressure is too low to continue driving, replace the tire with the compact spare tire.

What should I do if I cannot make the low tire pressure indicator go out after inflating the tires to the specified values?

If you cannot make the low tire pressure indicator go out after inflating the tires to the specified values, have your dealer check the system as soon as possible.

How often should I manually check the tire pressures?

Although your tire pressure is monitored, you must manually check the tire pressures monthly.

What should each tire be set to?

Each tire, including the spare, should be checked monthly when cold, and set to the recommended inflation pressure as specified on the tire information label and in the owner’s manual.

What does it mean if the tire pressure monitoring system (TPMS) indicator comes on and stays on?

This indicator comes on and stays on if there is a problem with the tire pressure monitoring system. If this happens, the system will shut off and no longer monitor tire pressures. Have the system checked by your dealer as soon as possible.

What happens if the low tire pressure indicator or TPMS indicator comes on?

What happens when you restart the vehicle with the compact spare tire?

When you restart the vehicle with the compact spare tire, the TPMS indicator may also come on and stay on after driving several miles (kilometers).

What happens after you replace the flat tire with the compact spare tire?

After you replace the flat tire with the compact spare tire, the low tire pressure indicator stays on. This is normal; the system is not monitoring the spare tire pressure. Manually check the spare tire pressure to be sure it is correct. After several miles (kilometers) driving with the compact spare tire, the TPMS indicator comes on and the low tire pressure indicator goes off.

What should I never use in a flat tire?

Never use a puncture-repairing agent in a flat tire. If used, you will have to replace the tire pressure sensor. Have the flat tire repaired by your dealer as soon as possible.

What should I do to eliminate potential hazards when performing maintenance?

To eliminate potential hazards, read the instructions before you begin, and make sure you have the tools and skills required.

What should I use to clean parts?

To clean parts, use a commercially available degreaser or parts cleaner, not gasoline.

What should I keep away from the battery and all fuel-related parts?

To reduce the possibility of fire or explosion, keep cigarettes, sparks, and flames away from the battery and all fuel-related parts.

What should I make sure of regarding the vehicle before performing maintenance?

Make sure your vehicle is parked on level ground, the parking brake is set, and the engine is off.

When should I not run the engine?

Do not run the engine unless instructed to do so.

What should I let cool down before touching any parts?

Let the engine and exhaust system cool down before touching any parts.

What should I wear when working with the battery or compressed air?

Wear eye protection and protective clothing when working with the battery or compressed air.

What should I do whenever I operate the engine?

Be sure there is adequate ventilation whenever you operate the engine.

How do I see the current engine oil life?

To see the current engine oil life, turn the ignition switch to the ON (II) position, and press the SEL/ RESET button repeatedly until the engine oil life display appears.

How do I change the information display from the engine oil life display?

You can change the information display from the engine oil life display to the odometer, the trip meter, or the outside temperature every time you press and release the SEL/RESET button.

How do I reset the engine oil life display?

Turn the ignition switch to the ON (II) position.
Press the SEL/RESET button repeatedly until the engine oil life is displayed.
Press the SEL/RESET button for about 10 seconds. The engine oil life and the maintenance item code(s) will blink.
Press the SEL/RESET button for more than 5 seconds. The maintenance item code(s) will disappear, and the engine oil life will reset to ‘‘100.’’

What should I check every time I fill the fuel tank?

Engine oil level.

What should I check every time I fill the fuel tank regarding the engine coolant?

Check the radiator reserve tank.

What should I check monthly?

Automatic transmission fluid level.
Brake fluid level.
Tire pressure.
Operation of the headlights, parking lights, taillights, high-mount brake light, turn signals, brake lights, and license plate light.

When should I adjust the valves?

Adjust the valves during services A, B, 1, 2, or 3 only if they are noisy.

When should I replace the brake fluid?

Independent of the maintenance messages on the information display, replace the brake fluid every 3 years.

When should I change the engine oil if the message “SERVICE” does not appear?

If the message ‘‘SERVICE’’ does not appear more than 12 months after the display is reset, change the engine oil every year.

When should I replace the air cleaner element if I drive in dusty conditions?

If you drive in dusty conditions, replace every 15,000 miles (24,000 km).

When should I replace the dust and pollen filter if I drive primarily in urban areas?

If you drive primarily in urban areas that have high concentrations of soot in the air from industry and from diesel-powered vehicles, replace every 15,000 miles (24,000 km).

How do I add engine oil?

Unscrew and remove the engine oil fill cap on the valve cover.
Pour the oil slowly and carefully so you do not spill any. Clean up any spills immediately. Spilled oil could damage components in the engine compartment.
Reinstall the engine oil fill cap, and tighten it securely.
Wait a few minutes, and recheck the oil level on the engine oil dipstick. Do not fill above the upper mark; you could damage the engine.

What kind of engine oil is recommended?

Always use a premium-grade 0W-20 detergent oil displaying the API Certification Seal. Make sure the API Certification Seal says ‘‘For Gasoline Engines’’.

What kind of engine oil is the preferred lubricant?

Honda Motor Oil is the preferred 0W-20 lubricant for your vehicle. It is highly recommended that you use Honda Motor Oil in your vehicle for optimum engine protection.

What kind of oil may be used if 0W-20 is not available?

A 5W-20 oil may be used if 0W-20 is not available.

How do I change the oil and filter?

Run the engine until it reaches normal operating temperature, then shut it off.
Open the hood, and remove the engine oil fill cap.
Remove the nine holding clips with a flat-tip screwdriver and two bolts, then pull the under-cover down.
Remove the oil drain bolt and washer from the bottom of the engine. Drain the oil into an appropriate container.
Remove the oil filter, and let the remaining oil drain. A special wrench (available from your dealer) is required.
Make sure the oil filter gasket is not stuck to the contacting surface of the engine. If it is, remove it before installing a new oil filter.
Install a new oil filter according to the instructions that come with it.
Put a new washer on the drain bolt, then reinstall the drain bolt. Tighten the drain bolt to 29 lbf·ft (39 N·m , 4.0 kgf·m).
Refill the engine with the recommended oil. Engine oil change capacity (including filter): 3.4 US qt (3.2 l).
Reinstall the engine oil fill cap. Start the engine. The oil pressure indicator should go out within 5 seconds. If it does not, turn off the engine, and check your work.
Let the engine run for several minutes, then check the drain bolt and oil filter for leaks.
Turn off the engine, let it sit for several minutes, then check the oil level on the dipstick. If necessary, add more oil.
Put the under-cover back in place and reinstall the nine holding clips. Lock the clips securely by pushing on the center of each clip.

May I use a synthetic motor oil?

You may use a synthetic motor oil if it meets the same requirements given for a conventional motor oil: it displays the API Certification Seal, and it is the proper weight. You must follow the oil and filter change intervals shown on the information display.

How do I add engine coolant?

Make sure the engine and radiator are cool.
Relieve any pressure in the cooling system by turning the radiator cap counterclockwise, without pressing down.
Remove the radiator cap by pushing down and turning counterclockwise.
If the coolant level in the reserve tank is at or below the MIN line, add coolant to bring it up to between the MIN and MAX lines. Inspect the cooling system for leaks.
Pour coolant into the reserve tank. Fill it to halfway between the MAX and MIN marks. Put the cap back on the reserve tank.
Put the radiator cap back on, and tighten it fully.

What kind of coolant should I always use?

Always use Honda Long-life Anti-freeze/Coolant Type 2. This coolant is pre-mixed with 50 percent antifreeze and 50 percent distilled water. Never add straight antifreeze or plain water.

What kind of coolant may I use if Honda antifreeze/coolant is not available?

If Honda antifreeze/coolant is not available, you may use another major-brand non-silicate coolant as a temporary replacement. Make sure it is a high-quality coolant recommended for aluminum engines. Continued use of any non-Honda coolant can result in corrosion, causing the cooling system to malfunction or fail. Have the cooling system flushed and refilled with Honda antifreeze/coolant as soon as possible.

What should I do if the reserve tank is completely empty?

If the reserve tank is completely empty, you should also check the coolant level in the radiator. The coolant level should be up to the base of the filler neck. Add coolant if it is low.

How do I refill the windshield washer reservoir?

Check the fluid level in the windshield washer reservoir at least monthly during normal use.
Check the fluid level by removing the cap and looking at the level gauge.
Fill the reservoir with a good-quality windshield washer fluid. This increases the cleaning capability and prevents freezing in cold weather.

What should I clean when refilling the reservoir?

When you refill the reservoir, clean the edges of the windshield wiper blades with windshield washer fluid on a clean cloth. This will help to condition them.

What should I not use in the windshield washer reservoir?

Do not use engine antifreeze or a vinegar/water solution in the windshield washer reservoir. Antifreeze can damage your vehicle’s paint, while a vinegar/water solution can damage the windshield washer pump. Use only commercially-available windshield washer fluid.

How do I check the continuously variable transmission (CVT) fluid?

Park the vehicle on level ground. Start the engine, let it run until the radiator fan comes on, then shut off the engine. For accurate results, wait about 60 seconds (but no longer than 90 seconds) before doing step 2.
Remove the dipstick (yellow loop) from the transmission, and wipe it with a clean cloth.
Insert the dipstick all the way into the transmission securely as shown in the illustration.
Remove the dipstick and check the fluid level. It should be between the upper and lower marks within the HOT range.
If the level is below the lower mark, add fluid into the dipstick hole to bring it to the level between the upper and lower marks.

What kind of fluid should I always use?

Always use Honda CVTF (continuously variable transmission fluid).

How should I pour the fluid?

Pour the fluid slowly and carefully so you do not spill any. Clean up any spill immediately; it could damage components in the engine compartment.

How do I check the brake fluid level?

Check the fluid level several seconds after you turn the ignition switch to the ON (II) position. The fluid level should be between the MIN and MAX marks on the side of the reservoir. If the level is at or below the MIN mark, your brake system needs attention. Have the brake system inspected for leaks or worn brake pads.

When should I replace the brake fluid?

Replace the brake fluid every 3 years, independent of the distance traveled.

What kind of brake fluid should I always use?

Always use Honda Heavy Duty Brake Fluid DOT 3. If it is not available, you should use only DOT 3 or DOT 4 fluid, from a sealed container, as a temporary replacement.

What kind of brake fluid is not compatible with the vehicle’s braking system?

Brake fluid marked DOT 5 is not compatible with your vehicle’s braking system and can cause extensive damage.

How do I replace a headlight bulb?

Open the hood. Remove the reserve tank from its holder by pulling it straight up.
To change the bulb on the driver’s side, start the engine, turn the steering wheel all the way to the right, then turn off the engine. To change the bulb on the passenger’s side, turn the steering wheel to the left.
Use a flat-tip screwdriver to remove the two holding clips from the inner fender, and pull the inner fender cover back.
Remove the electrical connector from the bulb by pushing on the tab and pulling the connector down.
Remove the bulb from the headlight assembly by turning it one-quarter turn counterclockwise.
Install the new bulb, and turn it one-quarter turn clockwise to lock it in place.
Push the electrical connector back onto the bulb. Make sure it is on all the way.
Turn on the headlights to test the new bulb.

To change a bulb on the left side, remove the coolant tube from the two clips. If you replaced a headlight bulb on the driver’s side, reinstall the engine coolant reserve tank.

How do you replace the front side marker/turn signal light bulb?

Open the trunk.
Use a flat-tip screwdriver to remove the two holding clips from the inner fender, and pull the inner fender cover back.
Remove the electrical connector from the bulb by pushing on the tab and pulling the connector down.
Remove the bulb from the socket by pushing the bulb in and turning it counterclockwise until it unlocks.
Install the new bulb in the socket and turn it clockwise to lock it in place.
Insert the socket back into the headlight assembly and turn it clockwise to lock it in place.
Reinstall the inner fender cover, then reinstall the holding clips, and lock them in place by pushing on their centers.
Turn on the lights to make sure the new bulb is working.

How do you replace the rear bulbs (in fenders)?

Open the trunk.
Use the flat-tip screwdriver to remove the screws in the center of each fastener on the side of the trunk lining. Remove the fasteners first, then pull the lining back carefully.
Determine which of the four bulbs is burned out: stop/taillight, back-up light, side marker light, or turn signal light.
Remove the socket by turning it one-quarter turn counterclockwise.
Pull the bulb straight out of its socket.
Push the new bulb straight into the socket until it bottoms.
Reinstall the socket into the light assembly by turning it clockwise until it locks.
Put the fasteners into the holes on the side of the trunk lining and reinstall the screws.
Reinstall the trunk lining, making sure it is installed under the edge of the trunk seal.

How do you replace rear bulbs (in trunk lid)?

Open the trunk.
Use the Phillips-head screwdriver to remove the screws in the center of each fastener on the back of the boot lid. Remove the fasteners first, then pull the lining back carefully.
Remove the socket by turning it one-quarter turn counterclockwise.
Pull the bulb straight out of its socket.
Push the new bulb straight into the socket until it bottoms.
Insert the socket back into the light assembly and turn it clockwise to lock it in place.
Push the trunk lid trim back into position.
Put the fasteners into the holes on the trunk lid trim and reinstall the screws.
Turn on the lights to make sure the new bulb is working.

How do you replace a wiper blade?

Raise each wiper arm off the windshield, lifting the driver’s side first, then the passenger’s side. Do not open the hood when the wiper arms are raised, or you will damage the hood and wiper arms.
Disconnect the blade assembly from the wiper arm:
- Put a cloth on the edge of the lock tab to prevent scratches, then push up on the lock tab carefully with a flat-tip screwdriver.
- Pivot the blade assembly toward the wiper arm until it releases from the wiper arm.
Remove the blade from its holder by grabbing the tabbed end of the blade and pull firmly until the tabs come out of the holder.
Examine the new wiper blades. If they have no plastic or metal reinforcement along the back edge, remove the metal reinforcement strips from the old wiper blade, and install them in the slots along the edge of the new blade. Make sure the three rubber tabs inside the blade fit to each notch of the reinforcement, as shown.
Place the top of the wiper blade on the end of the blade assembly, and slide the blade onto the assembly in the direction pointed to by the arrow. Make sure the tab on the blade assembly fits in the indent of the wiper blade and the blade is completely installed.
Slide the wiper blade assembly onto the wiper arm. Make sure it locks in place.
Make sure the blade is completely installed and that its edge is not bunched up.
Lower the wiper arm down against the windshield, the passenger’s side first, then the driver’s side.

What should you check for every time you check tire inflation?

Every time you check inflation, you should also examine the tires for damage, foreign objects, and wear.

Bumps or bulges in the tread or side of the tire. Replace the tire if you find either of these conditions.
Cuts, splits, or cracks in the side of the tire. Replace the tire if you can see fabric or cord.
Excessive tread wear.

How do you clean the wheels?

Clean the wheels as you would the rest of the exterior, using the same solution and rinsing thoroughly. Use a mild detergent and a soft brush or sponge to clean the wheels.

What should you do to prepare your vehicle for storage for an extended period?

Fill the fuel tank.
Wash and dry the exterior completely.
Clean the interior, ensuring carpeting and floor mats are completely dry.
Leave the parking brake off and put the transmission in Park.
Block the rear wheels.
Support the vehicle on jack stands if stored for a longer period so the tires are off the ground.
Leave one window open slightly if storing the vehicle indoors.
Disconnect the 12 volt battery.
Support the front wiper blade arms with a folded towel or rag so they do not touch the windshield.
Apply a silicone spray lubricant to all door and trunk seals, and apply a vehicle body wax to painted surfaces that mate with the door and trunk seals to minimize sticking.
Cover the vehicle with a breathable cover made from a porous material like cotton, as non-porous materials can trap moisture and damage the paint.

How do you check the 12 volt battery?

Check the condition of the 12 volt battery monthly by looking at the test indicator window. The label on the battery explains the test indicator’s colors.

How do you remove corrosion from battery terminals?

Cover the terminals with a solution of baking soda and water, allowing it to bubble up and turn brown. Once bubbling stops, wash it off with plain water, dry the battery, and coat the terminals with grease to help prevent further corrosion.

How do you change a flat tire?

If you have a flat tire while driving, stop in a safe place to change it. Drive slowly along the shoulder until you get to an exit or an area to stop that is far away from the traffic lanes.
Park the vehicle on firm, level, and non-slippery ground. Put the transmission in Park and apply the parking brake.
Turn on the hazard warning lights and turn the ignition switch to the LOCK (0) position. Have all passengers get out of the vehicle while you change the tire.
Open the trunk and raise the trunk floor by lifting up on the back edge.
Take the tool case out of the spare tire.
Unscrew the wing bolt and take the spare tire out of its well.
Loosen each wheel nut 1/2 turn with the wheel nut wrench.
Remove the center cap from the wheel with the extension.
Place the jack under the jacking point nearest the tire you need to change. Turn the end bracket clockwise until the top of the jack contacts the jacking point. Make sure the jacking point tab is resting in the jack notch.
Use the extension and the wheel nut wrench as shown to raise the vehicle until the flat tire is off the ground.
Remove the wheel nuts, then remove the flat tire. Handle the wheel nuts carefully; they may be hot from driving. Place the flat tire on the ground with the outside surface facing up.
Before mounting the spare tire, wipe any dirt off the mounting surface of the wheel and hub with a clean cloth. Wipe the hub carefully; it may be hot from driving.
Put on the spare tire. Put the wheel nuts back on finger-tight, then tighten them in a crisscross pattern with the wheel nut wrench until the wheel is firmly against the hub. Do not try to tighten the wheel nuts fully.
Lower the vehicle to the ground, and remove the jack.
Tighten the wheel nuts securely in the same crisscross pattern. Have the wheel nut torque checked at the nearest automotive service facility. Tighten the wheel nuts to 80 lbf·ft (108 N·m , 11 kgf·m).
Place the flat tire face down in the spare tire well.
Remove the spacer cone from the wing bolt, turn it over, and put it back on the bolt.
Secure the flat tire by screwing the wing bolt back into its hole.
Store the jack in the tool case.
Store the center cap in the trunk. Make sure it does not get scratched or damaged.
Lower the trunk floor, then close the trunk lid.

What do you do if the engine won’t start?

Diagnosing why the engine won’t start falls into two areas, depending on what you hear when you turn the ignition switch to the START (III) position:

You hear nothing, or almost nothing. The engine’s starter motor does not operate at all, or operates very slowly.
You can hear the starter motor operating normally, or the starter motor sounds like it is spinning faster than normal, but the engine does not start up and run.

What should you check if nothing happens or the starter motor operates very slowly when trying to start the engine?

Check the transmission interlock. The transmission must be in Park or neutral or the starter will not operate.
Turn the ignition switch to the ON (II) position. Turn on the headlights, and check their brightness. If the headlights are very dim or do not come on at all, the battery is discharged.
Turn the ignition switch to the START (III) position. If the headlights do not dim, check the condition of the fuses. If the fuses are OK, there is probably something wrong with the electrical circuit for the ignition switch or starter motor. You will need a qualified technician to determine the problem.
Are you using a properly coded key? An improperly coded key will cause the immobilizer system indicator in the instrument panel to blink rapidly.

What should you check if the starter operates normally, but the engine won’t start?

Are you using the proper starting procedure?
Do you have fuel? Check the fuel gauge; the low fuel indicator may not be working.
There may be an electrical problem, such as no power to the fuel pump. Check all the fuses.

How do you jump start your vehicle?

Open the hood, and check the physical condition of the 12 volt battery.
Turn off all electrical accessories: heater, A/C, climate control, audio system, lights, etc. Put the transmission in Park, and set the parking brake.
Connect one jumper cable to the positive (+) terminal on your battery. Connect the other end to the positive (+) terminal on the booster battery.
Connect the second jumper cable to the negative (-) terminal on the booster battery. Connect the other end to the grounding strap as shown. Do not connect this jumper cable to any other part of the engine.
If the booster battery is in another vehicle, have an assistant start that vehicle and run it at a fast idle.
Start the vehicle. If the starter motor still operates slowly, check that the jumper cables have good metal-to-metal contact.
Once your vehicle is running, disconnect the negative cable from your vehicle, then from the booster battery. Disconnect the positive cable from your vehicle, then from the booster battery.

What should you do if your vehicle overheats?

Safely pull to the side of the road. Put the transmission in Park, and set the parking brake.
Turn off all the accessories, and turn on the hazard warning lights.
If you see steam and/or spray coming from under the hood, turn off the engine. Wait until you see no more signs of steam or spray, then open the hood.
If you do not see steam or spray, leave the engine running, and watch the temperature gauge. If the high heat is due to overloading, the engine should start to cool down almost immediately. If it does, wait until the temperature gauge reading comes down to the midpoint, then continue driving.
If the temperature gauge stays at the red mark, turn off the engine.
Let the engine cool down until the reading reaches the middle of the temperature gauge or lower before checking the radiator.
Look for any obvious coolant leaks, such as a split radiator hose. Everything is still extremely hot, so use caution. If you find a leak, it must be repaired before you continue driving.
If you don’t find an obvious leak, check the coolant level in the radiator reserve tank. Add coolant if the level is below the MIN mark.
If there was no coolant in the reserve tank, you may need to add coolant to the radiator.
Using gloves or a large heavy cloth, turn the radiator cap counterclockwise, without pushing down, to the first stop. After the pressure releases, push down on the cap, and turn it until it comes off.
Start the engine, and set the interior temperature to maximum. Add coolant to the radiator up to the base of the filler neck. If you do not have the proper coolant mixture available, you can add plain water. Remember to have the cooling system drained and refilled with the proper mixture as soon as you can.
Put the radiator cap back on tightly. Run the engine, and check the temperature gauge. If it goes back to the red mark, the engine needs repair.
If the temperature stays normal, check the coolant level in the radiator reserve tank. If it has gone down, add coolant to the MAX mark. Put the cap back on tightly.

What should you do if the low oil pressure indicator comes on?

Safely pull off the road, and shut off the engine. Turn on the hazard warning lights.
Let the vehicle sit for a minute. Open the hood, and check the oil level. An engine very low on oil can lose pressure during cornering and other driving maneuvers.
If necessary, add oil to bring the level back to the full mark on the dipstick.
Start the engine and watch the oil pressure indicator. If it does not go out within 10 seconds, turn off the engine. There is a mechanical problem that needs to be repaired before you can continue driving.

How do you check and replace fuses?

Turn the ignition switch to the LOCK (0) position. Make sure the headlights and all other accessories are off.
Remove the cover from the fuse box.
Check each of the large fuses in the primary under-hood fuse box by looking through the top at the wire inside. Remove the screws with a Phillips-head screwdriver.
Check the smaller fuses in the under-hood fuse boxes and all the fuses in the interior fuse box by pulling out each one with the fuse puller provided in the primary under-hood fuse box.
Look for a blown wire inside the fuse. If it is blown, replace it with one of the spare fuses of the same rating or lower. The spare fuses are provided on the back of the under-hood fuse cover.
If you cannot drive the vehicle without fixing the problem, and you do not have a spare fuse, take a fuse of the same rating or a lower rating from one of the other circuits. Make sure you can do without that circuit temporarily (such as the accessory power socket or radio).
If you replace the blown fuse with a spare fuse that has a lower rating, it might blow out again. This does not indicate anything wrong. Replace the fuse with one of the correct rating as soon as you can.
If the replacement fuse of the same rating blows in a short time, there is probably a serious electrical problem with your vehicle. Leave the blown fuse in that circuit, and have your vehicle checked by a qualified technician.

How do you tow the vehicle in an emergency?

If, due to damage, your vehicle must be towed with the front wheels on the ground, do this:

Start the engine.
Press on the brake pedal.
Move the shift lever through all its positions.
Shift to D position and hold for 5 seconds, then to N.
Turn off the engine.
Release the parking brake.
Leave the ignition switch in the ACCESSORY (I) position so the steering wheel does not lock.

How do you test readiness codes?

Make sure the gas tank is nearly, but not completely, full (around 3/4).
Make sure the vehicle has been parked with the engine off for 6 hours or more.
Make sure the ambient temperature is between 40° and 95°F (4° and 35°C).
Without touching the accelerator pedal, start the engine, and let it idle for 20 seconds.
Keep the vehicle in Park. Increase the engine speed to 2,000 rpm, and hold it there until the temperature gauge rises to at least 1/4 of the scale (about 3 minutes).
Without touching the accelerator pedal, let the engine idle for 20 seconds.
Select a nearby lightly traveled major highway where you can maintain a speed of 50 to 60 mph (80 to 97 km/h) for at least 20 minutes. Drive on the highway in D. Do not use the cruise control. When traffic allows, drive for 90 seconds without moving the accelerator pedal. (Vehicle speed may vary slightly; this is okay.) If you cannot do this for a continuous 90 seconds because of traffic conditions, drive for at least 30 seconds, then repeat it two more times (for a total of 90 seconds).
Then drive in city/suburban traffic for at least 10 minutes. When traffic conditions allow, let the vehicle coast for several seconds without using the accelerator pedal or the brake pedal.
Make sure the vehicle has been parked with the engine off for 30 minutes.

CLICK HERE TO DOWNLOAD HONDA CIVIC HYBRID 2010 (01) PDF MANUAL

HONDA CIVIC HYBRID 2010 (01) PDF SUMMARY:

Visitors also searched:

Leave comments, questions, reviews, tips, tricks, hacks or page errors below. Account not required.Cancel reply

Discover more from Manual-Hub.com